Vinyl fence cost in Des Moines, IA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,350 – $8,800
- Per linear ft
- $28.50 – $57.50
- before permit
- Versus US midpoint
- −4%
- US $6,850
- Rank of 300 metros
- #150
- 1 = most expensive
If you want to install a vinyl fence in Des Moines, plan on $4,350 to $8,800 for 150 linear ft, all in. Per linear ft, that is $28.50 to $57.50 for materials and labor, with the permit on top. The local midpoint runs 4% lower than the national one. Building materials run about 6% below the US average here (BEA goods price index 93.7).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Des Moines, IA, standard level
$5,650 to $7,450
About $37.50 to $49 per linear ft before permits. Labor is about 24% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $1,250 | $1,850 |
| Permits and fees | $65 | $110 |
| Total | $5,650 | $7,450 |
Cost breakdown for 150 linear ft in Des Moines, IA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,500 | $4,900 | $6,350 | 75% |
| Labor | $780 | $1,550 | $2,350 | 24% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $4,350 | $6,550 | $8,800 | 100% |
What is behind the Des Moines number
The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $29.50 an hour. Add the other trades involved and the blended wage index for Des Moines is 1.04 (US = 1.00), which puts labor at 24% of the total.
On the materials line, the BEA goods price index for the Des Moines metro is 93.7 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,900, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (91.7) and land at $35 to $140.
Extras that change the Des Moines total
Extras are quoted nationally and then scaled to Des Moines by the average of the local wage index (1.04) and goods index (0.94), a factor of 0.99. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $150 – $770 |
| Remove old fence | $1,500 – $2,950 |
Des Moines labor market for vinyl fence
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Des Moines is 1.04 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $29.50 an hour, which is in line with the national $29.12. The middle half of them earn between $24.03 and $35.68 an hour. BLS counts 1,810 of them working in the area, 44.8 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 50% of the weighting: a median of $24.03 an hour, 6% above the US median of $22.66. The middle half of them earn between $22.67 and $28.91 an hour. About 3,510 work in the metro. That is 86.9 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($35.68 an hour) instead of the median, the labor line grows by about $160. At the 25th percentile ($24.03) it shrinks by about $140. The total moves by 2.4% or 2.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 404,130 jobs in the Des Moines-West Des Moines area. That makes it the 64th largest of the 300 metros we cover, with 0.26% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $24.03 | $29.50 | $35.68 | $29.12 | 1.01 | metro |
| Construction laborers (47-2061) | 50% | $22.67 | $24.03 | $28.91 | $22.66 | 1.06 | metro |
| Blended | 100% | 1.04 | |||||
Pick a size, pick a tier: vinyl fence pricing in Des Moines
Three bands are cut from the same cited range and localized for Des Moines wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,350 to $6,100
4-ft picket or ranch rail
Standard
$5,650 to $7,450
6-ft privacy fence, standard white
Premium
$7,000 to $8,800
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,900 – $4,100 | $3,800 – $5,000 | $4,700 – $5,900 |
| 150 ft (150 linear ft) | $4,350 – $6,100 | $5,650 – $7,450 | $7,000 – $8,800 |
| 200 ft (200 linear ft) | $5,750 – $8,150 | $7,550 – $9,900 | $9,300 – $11,700 |
| full lot (300 linear ft) | $8,600 – $12,200 | $11,300 – $14,800 | $13,900 – $17,500 |
Climate in Des Moines: timing your vinyl fence job
We use NOAA's 1991-2020 climate normals for Des Moines Intl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Des Moines (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Des Moines gets about 37 inches of precipitation in a normal year, including roughly 37 inches of snow. The wettest months are May, June and August (5.3 inches in June). Inside the workable window, March and November are the driest, at 2.2 and 1.9 inches. The station averages about 22 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 31 | 14 | 1.1 | Cold |
| Feb | 36 | 18 | 1.3 | Cold |
| Mar | 49 | 30 | 2.2 | Workable |
