Wood fence cost in Greensboro, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $2,750 – $7,000
- Per linear ft
- $18 – $45.50
- before permit
- Versus US midpoint
- −9%
- US $5,350
- Rank of 300 metros
- #235
- 1 = most expensive
Greensboro homeowners pay roughly $2,750 to $7,000 to install a wood fence at 150 linear ft, or $18 to $45.50 per linear ft (permit not included). Against the US midpoint, Greensboro is 9% lower. Carpenters earn a median of $24.00 an hour in the Greensboro area, 18% below the US median of $29.12.
Estimate your wood fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Greensboro, NC, standard level
$4,000 to $5,700
About $26.50 to $37.50 per linear ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,300 | $3,500 |
| Labor | $1,650 | $2,150 |
| Permits and fees | $70 | $110 |
| Total | $4,000 | $5,700 |
Cost breakdown for 150 linear ft in Greensboro, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,450 | $2,900 | $4,350 | 60% |
| Labor | $1,250 | $1,900 | $2,500 | 39% |
| Permits and fees | $35 | $90 | $140 | 2% |
| Total | $2,750 | $4,850 | $7,000 | 100% |
Where the Greensboro price comes from
We price the labor side from BLS wage data for 2 trades: carpenters at 60%, construction laborers at 40%. Weighted together, Greensboro wages are 0.83 times the national level. Labor makes up about 39% of the midpoint estimate (42% at national prices).
On the materials line, the BEA goods price index for the Greensboro metro is 96.6 (US = 100). The midpoint materials bill for 150 linear ft comes to $2,900, compared with $3,000 at national prices. Permit and inspection fees are scaled by the broader index (92.9) and land at $35 to $140.
When to schedule wood fence in Greensboro
We use NOAA's 1991-2020 climate normals for Greensboro Wtp (in the city). These are 30-year monthly averages, not forecasts.
Weather is not a serious constraint for exterior installation in Greensboro: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Greensboro gets about 46 inches of precipitation in a normal year. The wettest months are June, July and August (5.8 inches in July). The station averages about 42 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 50 | 30 | 3.2 | Workable |
| Feb | 54 | 33 | 2.5 | Workable |
| Mar | 62 | 39 | 3.7 | Workable |
| Apr | 71 | 48 | 3.6 | Workable |
| May | 79 | 58 | 3.3 | Workable |
| Jun | 85 | 65 | 5.1 | Workable |
| Jul | 89 | 71 | 5.8 | Workable |
| Aug | 87 | 68 | 4.5 | Workable |
| Sep | 81 | 61 | 4.4 | Workable |
| Oct | 71 | 49 | 3.2 | Workable |
| Nov | 61 | 39 | 3.0 | Workable |
| Dec | 53 | 33 | 3.4 | Workable |
Related projects, priced for Greensboro
Because every project leans on different trades, Greensboro's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −6% and chain-link fence −11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,550 | −6% |
| Chain-link fence | 150 linear ft | $1,400 – $5,450 | −11% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Wood deck | 300 sq ft | $6,850 – $13,700 | −9% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Greensboro is 0.83 times the national level.
For carpenters (47-2031, weighted 60%) the local median is $24.00 an hour, which is 18% below the national $29.12. The middle half of them earn between $19.49 and $28.58 an hour. BLS counts 760 of them working in the area, 20.8 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 40% of the weighting: a median of $19.28 an hour, 15% below the US median of $22.66. The middle half of them earn between $17.65 and $23.22 an hour. About 2,190 work in the metro. That is 59.9 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.58 an hour) instead of the median, the labor line grows by about $210. At the 25th percentile ($19.49) it shrinks by about $210. The total moves by 4.4% or 4.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 365,410 jobs in the Greensboro-High Point area. That makes it the 71st largest of the 300 metros we cover, with 0.23% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $19.49 | $24.00 | $28.58 | $29.12 | 0.82 | metro |
| Construction laborers (47-2061) | 40% | $17.65 | $19.28 | $23.22 | $22.66 | 0.85 | metro |
| Blended | 100% | 0.83 | |||||
Wood fence: what moves the price in Greensboro
Wood species
A 6-ft privacy fence is $25-$50 per linear foot installed; an 8-ft one goes up to $75. Tropical hardwood privacy fences run $35-$55 (HomeGuide).
Style
Split-rail and picket styles are cheaper to build than privacy fence, which uses more boards and takes more labor.
Height and permits
Fences over about 6 ft often need a permit and a setback check. Permits run $40-$150.
