Vinyl fence cost in Greensboro, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,550
- Per linear ft
- $28.50 – $56
- before permit
- Versus US midpoint
- −6%
- US $6,850
- Rank of 300 metros
- #230
- 1 = most expensive
A vinyl fence in Greensboro, NC usually costs $4,300 to $8,550 for 150 linear ft. That works out to about $28.50 to $56 per linear ft before permits. Compared with the national midpoint that is $430 less. Carpenters earn a median of $24.00 an hour in the Greensboro area, 18% below the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Greensboro, NC, standard level
$5,550 to $7,250
About $36.50 to $47.50 per linear ft before permits. Labor is about 20% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,650 |
| Labor | $1,000 | $1,500 |
| Permits and fees | $70 | $110 |
| Total | $5,550 | $7,250 |
Cost breakdown for 150 linear ft in Greensboro, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,050 | $6,500 | 79% |
| Labor | $630 | $1,250 | $1,900 | 20% |
| Permits and fees | $35 | $90 | $140 | 1% |
| Total | $4,300 | $6,400 | $8,550 | 100% |
Why Greensboro prices look the way they do
The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $24.00 an hour. Add the other trades involved and the blended wage index for Greensboro is 0.84 (US = 1.00), which puts labor at 20% of the total.
Materials are scaled with BEA's regional price parity for goods. Greensboro is at 96.6 against 100 for the US, so a materials line of $5,250 nationally becomes $5,050 here (midpoint, 150 linear ft). Permits follow the all-items index of 92.9: $35 to $140.
Optional extras in Greensboro
Add-ons start from national price ranges and are scaled by 0.90 for Greensboro, which is the average of the area's wage index (0.84) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $700 |
| Remove old fence | $1,350 – $2,700 |
Planning more than one job in Greensboro?
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Greensboro wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−7%) and chain-link fence lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,000 | −9% |
| Chain-link fence | 150 linear ft | $1,400 – $5,450 | −11% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Concrete slab | 400 sq ft | $2,200 – $4,700 | −10% |
Cost by quality level and size in Greensboro
The cited range is split into basic, standard and premium bands, then scaled to Greensboro. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,000
4-ft picket or ranch rail
Standard
$5,550 to $7,250
6-ft privacy fence, standard white
Premium
$6,850 to $8,550
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,850 – $4,000 | $3,750 – $4,900 | $4,600 – $5,750 |
| 150 ft (150 linear ft) | $4,300 – $6,000 | $5,550 – $7,250 | $6,850 – $8,550 |
| 200 ft (200 linear ft) | $5,700 – $7,950 | $7,400 – $9,650 | $9,100 – $11,300 |
| full lot (300 linear ft) | $8,550 – $11,900 | $11,100 – $14,400 | $13,600 – $17,000 |
Greensboro weather and the vinyl fence calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Greensboro Wtp (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Greensboro: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Greensboro gets about 46 inches of precipitation in a normal year. The wettest months are June, July and August (5.8 inches in July). The station averages about 42 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 50 | 30 | 3.2 | Workable |
| Feb | 54 | 33 | 2.5 | Workable |
| Mar | 62 | 39 | 3.7 | Workable |
| Apr | 71 | 48 | 3.6 | Workable |
| May | 79 | 58 | 3.3 | Workable |
| Jun | 85 | 65 | 5.1 | Workable |
| Jul | 89 | 71 | 5.8 | Workable |
| Aug | 87 | 68 | 4.5 | Workable |
| Sep | 81 | 61 | 4.4 | Workable |
| Oct | 71 | 49 | 3.2 | Workable |
| Nov | 61 | 39 | 3.0 | Workable |
| Dec | 53 | 33 | 3.4 | Workable |
What local crews earn in Greensboro
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Greensboro the blend is 0.84.
