Vinyl fence cost in Lincoln, NE
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,250 – $8,550
- Per linear ft
- $28 – $56
- before permit
- Versus US midpoint
- −7%
- US $6,850
- Rank of 300 metros
- #237
- 1 = most expensive
Lincoln homeowners pay roughly $4,250 to $8,550 to install a vinyl fence at 150 linear ft, or $28 to $56 per linear ft (permit not included). Against the US midpoint, Lincoln is 7% lower. Building materials run about 6% below the US average here (BEA goods price index 94.1).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Lincoln, NE, standard level
$5,550 to $7,250
About $36.50 to $47.50 per linear ft before permits. Labor is about 21% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,400 | $5,500 |
| Labor | $1,100 | $1,650 |
| Permits and fees | $65 | $110 |
| Total | $5,550 | $7,250 |
Cost breakdown for 150 linear ft in Lincoln, NE
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,550 | $4,950 | $6,350 | 77% |
| Labor | $680 | $1,350 | $2,050 | 21% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $4,250 | $6,400 | $8,550 | 100% |
Why Lincoln prices look the way they do
Labor is 21% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Lincoln the blended ratio comes out at 0.91.
On the materials line, the BEA goods price index for the Lincoln metro is 94.1 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,950, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (91.6) and land at $35 to $140.
Related projects, priced for Lincoln
Because every project leans on different trades, Lincoln's wage level does not move all prices equally. Against the US midpoint, concrete slab runs −7% and wood fence −8%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,800 – $7,050 | −8% |
| Chain-link fence | 150 linear ft | $1,450 – $5,700 | −7% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Concrete slab | 400 sq ft | $2,300 – $4,850 | −7% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Lincoln is 0.91 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $24.00 an hour, which is 18% below the national $29.12. The middle half of them earn between $21.70 and $28.77 an hour. BLS counts 1,020 of them working in the area, 55.9 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 50% of the weighting: a median of $22.45 an hour, in line with the US median of $22.66. The middle half of them earn between $19.28 and $24.46 an hour. About 1,250 work in the metro. That is 68.4 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.77 an hour) instead of the median, the labor line grows by about $120. At the 25th percentile ($21.70) it shrinks by about $60. The total moves by 1.9% or 0.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 182,620 jobs in the Lincoln area. That makes it the 126th largest of the 300 metros we cover, with 0.12% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.70 | $24.00 | $28.77 | $29.12 | 0.82 | metro |
| Construction laborers (47-2061) | 50% | $19.28 | $22.45 | $24.46 | $22.66 | 0.99 | metro |
| Blended | 100% | 0.91 | |||||
Lincoln against nearby metros and the rest of Nebraska
Of the five closest metros, 1 is cheaper than Lincoln. Topeka is the lowest at about $6,400 (midpoint, 150 linear ft), 135 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Lincoln, NEthis page | $4,250 – $8,550 | $6,400 | |
| Omaha, NE55 miles | $4,300 – $8,600 | $6,450 | +1% |
| Sioux City, IA120 miles | $4,250 – $8,600 | $6,400 | +1% |
| Topeka, KS135 miles | $4,250 – $8,550 | $6,400 | level |
| Des Moines, IA170 miles | $4,350 – $8,800 | $6,550 | +3% |
| Kansas City, MO185 miles | $4,350 – $8,850 | $6,600 | +3% |
| Nebraska (statewide) | $4,250 – $8,550 | $6,400 | level |
| United States | $4,550 – $9,150 | $6,850 | +7% |
Across 300 US metros, Lincoln comes in at #237 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Lincoln is 0% below the Nebraska figure.
