Vinyl fence cost in Bridgeport, CT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,550 – $9,300
- Per linear ft
- $30 – $61
- before permit
- Versus US midpoint
- +1%
- US $6,850
- Rank of 300 metros
- #61
- 1 = most expensive
Local price for a vinyl fence in the Bridgeport area: $4,550 to $9,300 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $30.39 an hour in the Bridgeport area, 4% above the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Bridgeport, CT, standard level
$6,000 to $7,900
About $39.50 to $51.50 per linear ft before permits. Labor is about 25% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,550 | $5,700 |
| Labor | $1,400 | $2,050 |
| Permits and fees | $80 | $130 |
| Total | $6,000 | $7,900 |
Cost breakdown for 150 linear ft in Bridgeport, CT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,650 | $5,100 | $6,550 | 74% |
| Labor | $860 | $1,700 | $2,600 | 25% |
| Permits and fees | $45 | $100 | $160 | 1% |
| Total | $4,550 | $6,950 | $9,300 | 100% |
Where the Bridgeport price comes from
Labor is 25% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Bridgeport the blended ratio comes out at 1.15.
Materials are scaled with BEA's regional price parity for goods. Bridgeport is at 97.3 against 100 for the US, so a materials line of $5,250 nationally becomes $5,100 here (midpoint, 150 linear ft). Permits follow the all-items index of 106.9: $45 to $160.
Add-ons priced for Bridgeport
Add-ons start from national price ranges and are scaled by 1.06 for Bridgeport, which is the average of the area's wage index (1.15) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $160 – $830 |
| Remove old fence | $1,600 – $3,200 |
How Bridgeport compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,900 to $7,800 across Bridgeport and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Bridgeport, CTthis page | $4,550 – $9,300 | $6,950 | |
| Waterbury, CT25 miles | $4,550 – $9,250 | $6,900 | −1% |
| New Haven, CT30 miles | $4,600 – $9,400 | $7,000 | +1% |
| Poughkeepsie, NY40 miles | $5,000 – $10,100 | $7,550 | +9% |
| New York, NY40 miles | $5,150 – $10,500 | $7,800 | +12% |
| Hartford, CT55 miles | $4,550 – $9,250 | $6,900 | level |
| Connecticut (statewide) | $4,550 – $9,300 | $6,950 | level |
| United States | $4,550 – $9,150 | $6,850 | −1% |
Out of the 300 metros we cover, Bridgeport ranks #61 for the cost of this job (#1 is the most expensive). Statewide, Bridgeport is 0% above the Connecticut figure.
Elsewhere in Connecticut
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Hartford, CT | 599,770 jobs | $4,550 – $9,250 | $6,900 | level |
| New Haven, CT | 281,410 jobs | $4,600 – $9,400 | $7,000 | +1% |
| Waterbury, CT | 160,710 jobs | $4,550 – $9,250 | $6,900 | −1% |
| Norwich, CT | 126,450 jobs | $4,500 – $9,150 | $6,850 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Bridgeport against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Albuquerque, NM | 404,700 jobs | $4,350 – $8,700 | $6,550 | −6% |
| Des Moines, IA | 404,130 jobs | $4,350 – $8,800 | $6,550 | −5% |
| Madison, WI | 408,070 jobs | $4,400 – $9,000 | $6,700 | −3% |
| Columbia, SC | 394,200 jobs | $4,300 – $8,550 | $6,400 | −7% |
The best months for vinyl fence in Bridgeport
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Bridgeport Sikorsky Mem Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Bridgeport are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Bridgeport gets about 44 inches of precipitation in a normal year, including roughly 34 inches of snow. The wettest months are March, April and August (4.2 inches in April). Inside the workable window, July and November are the driest, at 3.3 and 3.1 inches. The station averages about 9 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 38 | 24 | 3.2 | Cold |
| Feb | 41 | 26 | 3.1 | Cold |
| Mar | 47 | 32 | 4.1 | Workable |
| Apr | 58 | 42 | 4.2 | Workable |
| May | 68 | 52 | 3.6 | Workable |
| Jun | 78 | 62 | 3.8 | Workable |
| Jul | 83 | 68 | 3.3 | Workable |
| Aug | 82 | 67 | 4.0 | Workable |
| Sep | 75 | 60 | 4.0 | Workable |
| Oct | 64 | 48 | 3.8 | Workable |
| Nov | 54 | 38 | 3.1 | Workable |
| Dec | 44 | 30 | 4.0 | Cold |
Why two Bridgeport quotes can differ
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Cost by quality level and size in Bridgeport
The cited range is split into basic, standard and premium bands, then scaled to Bridgeport. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,550 to $6,450
4-ft picket or ranch rail
Standard
$6,000 to $7,900
6-ft privacy fence, standard white
Premium
$7,400 to $9,300
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,050 – $4,350 | $4,000 – $5,300 | $5,000 – $6,250 |
| 150 ft (150 linear ft) | $4,550 – $6,450 | $6,000 – $7,900 | $7,400 – $9,300 |
| 200 ft (200 linear ft) | $6,050 – $8,600 | $7,950 – $10,500 | $9,850 – $12,400 |
| full lot (300 linear ft) | $9,050 – $12,800 | $11,900 – $15,600 | $14,700 – $18,500 |
Who does the work: Bridgeport trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Bridgeport the blend is 1.15.