| Apr | 62 | 41 | 4.0 | Workable |
| May | 72 | 52 | 5.2 | Workable |
| Jun | 82 | 62 | 5.3 | Workable |
| Jul | 86 | 66 | 3.8 | Workable |
| Aug | 84 | 64 | 4.2 | Workable |
| Sep | 77 | 55 | 3.2 | Workable |
| Oct | 63 | 43 | 2.8 | Workable |
| Nov | 48 | 30 | 1.9 | Workable |
| Dec | 36 | 20 | 1.6 | Cold |
Vinyl fence: what moves the price in Des Moines
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Related projects, priced for Des Moines
Because every project leans on different trades, Des Moines's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs level and aluminum fence −3%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,000 – $7,450 | −2% |
| Chain-link fence | 150 linear ft | $1,500 – $6,200 | level |
| Aluminum fence | 150 linear ft | $3,700 – $11,100 | −3% |
| Concrete slab | 400 sq ft | $2,450 – $5,100 | −2% |
Is Des Moines cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Des Moines. Iowa City is the lowest at about $6,400 (midpoint, 150 linear ft), 110 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Des Moines, IAthis page | $4,350 – $8,800 | $6,550 | |
| Waterloo, IA95 miles | $4,300 – $8,700 | $6,500 | −1% |
| Iowa City, IA110 miles | $4,250 – $8,550 | $6,400 | −3% |
| Cedar Rapids, IA115 miles | $4,300 – $8,700 | $6,500 | −1% |
| Omaha, NE120 miles | $4,300 – $8,600 | $6,450 | −2% |
| Sioux City, IA145 miles | $4,250 – $8,600 | $6,400 | −2% |
| Iowa (statewide) | $4,300 – $8,700 | $6,500 | −1% |
| United States | $4,550 – $9,150 | $6,850 | +4% |
Across 300 US metros, Des Moines comes in at #150 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Des Moines is 1% above the Iowa figure.
Other Iowa metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Davenport, IA | 180,450 jobs | $4,350 – $8,900 | $6,650 | +1% |
| Cedar Rapids, IA | 139,260 jobs | $4,300 – $8,700 | $6,500 | −1% |
| Iowa City, IA | 93,760 jobs | $4,250 – $8,550 | $6,400 | −3% |
| Waterloo, IA | 84,260 jobs | $4,300 – $8,700 | $6,500 | −1% |
| Sioux City, IA | 75,010 jobs | $4,250 – $8,600 | $6,400 | −2% |
| Dubuque, IA | 58,470 jobs | $4,300 – $8,750 | $6,500 | −1% |
Cities with a workforce like Des Moines's
Big cities and small ones price differently, so here is Des Moines against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bridgeport, CT | 404,180 jobs | $4,550 – $9,300 | $6,950 | +6% |
| Columbia, SC | 394,200 jobs | $4,300 – $8,550 | $6,400 | −2% |
| Albuquerque, NM | 404,700 jobs | $4,350 – $8,700 | $6,550 | −1% |
| Charleston, SC | 394,170 jobs | $4,300 – $8,650 | $6,450 | −1% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,650 to $7,450 for Des Moines, IA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Des Moines, IA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Des Moines: your questions
+How much does it cost to install a vinyl fence in Des Moines?
For 150 linear ft, expect $4,350 to $8,800 in the Des Moines area. A standard-spec job lands at $5,650 to $7,450. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Des Moines?
About $28.50 to $57.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Des Moines or Waterloo?
Waterloo is 95 miles away. The midpoint for 150 linear ft there is $6,500, which is 1% less than Des Moines ($6,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Des Moines?
About 24% at the midpoint, or $1,550 out of $6,550. Materials are 75% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Des Moines?
$5,750 to $11,700. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Des Moines?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Des Moines area (our national range of $40 to $150 scaled by the local price level).
+Is Des Moines expensive for vinyl fence compared with the rest of Iowa?
Des Moines is 1% above the Iowa statewide estimate ($6,500 at the midpoint). We cover 7 metros in Iowa; see the state page to compare them.
+What do carpenters earn in Des Moines?
The BLS median is $29.50 an hour in the Des Moines area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.03 to $35.68.
+What do basic and premium vinyl fence work cost in Des Moines?
For 150 linear ft, basic work runs $4,350 to $6,100 and premium work $7,000 to $8,800. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Des Moines?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Des Moines?
$150 to $770, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Des Moines
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.