Vinyl fence cost in Nebraska
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (150 linear ft)
- $4,250 – $8,550
- Per linear ft
- $28 – $56
- before permit
- Versus US midpoint
- −6%
- US $6,850
- Metros covered
- 2
Across Nebraska, a vinyl fence costs about $4,250 to $8,550 for 150 linear ft. Statewide, that midpoint is 6% below the US figure of $6,850. Carpenters earn a median $24.19 an hour in Nebraska (US: $29.12).
Inside Nebraska, the metros we cover range from $6,400 (Lincoln) to $6,450 (Omaha) at the midpoint.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Nebraska (statewide), standard level
$5,550 to $7,250
About $36.50 to $47.50 per linear ft before permits. Labor is about 21% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,400 | $5,500 |
| Labor | $1,100 | $1,650 |
| Permits and fees | $65 | $110 |
| Total | $5,550 | $7,250 |
Cost breakdown for 150 linear ft in Nebraska
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,550 | $4,950 | $6,350 | 77% |
| Labor | $690 | $1,400 | $2,050 | 21% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $4,250 | $6,400 | $8,550 | 100% |
What carpenters and the other trades earn in Nebraska
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 2 trades drive the labor line for this job, and the weighted ratio against the national wage level is 0.92 for Nebraska.
For carpenters (47-2031, weighted 50%) the local median is $24.19 an hour, which is 17% below the national $29.12. The middle half of them earn between $21.77 and $30.09 an hour. BLS counts 5,710 of them working in the state, 55.7 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 50% of the weighting: a median of $22.72 an hour, in line with the US median of $22.66. The middle half of them earn between $19.38 and $26.71 an hour. About 8,530 work in the state. That is 83.3 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
A crew paid at the 75th percentile for carpenters ($30.09 an hour) would add about $150 to the statewide midpoint; one at the 25th percentile ($21.77) would take off about $60. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 1,024,370 jobs across Nebraska (May 2025), which is 0.7% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.77 | $24.19 | $30.09 | $29.12 | 0.83 | state |
| Construction laborers (47-2061) | 50% | $19.38 | $22.72 | $26.71 | $22.66 | 1.00 | state |
| Blended | 100% | 0.92 | |||||
Nebraska against its neighbors
Nebraska ranks 46 of 51 (the 50 states plus DC) for vinyl fence, where 1 is the most expensive. The costliest is Hawaii at $8,250 and the cheapest Arkansas at $6,200, both for 150 linear ft at the midpoint. Nebraska sits at $6,400. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Iowa | 190 miles away | $4,300 – $8,700 | $6,500 | +1% |
| South Dakota | 220 miles away | $4,300 – $8,550 | $6,400 | level |
| Kansas | 220 miles away | $4,250 – $8,600 | $6,450 | +1% |
| Missouri | 270 miles away | $4,500 – $9,100 | $6,800 | +6% |
| Minnesota | 320 miles away | $4,700 – $9,600 | $7,150 | +11% |
Vinyl fence cost by metro in Nebraska
1 of the 2 metros sit above the statewide midpoint of $6,400, and the top-to-bottom gap is 1%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (150 linear ft) | Midpoint | vs. state |
|---|---|---|---|
| Omaha, NE | $4,300 – $8,600 | $6,450 | +1% |
| Lincoln, NE | $4,250 – $8,550 | $6,400 | level |
Nebraska seasons and vinyl fence
Season matters for vinyl fence. For each Nebraska metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for exterior installation.
Every Nebraska metro on the list has 9 comfortable months, though rainfall ranges from 29 inches a year in Lincoln to 32 in Omaha.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Omaha | 15 | 88 | 32 | 9: March through November |
| Lincoln | 14 | 89 | 29 | 9: March through November |
Vinyl fence: what moves the price in Nebraska
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Extras that change the Nebraska total
Extras are quoted nationally and then scaled to Nebraska by the average of the local wage index (0.92) and goods index (0.94), a factor of 0.93. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $720 |
| Remove old fence | $1,400 – $2,800 |
Related projects, priced for Nebraska
The table prices neighboring jobs at their usual sizes using statewide Nebraska wages and prices. Against national midpoints, aluminum fence comes out highest (−6%) and wood fence lowest (−8%), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,800 – $7,050 | −8% |
| Chain-link fence | 150 linear ft | $1,450 – $5,750 | −6% |
| Aluminum fence | 150 linear ft | $3,550 – $10,700 | −6% |
| Concrete slab | 400 sq ft | $2,250 – $4,850 | −7% |
Quality levels and sizes in Nebraska
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Nebraska wages and prices. The grid prices the same bands at 4 common sizes.
Basic
$4,250 to $5,950
4-ft picket or ranch rail
Standard
$5,550 to $7,250
6-ft privacy fence, standard white
Premium
$6,850 to $8,550
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,850 – $4,000 | $3,700 – $4,900 | $4,600 – $5,750 |
| 150 ft (150 linear ft) | $4,250 – $5,950 | $5,550 – $7,250 | $6,850 – $8,550 |
| 200 ft (200 linear ft) | $5,650 – $7,950 | $7,350 – $9,650 | $9,100 – $11,400 |
| full lot (300 linear ft) | $8,450 – $11,900 | $11,000 – $14,400 | $13,600 – $17,000 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,550 to $7,250 for Nebraska is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Nebraska: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Nebraska: your questions
+How much does it cost to install a vinyl fence in Nebraska?
$4,250 to $8,550 for 150 linear ft, using statewide wages and prices. Metro areas inside Nebraska can sit above or below that.
+Which city in Nebraska is cheapest for vinyl fence?
Lincoln at about $6,400 (midpoint, 150 linear ft). The priciest is Omaha at $6,450.
+Is vinyl fence cheaper in Nebraska than the US average?
It is 6% cheaper: $6,400 against $6,850 for 150 linear ft at the midpoint.
+What share of the price is labor in Nebraska?
About 21% ($1,400). Materials are 77%. Statewide labor for this job is weighted 0.92x the national wage level.
+What do carpenters earn in Nebraska?
The BLS statewide median is $24.19 an hour, against $29.12 for the US. The 25th to 75th percentile range is $21.77 to $30.09.
+Where does Nebraska rank for vinyl fence costs?
46th most expensive of 51 (the 50 states plus DC) at the midpoint, $6,400 for 150 linear ft. Rank 1 is the costliest.
+What do basic and premium vinyl fence work cost in Nebraska?
For 150 linear ft, basic work runs $4,250 to $5,950 and premium work $6,850 to $8,550. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+Does the season matter for vinyl fence in Nebraska?
Yes where winters or summers are hard. Of the Nebraska metros we cover, Omaha has the most comfortable months (9 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
+What does "add one gate" add in Nebraska?
$140 to $720, from a national range scaled by the statewide wage and goods indexes.
Vinyl fence by city in Nebraska
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.