Vinyl fence cost in New Haven, CT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,600 – $9,400
- Per linear ft
- $30 – $61.50
- before permit
- Versus US midpoint
- +2%
- US $6,850
- Rank of 300 metros
- #54
- 1 = most expensive
If you want to install a vinyl fence in New Haven, plan on $4,600 to $9,400 for 150 linear ft, all in. Per linear ft, that is $30 to $61.50 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Carpenters earn a median of $31.61 an hour in the New Haven area, 9% above the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in New Haven, CT, standard level
$6,000 to $7,950
About $39.50 to $52 per linear ft before permits. Labor is about 25% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,550 | $5,700 |
| Labor | $1,400 | $2,150 |
| Permits and fees | $75 | $120 |
| Total | $6,000 | $7,950 |
Cost breakdown for 150 linear ft in New Haven, CT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,650 | $5,100 | $6,550 | 73% |
| Labor | $890 | $1,750 | $2,650 | 25% |
| Permits and fees | $40 | $100 | $160 | 1% |
| Total | $4,600 | $7,000 | $9,400 | 100% |
What is behind the New Haven number
The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $31.61 an hour. Add the other trades involved and the blended wage index for New Haven is 1.18 (US = 1.00), which puts labor at 25% of the total.
On the materials line, the BEA goods price index for the New Haven metro is 97.3 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,100, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (104.6) and land at $40 to $160.
Planning more than one job in New Haven?
Because every project leans on different trades, New Haven's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +11% and aluminum fence +4%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,250 – $8,050 | +5% |
| Chain-link fence | 150 linear ft | $1,650 – $6,950 | +11% |
| Aluminum fence | 150 linear ft | $4,000 – $11,800 | +4% |
| Concrete slab | 400 sq ft | $2,650 – $5,500 | +6% |
New Haven labor market for vinyl fence
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for New Haven is 1.18 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $31.61 an hour, which is 9% above the national $29.12. The middle half of them earn between $28.64 and $40.18 an hour. BLS counts 730 of them working in the area, 25.9 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 50% of the weighting: a median of $29.02 an hour, 28% above the US median of $22.66. The middle half of them earn between $23.36 and $35.51 an hour. About 1,220 work in the metro. That is 43.4 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($40.18 an hour) instead of the median, the labor line grows by about $220. At the 25th percentile ($28.64) it shrinks by about $75. The total moves by 3.2% or 1.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 281,410 jobs in the New Haven area. That makes it the 91st largest of the 300 metros we cover, with 0.18% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $28.64 | $31.61 | $40.18 | $29.12 | 1.09 | metro |
| Construction laborers (47-2061) | 50% | $23.36 | $29.02 | $35.51 | $22.66 | 1.28 | metro |
| Blended | 100% | 1.18 | |||||
Cost by quality level and size in New Haven
Three bands are cut from the same cited range and localized for New Haven wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,600 to $6,500
4-ft picket or ranch rail
Standard
$6,000 to $7,950
6-ft privacy fence, standard white
Premium
$7,450 to $9,400
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,050 – $4,350 | $4,050 – $5,350 | $5,000 – $6,300 |
| 150 ft (150 linear ft) | $4,600 – $6,500 | $6,000 – $7,950 | $7,450 – $9,400 |
| 200 ft (200 linear ft) | $6,100 – $8,650 | $8,000 – $10,600 | $9,900 – $12,500 |
| full lot (300 linear ft) | $9,100 – $12,900 | $12,000 – $15,800 | $14,800 – $18,600 |
New Haven against nearby metros and the rest of Connecticut
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,850 to $7,100 across New Haven and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| New Haven, CTthis page | $4,600 – $9,400 | $7,000 | |
| Waterbury, CT20 miles | $4,550 – $9,250 | $6,900 | −2% |
| Bridgeport, CT30 miles | $4,550 – $9,300 | $6,950 | −1% |
| Hartford, CT30 miles | $4,550 – $9,250 | $6,900 | −1% |
| Norwich, CT40 miles | $4,500 – $9,150 | $6,850 | −2% |
| Springfield, MA60 miles | $4,650 – $9,600 | $7,100 | +2% |
| Connecticut (statewide) | $4,550 – $9,300 | $6,950 | −1% |
| United States | $4,550 – $9,150 | $6,850 | −2% |
Across 300 US metros, New Haven comes in at #54 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, New Haven is 1% above the Connecticut figure.
