Aluminum fence cost in Asheville, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,600 – $10,800
- Per linear ft
- $23.50 – $71
- before permit
- Versus US midpoint
- −5%
- US $7,600
- Rank of 300 metros
- #178
- 1 = most expensive
Asheville homeowners pay roughly $3,600 to $10,800 to install an aluminum fence at 150 linear ft, or $23.50 to $71 per linear ft (permit not included). Against the US midpoint, Asheville is 5% lower. Carpenters earn a median of $24.66 an hour in the Asheville area, 15% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Asheville, NC, standard level
$5,750 to $8,650
About $38 to $57 per linear ft before permits. Labor is about 33% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $2,000 | $2,800 |
| Permits and fees | $70 | $110 |
| Total | $5,750 | $8,650 |
Cost breakdown for 150 linear ft in Asheville, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,250 | 66% |
| Labor | $1,350 | $2,400 | $3,400 | 33% |
| Permits and fees | $40 | $90 | $140 | 1% |
| Total | $3,600 | $7,200 | $10,800 | 100% |
Why Asheville prices look the way they do
Labor is 33% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Asheville the blended ratio comes out at 0.91.
On the materials line, the BEA goods price index for the Asheville metro is 96.6 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,700, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (96.5) and land at $40 to $140.
Planning more than one job in Asheville?
Because every project leans on different trades, Asheville's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −4% and inground pool −7%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,350 – $8,750 | −4% |
| Wood fence | 150 linear ft | $2,850 – $7,250 | −6% |
| Chain-link fence | 150 linear ft | $1,450 – $5,850 | −5% |
| Inground pool | 450 sq ft | $33,500 – $104,500 | −7% |
Specs and site conditions that change a Asheville bid
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Pick a size, pick a tier: aluminum fence pricing in Asheville
Three bands are cut from the same cited range and localized for Asheville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,600 to $6,450
Standard picket or ornamental, 4 ft
Standard
$5,750 to $8,650
Ornamental pool-code fence, 4-5 ft
Premium
$7,900 to $10,800
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,400 – $4,350 | $3,850 – $5,800 | $5,300 – $7,250 |
| 150 ft (150 linear ft) | $3,600 – $6,450 | $5,750 – $8,650 | $7,900 – $10,800 |
| 200 ft (200 linear ft) | $4,750 – $8,600 | $7,650 – $11,500 | $10,500 – $14,400 |
Add-ons priced for Asheville
Extras are quoted nationally and then scaled to Asheville by the average of the local wage index (0.91) and goods index (0.97), a factor of 0.94. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $190 – $840 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Asheville is 0.91 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $24.66 an hour, which is 15% below the national $29.12. The middle half of them earn between $20.76 and $29.67 an hour. BLS counts 750 of them working in the area, 41.5 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 40% of the weighting: a median of $22.85 an hour, in line with the US median of $22.66. The middle half of them earn between $18.46 and $23.75 an hour. About 1,340 work in the metro. That is 74.2 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For sheet metal workers (47-2211, weighted 20%) the local median is $24.90 an hour, which is 16% below the national $29.71. The middle half of them earn between $22.16 and $30.31 an hour. BLS counts 110 of them working in the area, 6.1 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($29.67 an hour) instead of the median, the labor line grows by about $180. At the 25th percentile ($20.76) it shrinks by about $140. The total moves by 2.5% or 2.0%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 180,620 jobs in the Asheville area. That makes it the 127th largest of the 300 metros we cover, with 0.12% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $20.76 | $24.66 | $29.67 | $29.12 | 0.85 | metro |
| Construction laborers (47-2061) | 40% | $18.46 | $22.85 | $23.75 | $22.66 | 1.01 | metro |
| Sheet metal workers (47-2211) | 20% | $22.16 | $24.90 | $30.31 | $29.71 | 0.84 | metro |
| Blended | 100% | 0.91 | |||||
Is Asheville cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Asheville. Hickory is the lowest at about $7,000 (midpoint, 150 linear ft), 65 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Asheville, NCthis page | $3,600 – $10,800 | $7,200 | |
| Johnson City, TN45 miles | $3,500 – $10,600 | $7,050 | −2% |
| Hickory, NC65 miles | $3,500 – $10,600 | $7,000 | −2% |
| Greenville, SC65 miles | $3,500 – $10,600 | $7,050 | −2% |
| Spartanburg, SC70 miles | $3,550 – $10,700 | $7,100 | −1% |
| Kingsport, TN70 miles | $3,550 – $10,700 | $7,100 | −1% |
| North Carolina (statewide) | $3,500 – $10,600 | $7,100 | −2% |
| United States | $3,800 – $11,400 | $7,600 | +6% |
Across 300 US metros, Asheville comes in at #178 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Asheville is 2% above the North Carolina figure.
