Aluminum fence cost in Raleigh, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,550 – $10,700
- Per linear ft
- $23.50 – $70.50
- before permit
- Versus US midpoint
- −6%
- US $7,600
- Rank of 300 metros
- #187
- 1 = most expensive
Local price for an aluminum fence in the Raleigh area: $3,550 to $10,700 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Carpenters earn a median of $24.43 an hour in the Raleigh area, 16% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Raleigh, NC, standard level
$5,700 to $8,550
About $37.50 to $56.50 per linear ft before permits. Labor is about 33% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $1,950 | $2,750 |
| Permits and fees | $70 | $110 |
| Total | $5,700 | $8,550 |
Cost breakdown for 150 linear ft in Raleigh, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,250 | 66% |
| Labor | $1,350 | $2,350 | $3,350 | 33% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $3,550 | $7,150 | $10,700 | 100% |
What is behind the Raleigh number
We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Raleigh wages are 0.89 times the national level. Labor makes up about 33% of the midpoint estimate (35% at national prices).
Materials are scaled with BEA's regional price parity for goods. Raleigh is at 96.6 against 100 for the US, so a materials line of $4,900 nationally becomes $4,700 here (midpoint, 150 linear ft). Permits follow the all-items index of 98.2: $40 to $150.
Specs and site conditions that change a Raleigh bid
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Related projects, priced for Raleigh
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Raleigh wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−5%) and inground pool lowest (−7%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,350 – $8,700 | −5% |
| Wood fence | 150 linear ft | $2,800 – $7,150 | −7% |
| Chain-link fence | 150 linear ft | $1,450 – $5,750 | −6% |
| Inground pool | 450 sq ft | $33,600 – $105,000 | −7% |
The best months for aluminum fence in Raleigh
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Raleigh Durham Intl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Raleigh are August through June: 11 of 12. Outside them, July has an average daytime high of 90°F or more.
Raleigh gets about 46 inches of precipitation in a normal year, including roughly 5 inches of snow. The wettest months are July, August and September (5.2 inches in September). Inside the workable window, February and November are the driest, at 2.8 and 3.3 inches. The station averages about 52 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 52 | 32 | 3.4 | Workable |
| Feb | 56 | 34 | 2.8 | Workable |
| Mar | 63 | 40 | 4.1 | Workable |
| Apr | 73 | 49 | 3.5 | Workable |
| May | 80 | 58 | 3.4 | Workable |
| Jun | 87 | 66 | 3.9 | Workable |
| Jul | 91 | 70 | 5.0 | Hot |
| Aug | 89 | 69 | 4.7 | Workable |
| Sep | 83 | 63 | 5.2 | Workable |
| Oct | 73 | 50 | 3.4 | Workable |
| Nov | 63 | 40 | 3.3 | Workable |
| Dec | 55 | 34 | 3.4 | Workable |
Optional extras in Raleigh
Add-ons start from national price ranges and are scaled by 0.93 for Raleigh, which is the average of the area's wage index (0.89) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $190 – $830 |
Is Raleigh cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. Raleigh is the priciest of the group. Fayetteville is the cheapest at $6,950.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Raleigh, NCthis page | $3,550 – $10,700 | $7,150 | |
| Durham, NC40 miles | $3,550 – $10,700 | $7,150 | level |
| Burlington, NC55 miles | $3,450 – $10,500 | $7,000 | −2% |
| Fayetteville, NC60 miles | $3,450 – $10,500 | $6,950 | −2% |
| Greenville, NC60 miles | $3,450 – $10,500 | $7,000 | −2% |
| Greensboro, NC75 miles | $3,500 – $10,600 | $7,050 | −1% |
| North Carolina (statewide) | $3,500 – $10,600 | $7,100 | −1% |
| United States | $3,800 – $11,400 | $7,600 | +7% |
Out of the 300 metros we cover, Raleigh ranks #187 for the cost of this job (#1 is the most expensive). Statewide, Raleigh is 1% above the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $3,550 – $10,700 | $7,150 | level |
| Greensboro, NC | 365,410 jobs | $3,500 – $10,600 | $7,050 | −1% |
| Durham, NC | 344,020 jobs | $3,550 – $10,700 | $7,150 | level |
| Winston, NC | 271,980 jobs | $3,450 – $10,500 | $7,000 | −2% |
| Wilmington, NC | 191,280 jobs | $3,550 – $10,700 | $7,100 | level |
| Asheville, NC | 180,620 jobs | $3,600 – $10,800 | $7,200 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Raleigh against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Virginia Beach, VA | 763,060 jobs | $3,500 – $10,700 | $7,100 | level |
| Providence, RI | 714,120 jobs | $3,900 – $11,600 | $7,800 | +9% |
| Jacksonville, FL | 765,930 jobs | $3,500 – $10,600 | $7,050 | −1% |
| Louisville, KY | 685,190 jobs | $3,650 – $11,000 | $7,350 | +3% |
Who does the work: Raleigh trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Raleigh the blend is 0.89.