Other Connecticut metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Hartford, CT | 599,770 jobs | $4,550 – $9,250 | $6,900 | −1% |
| Bridgeport, CT | 404,180 jobs | $4,550 – $9,300 | $6,950 | −1% |
| Waterbury, CT | 160,710 jobs | $4,550 – $9,250 | $6,900 | −2% |
| Norwich, CT | 126,450 jobs | $4,500 – $9,150 | $6,850 | −2% |
Cities with a workforce like New Haven's
Big cities and small ones price differently, so here is New Haven against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lexington, KY | 286,910 jobs | $4,350 – $8,700 | $6,500 | −7% |
| Reno, NV | 275,680 jobs | $4,450 – $9,050 | $6,750 | −4% |
| Portland, ME | 288,480 jobs | $4,450 – $9,050 | $6,750 | −3% |
| Fayetteville, AR | 275,180 jobs | $4,150 – $8,300 | $6,250 | −11% |
Optional extras in New Haven
Extras are quoted nationally and then scaled to New Haven by the average of the local wage index (1.18) and goods index (0.97), a factor of 1.08. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $160 – $840 |
| Remove old fence | $1,600 – $3,250 |
Climate in New Haven: timing your vinyl fence job
We use NOAA's 1991-2020 climate normals for New Haven Tweed Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in New Haven (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
New Haven gets about 42 inches of precipitation in a normal year. The wettest months are April, September and October (4.2 inches in April). Inside the workable window, July and November are the driest, at 3.4 and 3.1 inches. The station averages about 6 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 38 | 23 | 2.7 | Cold |
| Feb | 40 | 24 | 2.8 | Cold |
| Mar | 47 | 30 | 3.7 | Workable |
| Apr | 58 | 39 | 4.2 | Workable |
| May | 68 | 49 | 3.5 | Workable |
| Jun | 76 | 59 | 3.5 | Workable |
| Jul | 82 | 66 | 3.4 | Workable |
| Aug | 81 | 65 | 3.5 | Workable |
| Sep | 75 | 57 | 4.0 | Workable |
| Oct | 64 | 46 | 3.8 | Workable |
| Nov | 53 | 36 | 3.1 | Workable |
| Dec | 44 | 29 | 3.5 | Cold |
Specs and site conditions that change a New Haven bid
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,000 to $7,950 for New Haven, CT is attached.
Take this estimate with you: PDF report, $9
Multi-page report for New Haven, CT: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in New Haven: your questions
+How much does it cost to install a vinyl fence in New Haven?
For 150 linear ft, expect $4,600 to $9,400 in the New Haven area. A standard-spec job lands at $6,000 to $7,950. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in New Haven?
About $30 to $61.50 per linear ft for materials and labor, plus $40 to $160 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in New Haven or Waterbury?
Waterbury is 20 miles away. The midpoint for 150 linear ft there is $6,900, which is 2% less than New Haven ($7,000). Wage and materials indexes both feed that gap.
+How much of the bill is labor in New Haven?
About 25% at the midpoint, or $1,750 out of $7,000. Materials are 73% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in New Haven?
$6,100 to $12,500. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in New Haven?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $160 for fees in the New Haven area (our national range of $40 to $150 scaled by the local price level).
+Is New Haven expensive for vinyl fence compared with the rest of Connecticut?
New Haven is 1% above the Connecticut statewide estimate ($6,950 at the midpoint). We cover 5 metros in Connecticut; see the state page to compare them.
+What do carpenters earn in New Haven?
The BLS median is $31.61 an hour in the New Haven area, compared with $29.12 nationally. The 25th to 75th percentile range is $28.64 to $40.18.
+What do basic and premium vinyl fence work cost in New Haven?
For 150 linear ft, basic work runs $4,600 to $6,500 and premium work $7,450 to $9,400. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in New Haven?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. July and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in New Haven?
$160 to $840, from a national range scaled by the local wage and goods indexes.
Vinyl fence near New Haven
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.