Other North Carolina metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $3,550 – $10,700 | $7,150 | −1% |
| Raleigh, NC | 743,120 jobs | $3,550 – $10,700 | $7,150 | −1% |
| Greensboro, NC | 365,410 jobs | $3,500 – $10,600 | $7,050 | −2% |
| Durham, NC | 344,020 jobs | $3,550 – $10,700 | $7,150 | −1% |
| Winston, NC | 271,980 jobs | $3,450 – $10,500 | $7,000 | −3% |
| Wilmington, NC | 191,280 jobs | $3,550 – $10,700 | $7,100 | −1% |
Cities with a workforce like Asheville's
Big cities and small ones price differently, so here is Asheville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lincoln, NE | 182,620 jobs | $3,500 – $10,600 | $7,050 | −2% |
| Davenport, IA | 180,450 jobs | $3,800 – $11,300 | $7,550 | +5% |
| York, PA | 183,590 jobs | $3,850 – $11,500 | $7,650 | +7% |
| Lafayette, LA | 179,570 jobs | $3,350 – $10,200 | $6,800 | −6% |
When to schedule aluminum fence in Asheville
We use NOAA's 1991-2020 climate normals for Asheville (5 miles from the city center). These are 30-year monthly averages, not forecasts.
Weather is not a serious constraint for exterior installation in Asheville: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Asheville gets about 41 inches of precipitation in a normal year, including roughly 12 inches of snow. The wettest months are April, July and September (4.1 inches in July). The station averages about 16 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 48 | 29 | 3.3 | Workable |
| Feb | 52 | 32 | 2.9 | Workable |
| Mar | 59 | 38 | 3.5 | Workable |
| Apr | 69 | 46 | 3.7 | Workable |
| May | 76 | 54 | 3.5 | Workable |
| Jun | 83 | 61 | 3.4 | Workable |
| Jul | 86 | 65 | 4.1 | Workable |
| Aug | 85 | 64 | 3.6 | Workable |
| Sep | 79 | 58 | 3.7 | Workable |
| Oct | 69 | 47 | 2.6 | Workable |
| Nov | 59 | 37 | 3.0 | Workable |
| Dec | 51 | 32 | 3.3 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,750 to $8,650 for Asheville, NC is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Asheville, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Asheville: your questions
+How much does it cost to install an aluminum fence in Asheville?
For 150 linear ft, expect $3,600 to $10,800 in the Asheville area. A standard-spec job lands at $5,750 to $8,650. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Asheville?
About $23.50 to $71 per linear ft for materials and labor, plus $40 to $140 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Asheville or Johnson City?
Johnson City is 45 miles away. The midpoint for 150 linear ft there is $7,050, which is 2% less than Asheville ($7,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Asheville?
About 33% at the midpoint, or $2,400 out of $7,200. Materials are 66% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Asheville?
$3,600 to $10,800. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Asheville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $140 for fees in the Asheville area (our national range of $40 to $150 scaled by the local price level).
+Is Asheville expensive for aluminum fence compared with the rest of North Carolina?
Asheville is 2% above the North Carolina statewide estimate ($7,100 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do carpenters earn in Asheville?
The BLS median is $24.66 an hour in the Asheville area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.76 to $29.67.
+What do basic and premium aluminum fence work cost in Asheville?
For 150 linear ft, basic work runs $3,600 to $6,450 and premium work $7,900 to $10,800. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+Is there a bad season to install an aluminum fence in Asheville?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Asheville?
$190 to $840, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Asheville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.