Other Nebraska metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Omaha, NE | 498,100 jobs | $4,300 – $8,600 | $6,450 | +1% |
Cities with a workforce like Lincoln's
Big cities and small ones price differently, so here is Lincoln against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| York, PA | 183,590 jobs | $4,600 – $9,250 | $6,900 | +8% |
| Asheville, NC | 180,620 jobs | $4,350 – $8,750 | $6,550 | +3% |
| Tallahassee, FL | 186,160 jobs | $4,250 – $8,450 | $6,350 | −1% |
| Davenport, IA | 180,450 jobs | $4,350 – $8,900 | $6,650 | +4% |
Vinyl fence: what moves the price in Lincoln
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Pick a size, pick a tier: vinyl fence pricing in Lincoln
Three bands are cut from the same cited range and localized for Lincoln wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,250 to $5,950
4-ft picket or ranch rail
Standard
$5,550 to $7,250
6-ft privacy fence, standard white
Premium
$6,800 to $8,550
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,850 – $4,000 | $3,700 – $4,850 | $4,600 – $5,750 |
| 150 ft (150 linear ft) | $4,250 – $5,950 | $5,550 – $7,250 | $6,800 – $8,550 |
| 200 ft (200 linear ft) | $5,650 – $7,900 | $7,350 – $9,600 | $9,050 – $11,300 |
| full lot (300 linear ft) | $8,450 – $11,800 | $11,000 – $14,400 | $13,500 – $16,900 |
When to schedule vinyl fence in Lincoln
We use NOAA's 1991-2020 climate normals for Lincoln Muni Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Lincoln (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Lincoln gets about 29 inches of precipitation in a normal year, including roughly 26 inches of snow. The wettest months are May, June and August (4.9 inches in May). Inside the workable window, March and November are the driest, at 1.6 and 1.3 inches. The station averages about 42 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 36 | 14 | 0.7 | Cold |
| Feb | 41 | 18 | 0.9 | Cold |
| Mar | 54 | 29 | 1.6 | Workable |
| Apr | 65 | 39 | 2.7 | Workable |
| May | 75 | 51 | 4.9 | Workable |
| Jun | 85 | 62 | 4.5 | Workable |
| Jul | 89 | 67 | 3.3 | Workable |
| Aug | 87 | 64 | 3.3 | Workable |
| Sep | 80 | 54 | 2.9 | Workable |
| Oct | 67 | 41 | 2.1 | Workable |
| Nov | 52 | 28 | 1.3 | Workable |
| Dec | 39 | 18 | 1.2 | Cold |
Optional extras in Lincoln
Extras are quoted nationally and then scaled to Lincoln by the average of the local wage index (0.91) and goods index (0.94), a factor of 0.92. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $720 |
| Remove old fence | $1,400 – $2,750 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,550 to $7,250 for Lincoln, NE is attached.
Detailed vinyl fence report for Lincoln, NE, $9
The report lays out the vinyl fence numbers for Lincoln, NE line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Lincoln: your questions
+How much does it cost to install a vinyl fence in Lincoln?
For 150 linear ft, expect $4,250 to $8,550 in the Lincoln area. A standard-spec job lands at $5,550 to $7,250. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Lincoln?
About $28 to $56 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Lincoln or Omaha?
Omaha is 55 miles away. The midpoint for 150 linear ft there is $6,450, which is 1% more than Lincoln ($6,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Lincoln?
About 21% at the midpoint, or $1,350 out of $6,400. Materials are 77% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Lincoln?
$5,650 to $11,300. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Lincoln?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Lincoln area (our national range of $40 to $150 scaled by the local price level).
+Is Lincoln expensive for vinyl fence compared with the rest of Nebraska?
Lincoln is 0% below the Nebraska statewide estimate ($6,400 at the midpoint). We cover 2 metros in Nebraska; see the state page to compare them.
+What do carpenters earn in Lincoln?
The BLS median is $24.00 an hour in the Lincoln area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.70 to $28.77.
+What do basic and premium vinyl fence work cost in Lincoln?
For 150 linear ft, basic work runs $4,250 to $5,950 and premium work $6,800 to $8,550. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Lincoln?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Lincoln?
$140 to $720, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Lincoln
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.