Cost by quality level and size in Greensboro
Three bands are cut from the same cited range and localized for Greensboro wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,750 to $4,450
Pine pickets or split rail, 4 ft
Standard
$4,000 to $5,700
6-ft cedar or treated privacy fence
Premium
$5,300 to $7,000
Premium hardwood or 8-ft privacy fence
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $1,850 – $3,000 | $2,700 – $3,850 | $3,550 – $4,700 |
| 150 ft (150 linear ft) | $2,750 – $4,450 | $4,000 – $5,700 | $5,300 – $7,000 |
| 200 ft (200 linear ft) | $3,650 – $5,900 | $5,350 – $7,600 | $7,000 – $9,300 |
| full lot (300 linear ft) | $5,450 – $8,800 | $7,950 – $11,300 | $10,500 – $13,800 |
Optional extras in Greensboro
Extras are quoted nationally and then scaled to Greensboro by the average of the local wage index (0.83) and goods index (0.97), a factor of 0.90. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $720 |
Is Greensboro cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $4,850 to $5,050 across Greensboro and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greensboro, NCthis page | $2,750 – $7,000 | $4,850 | |
| Burlington, NC20 miles | $2,750 – $7,050 | $4,900 | +1% |
| Winston, NC30 miles | $2,750 – $7,050 | $4,900 | +1% |
| Durham, NC40 miles | $2,850 – $7,200 | $5,050 | +3% |
| Raleigh, NC75 miles | $2,800 – $7,150 | $5,000 | +3% |
| Charlotte, NC80 miles | $2,850 – $7,150 | $5,000 | +3% |
| North Carolina (statewide) | $2,800 – $7,100 | $4,950 | +1% |
| United States | $3,050 – $7,650 | $5,350 | +10% |
Across 300 US metros, Greensboro comes in at #235 from the top. The priciest is Honolulu, HI at $7,050; the cheapest is Brownsville, TX at $4,350 (midpoints, 150 linear ft). Statewide, Greensboro is 1% below the North Carolina figure.
Other North Carolina metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $2,850 – $7,150 | $5,000 | +3% |
| Raleigh, NC | 743,120 jobs | $2,800 – $7,150 | $5,000 | +3% |
| Durham, NC | 344,020 jobs | $2,850 – $7,200 | $5,050 | +3% |
| Winston, NC | 271,980 jobs | $2,750 – $7,050 | $4,900 | +1% |
| Wilmington, NC | 191,280 jobs | $2,850 – $7,200 | $5,000 | +3% |
| Asheville, NC | 180,620 jobs | $2,850 – $7,250 | $5,050 | +4% |
Cities with a workforce like Greensboro's
Big cities and small ones price differently, so here is Greensboro against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dayton, OH | 372,660 jobs | $3,000 – $7,450 | $5,200 | +7% |
| Little Rock, AR | 358,210 jobs | $2,650 – $6,700 | $4,650 | −4% |
| Allentown, PA | 377,180 jobs | $3,050 – $7,700 | $5,400 | +11% |
| Worcester, MA | 349,880 jobs | $3,350 – $8,250 | $5,800 | +19% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,000 to $5,700 for Greensboro, NC is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Greensboro, NC: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Wood fence in Greensboro: your questions
+How much does it cost to install a wood fence in Greensboro?
For 150 linear ft, expect $2,750 to $7,000 in the Greensboro area. A standard-spec job lands at $4,000 to $5,700. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for wood fence in Greensboro?
About $18 to $45.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $20 to $50.
+Is wood fence cheaper in Greensboro or Burlington?
Burlington is 20 miles away. The midpoint for 150 linear ft there is $4,900, which is 1% more than Greensboro ($4,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greensboro?
About 39% at the midpoint, or $1,900 out of $4,850. Materials are 60% and permits 2%. Nationally, labor is 42%.
+What would 200 ft (200 linear ft) cost in Greensboro?
$3,650 to $9,300. Pick a different size in the estimator above to get your own number.
+Does wood fence need a permit in Greensboro?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Greensboro area (our national range of $40 to $150 scaled by the local price level).
+Is Greensboro expensive for wood fence compared with the rest of North Carolina?
Greensboro is 1% below the North Carolina statewide estimate ($4,950 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do carpenters earn in Greensboro?
The BLS median is $24.00 an hour in the Greensboro area, compared with $29.12 nationally. The 25th to 75th percentile range is $19.49 to $28.58.
+What do basic and premium wood fence work cost in Greensboro?
For 150 linear ft, basic work runs $2,750 to $4,450 and premium work $5,300 to $7,000. Basic means: pine pickets or split rail, 4 ft. Premium means: premium hardwood or 8-ft privacy fence.
+Is there a bad season to install a wood fence in Greensboro?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Greensboro?
$140 to $720, from a national range scaled by the local wage and goods indexes.
Wood fence near Greensboro
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Wood Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020