Carpenters (47-2031), 50% of the weighting: a median of $30.39 an hour, 4% above the US median of $29.12. The middle half of them earn between $27.19 and $37.89 an hour. About 1,100 work in the metro. That is 27.2 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $28.38 an hour, which is 25% above the national $22.66. The middle half of them earn between $23.18 and $35.00 an hour. BLS counts 1,930 of them working in the area, 47.8 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $190 to the midpoint estimate; the 25th percentile takes off about $80. That is a swing of roughly 1.2% to 2.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Bridgeport-Stamford-Danbury has 404,180 jobs in total (BLS, May 2025), ranking 63rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $27.19 | $30.39 | $37.89 | $29.12 | 1.04 | metro |
| Construction laborers (47-2061) | 50% | $23.18 | $28.38 | $35.00 | $22.66 | 1.25 | metro |
| Blended | 100% | 1.15 | |||||
Planning more than one job in Bridgeport?
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Bridgeport wage and price inputs. Compared with national midpoints, chain-link fence comes out highest (+9%) and wood fence lowest (+4%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,200 – $7,900 | +4% |
| Chain-link fence | 150 linear ft | $1,600 – $6,800 | +9% |
| Aluminum fence | 150 linear ft | $4,000 – $11,900 | +5% |
| Concrete slab | 400 sq ft | $2,600 – $5,450 | +5% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,000 to $7,900 for Bridgeport, CT is attached.
Detailed vinyl fence report for Bridgeport, CT, $9
The report lays out the vinyl fence numbers for Bridgeport, CT line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Bridgeport: your questions
+How much does it cost to install a vinyl fence in Bridgeport?
For 150 linear ft, expect $4,550 to $9,300 in the Bridgeport area. A standard-spec job lands at $6,000 to $7,900. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Bridgeport?
About $30 to $61 per linear ft for materials and labor, plus $45 to $160 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Bridgeport or Waterbury?
Waterbury is 25 miles away. The midpoint for 150 linear ft there is $6,900, which is 1% less than Bridgeport ($6,950). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Bridgeport?
About 25% at the midpoint, or $1,700 out of $6,950. Materials are 74% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Bridgeport?
$6,050 to $12,400. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Bridgeport?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $160 for fees in the Bridgeport area (our national range of $40 to $150 scaled by the local price level).
+Is Bridgeport expensive for vinyl fence compared with the rest of Connecticut?
Bridgeport is 0% above the Connecticut statewide estimate ($6,950 at the midpoint). We cover 5 metros in Connecticut; see the state page to compare them.
+What do carpenters earn in Bridgeport?
The BLS median is $30.39 an hour in the Bridgeport area, compared with $29.12 nationally. The 25th to 75th percentile range is $27.19 to $37.89.
+What do basic and premium vinyl fence work cost in Bridgeport?
For 150 linear ft, basic work runs $4,550 to $6,450 and premium work $7,400 to $9,300. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Bridgeport?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. July and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Bridgeport?
$160 to $830, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Bridgeport
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.