Vinyl fence cost in Asheville, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,350 – $8,750
- Per linear ft
- $29 – $57.50
- before permit
- Versus US midpoint
- −4%
- US $6,850
- Rank of 300 metros
- #154
- 1 = most expensive
Asheville homeowners pay roughly $4,350 to $8,750 to install a vinyl fence at 150 linear ft, or $29 to $57.50 per linear ft (permit not included). Against the US midpoint, Asheville is 4% lower. Building materials run about 3% below the US average here (BEA goods price index 96.6).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Asheville, NC, standard level
$5,700 to $7,450
About $37.50 to $49 per linear ft before permits. Labor is about 21% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,650 |
| Labor | $1,100 | $1,650 |
| Permits and fees | $70 | $110 |
| Total | $5,700 | $7,450 |
Cost breakdown for 150 linear ft in Asheville, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,050 | $6,500 | 77% |
| Labor | $700 | $1,400 | $2,100 | 21% |
| Permits and fees | $40 | $90 | $140 | 1% |
| Total | $4,350 | $6,550 | $8,750 | 100% |
Where the Asheville price comes from
We price the labor side from BLS wage data for 2 trades: carpenters at 50%, construction laborers at 50%. Weighted together, Asheville wages are 0.93 times the national level. Labor makes up about 21% of the midpoint estimate (22% at national prices).
On the materials line, the BEA goods price index for the Asheville metro is 96.6 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,050, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (96.5) and land at $40 to $140.
Is Asheville cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. Asheville is the priciest of the group. Johnson City is the cheapest at $6,400.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Asheville, NCthis page | $4,350 – $8,750 | $6,550 | |
| Johnson City, TN45 miles | $4,250 – $8,500 | $6,400 | −3% |
| Hickory, NC65 miles | $4,300 – $8,600 | $6,450 | −1% |
| Greenville, SC65 miles | $4,300 – $8,650 | $6,450 | −1% |
| Spartanburg, SC70 miles | $4,300 – $8,600 | $6,450 | −2% |
| Kingsport, TN70 miles | $4,300 – $8,600 | $6,450 | −2% |
| North Carolina (statewide) | $4,300 – $8,650 | $6,500 | −1% |
| United States | $4,550 – $9,150 | $6,850 | +4% |
Across 300 US metros, Asheville comes in at #154 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Asheville is 1% above the North Carolina figure.
Other North Carolina metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $4,350 – $8,700 | $6,500 | level |
| Raleigh, NC | 743,120 jobs | $4,350 – $8,700 | $6,500 | −1% |
| Greensboro, NC | 365,410 jobs | $4,300 – $8,550 | $6,400 | −2% |
| Durham, NC | 344,020 jobs | $4,350 – $8,750 | $6,550 | level |
| Winston, NC | 271,980 jobs | $4,300 – $8,600 | $6,450 | −2% |
| Wilmington, NC | 191,280 jobs | $4,350 – $8,700 | $6,550 | level |
Cities with a workforce like Asheville's
Big cities and small ones price differently, so here is Asheville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lincoln, NE | 182,620 jobs | $4,250 – $8,550 | $6,400 | −3% |
| Davenport, IA | 180,450 jobs | $4,350 – $8,900 | $6,650 | +1% |
| York, PA | 183,590 jobs | $4,600 – $9,250 | $6,900 | +6% |
| Lafayette, LA | 179,570 jobs | $4,150 – $8,250 | $6,200 | −5% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Asheville is 0.93 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $24.66 an hour, which is 15% below the national $29.12. The middle half of them earn between $20.76 and $29.67 an hour. BLS counts 750 of them working in the area, 41.5 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 50% of the weighting: a median of $22.85 an hour, in line with the US median of $22.66. The middle half of them earn between $18.46 and $23.75 an hour. About 1,340 work in the metro. That is 74.2 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($29.67 an hour) instead of the median, the labor line grows by about $130. At the 25th percentile ($20.76) it shrinks by about $100. The total moves by 2.0% or 1.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 180,620 jobs in the Asheville area. That makes it the 127th largest of the 300 metros we cover, with 0.12% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $20.76 | $24.66 | $29.67 | $29.12 | 0.85 | metro |
| Construction laborers (47-2061) | 50% | $18.46 | $22.85 | $23.75 | $22.66 | 1.01 | metro |
| Blended | 100% | 0.93 | |||||
Optional extras in Asheville