Carpenters (47-2031), 40% of the weighting: a median of $24.43 an hour, 16% below the US median of $29.12. The middle half of them earn between $21.31 and $29.01 an hour. About 2,680 work in the metro. That is 36.1 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $21.95 an hour, which is 3% below the national $22.66. The middle half of them earn between $18.31 and $23.77 an hour. BLS counts 6,360 of them working in the area, 85.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Sheet metal workers (47-2211), 20% of the weighting: a median of $24.31 an hour, 18% below the US median of $29.71. The middle half of them earn between $22.56 and $29.02 an hour. About 470 work in the metro. That is 6.3 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $170 to the midpoint estimate; the 25th percentile takes off about $110. That is a swing of roughly 1.6% to 2.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Raleigh-Cary has 743,120 jobs in total (BLS, May 2025), ranking 41st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $21.31 | $24.43 | $29.01 | $29.12 | 0.84 | metro |
| Construction laborers (47-2061) | 40% | $18.31 | $21.95 | $23.77 | $22.66 | 0.97 | metro |
| Sheet metal workers (47-2211) | 20% | $22.56 | $24.31 | $29.02 | $29.71 | 0.82 | metro |
| Blended | 100% | 0.89 | |||||
Raleigh: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Raleigh. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$3,550 to $6,400
Standard picket or ornamental, 4 ft
Standard
$5,700 to $8,550
Ornamental pool-code fence, 4-5 ft
Premium
$7,850 to $10,700
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,400 – $4,300 | $3,800 – $5,750 | $5,250 – $7,200 |
| 150 ft (150 linear ft) | $3,550 – $6,400 | $5,700 – $8,550 | $7,850 – $10,700 |
| 200 ft (200 linear ft) | $4,700 – $8,500 | $7,550 – $11,400 | $10,400 – $14,200 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,700 to $8,550 for Raleigh, NC is attached.
A detailed PDF report of this estimate, $9
The report lays out the aluminum fence numbers for Raleigh, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Raleigh: your questions
+How much does it cost to install an aluminum fence in Raleigh?
For 150 linear ft, expect $3,550 to $10,700 in the Raleigh area. A standard-spec job lands at $5,700 to $8,550. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Raleigh?
About $23.50 to $70.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Raleigh or Durham?
Durham is 40 miles away. The midpoint for 150 linear ft there is $7,150, which is 0% less than Raleigh ($7,150). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Raleigh?
About 33% at the midpoint, or $2,350 out of $7,150. Materials are 66% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Raleigh?
$3,550 to $10,700. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Raleigh?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Raleigh area (our national range of $40 to $150 scaled by the local price level).
+Is Raleigh expensive for aluminum fence compared with the rest of North Carolina?
Raleigh is 1% above the North Carolina statewide estimate ($7,100 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do carpenters earn in Raleigh?
The BLS median is $24.43 an hour in the Raleigh area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.31 to $29.01.
+What do basic and premium aluminum fence work cost in Raleigh?
For 150 linear ft, basic work runs $3,550 to $6,400 and premium work $7,850 to $10,700. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Raleigh?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Raleigh?
$190 to $830, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Raleigh
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.