Carpenters (47-2031), 50% of the weighting: a median of $24.00 an hour, 18% below the US median of $29.12. The middle half of them earn between $19.49 and $28.58 an hour. About 760 work in the metro. That is 20.8 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $19.28 an hour, which is 15% below the national $22.66. The middle half of them earn between $17.65 and $23.22 an hour. BLS counts 2,190 of them working in the area, 59.9 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $120. That is a swing of roughly 1.8% to 1.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Greensboro-High Point has 365,410 jobs in total (BLS, May 2025), ranking 71st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $19.49 | $24.00 | $28.58 | $29.12 | 0.82 | metro |
| Construction laborers (47-2061) | 50% | $17.65 | $19.28 | $23.22 | $22.66 | 0.85 | metro |
| Blended | 100% | 0.84 | |||||
Is Greensboro cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,400 to $6,550 across Greensboro and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greensboro, NCthis page | $4,300 – $8,550 | $6,400 | |
| Burlington, NC20 miles | $4,300 – $8,600 | $6,450 | level |
| Winston, NC30 miles | $4,300 – $8,600 | $6,450 | +1% |
| Durham, NC40 miles | $4,350 – $8,750 | $6,550 | +2% |
| Raleigh, NC75 miles | $4,350 – $8,700 | $6,500 | +2% |
| Charlotte, NC80 miles | $4,350 – $8,700 | $6,500 | +2% |
| North Carolina (statewide) | $4,300 – $8,650 | $6,500 | +1% |
| United States | $4,550 – $9,150 | $6,850 | +7% |
Out of the 300 metros we cover, Greensboro ranks #230 for the cost of this job (#1 is the most expensive). Statewide, Greensboro is 1% below the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $4,350 – $8,700 | $6,500 | +2% |
| Raleigh, NC | 743,120 jobs | $4,350 – $8,700 | $6,500 | +2% |
| Durham, NC | 344,020 jobs | $4,350 – $8,750 | $6,550 | +2% |
| Winston, NC | 271,980 jobs | $4,300 – $8,600 | $6,450 | +1% |
| Wilmington, NC | 191,280 jobs | $4,350 – $8,700 | $6,550 | +2% |
| Asheville, NC | 180,620 jobs | $4,350 – $8,750 | $6,550 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Greensboro against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dayton, OH | 372,660 jobs | $4,350 – $8,800 | $6,550 | +2% |
| Little Rock, AR | 358,210 jobs | $4,150 – $8,250 | $6,200 | −4% |
| Allentown, PA | 377,180 jobs | $4,550 – $9,200 | $6,900 | +7% |
| Worcester, MA | 349,880 jobs | $4,600 – $9,500 | $7,050 | +10% |
Vinyl fence: what moves the price in Greensboro
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,550 to $7,250 for Greensboro, NC is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Greensboro, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Greensboro: your questions
+How much does it cost to install a vinyl fence in Greensboro?
For 150 linear ft, expect $4,300 to $8,550 in the Greensboro area. A standard-spec job lands at $5,550 to $7,250. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Greensboro?
About $28.50 to $56 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Greensboro or Burlington?
Burlington is 20 miles away. The midpoint for 150 linear ft there is $6,450, which is 0% more than Greensboro ($6,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greensboro?
About 20% at the midpoint, or $1,250 out of $6,400. Materials are 79% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Greensboro?
$5,700 to $11,300. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Greensboro?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Greensboro area (our national range of $40 to $150 scaled by the local price level).
+Is Greensboro expensive for vinyl fence compared with the rest of North Carolina?
Greensboro is 1% below the North Carolina statewide estimate ($6,500 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do carpenters earn in Greensboro?
The BLS median is $24.00 an hour in the Greensboro area, compared with $29.12 nationally. The 25th to 75th percentile range is $19.49 to $28.58.
+What do basic and premium vinyl fence work cost in Greensboro?
For 150 linear ft, basic work runs $4,300 to $6,000 and premium work $6,850 to $8,550. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+Is there a bad season to install a vinyl fence in Greensboro?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Greensboro?
$140 to $700, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Greensboro
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.