Extras are quoted nationally and then scaled to Asheville by the average of the local wage index (0.93) and goods index (0.97), a factor of 0.95. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $740 |
| Remove old fence | $1,400 – $2,850 |
Pick a size, pick a tier: vinyl fence pricing in Asheville
Three bands are cut from the same cited range and localized for Asheville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,350 to $6,100
4-ft picket or ranch rail
Standard
$5,700 to $7,450
6-ft privacy fence, standard white
Premium
$7,000 to $8,750
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,900 – $4,100 | $3,800 – $5,000 | $4,700 – $5,900 |
| 150 ft (150 linear ft) | $4,350 – $6,100 | $5,700 – $7,450 | $7,000 – $8,750 |
| 200 ft (200 linear ft) | $5,800 – $8,150 | $7,550 – $9,900 | $9,300 – $11,600 |
| full lot (300 linear ft) | $8,700 – $12,200 | $11,300 – $14,800 | $13,900 – $17,400 |
Why two Asheville quotes can differ
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Planning more than one job in Asheville?
Because every project leans on different trades, Asheville's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs −5% and concrete slab −8%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,850 – $7,250 | −6% |
| Chain-link fence | 150 linear ft | $1,450 – $5,850 | −5% |
| Aluminum fence | 150 linear ft | $3,600 – $10,800 | −5% |
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −8% |
When to schedule vinyl fence in Asheville
We use NOAA's 1991-2020 climate normals for Asheville (5 miles from the city center). These are 30-year monthly averages, not forecasts.
Weather is not a serious constraint for exterior installation in Asheville: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Asheville gets about 41 inches of precipitation in a normal year, including roughly 12 inches of snow. The wettest months are April, July and September (4.1 inches in July). The station averages about 16 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 48 | 29 | 3.3 | Workable |
| Feb | 52 | 32 | 2.9 | Workable |
| Mar | 59 | 38 | 3.5 | Workable |
| Apr | 69 | 46 | 3.7 | Workable |
| May | 76 | 54 | 3.5 | Workable |
| Jun | 83 | 61 | 3.4 | Workable |
| Jul | 86 | 65 | 4.1 | Workable |
| Aug | 85 | 64 | 3.6 | Workable |
| Sep | 79 | 58 | 3.7 | Workable |
| Oct | 69 | 47 | 2.6 | Workable |
| Nov | 59 | 37 | 3.0 | Workable |
| Dec | 51 | 32 | 3.3 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,700 to $7,450 for Asheville, NC is attached.
Detailed vinyl fence report for Asheville, NC, $9
The report lays out the vinyl fence numbers for Asheville, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Asheville: your questions
+How much does it cost to install a vinyl fence in Asheville?
For 150 linear ft, expect $4,350 to $8,750 in the Asheville area. A standard-spec job lands at $5,700 to $7,450. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Asheville?
About $29 to $57.50 per linear ft for materials and labor, plus $40 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Asheville or Johnson City?
Johnson City is 45 miles away. The midpoint for 150 linear ft there is $6,400, which is 3% less than Asheville ($6,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Asheville?
About 21% at the midpoint, or $1,400 out of $6,550. Materials are 77% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Asheville?
$5,800 to $11,600. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Asheville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $140 for fees in the Asheville area (our national range of $40 to $150 scaled by the local price level).
+Is Asheville expensive for vinyl fence compared with the rest of North Carolina?
Asheville is 1% above the North Carolina statewide estimate ($6,500 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do carpenters earn in Asheville?
The BLS median is $24.66 an hour in the Asheville area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.76 to $29.67.
+What do basic and premium vinyl fence work cost in Asheville?
For 150 linear ft, basic work runs $4,350 to $6,100 and premium work $7,000 to $8,750. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+Is there a bad season to install a vinyl fence in Asheville?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Asheville?
$140 to $740, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Asheville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.