Vinyl fence cost in Portland, ME
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,450 – $9,050
- Per linear ft
- $29.50 – $59.50
- before permit
- Versus US midpoint
- −1%
- US $6,850
- Rank of 300 metros
- #97
- 1 = most expensive
Portland homeowners pay roughly $4,450 to $9,050 to install a vinyl fence at 150 linear ft, or $29.50 to $59.50 per linear ft (permit not included). Against the US midpoint, Portland is almost level. Building materials run about 3% below the US average here (BEA goods price index 97.2).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Portland, ME, standard level
$5,850 to $7,700
About $38.50 to $50.50 per linear ft before permits. Labor is about 23% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,700 |
| Labor | $1,250 | $1,900 |
| Permits and fees | $75 | $120 |
| Total | $5,850 | $7,700 |
Cost breakdown for 150 linear ft in Portland, ME
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,650 | $5,100 | $6,550 | 75% |
| Labor | $780 | $1,550 | $2,350 | 23% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $4,450 | $6,750 | $9,050 | 100% |
Where the Portland price comes from
The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $30.91 an hour. Add the other trades involved and the blended wage index for Portland is 1.05 (US = 1.00), which puts labor at 23% of the total.
On the materials line, the BEA goods price index for the Portland metro is 97.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,100, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (101.9) and land at $40 to $150.
Related projects, priced for Portland
Because every project leans on different trades, Portland's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +2% and aluminum fence level.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,050 – $7,650 | level |
| Chain-link fence | 150 linear ft | $1,550 – $6,250 | +2% |
| Aluminum fence | 150 linear ft | $3,800 – $11,400 | level |
| Concrete slab | 400 sq ft | $2,500 – $5,250 | +1% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Portland is 1.05 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $30.91 an hour, which is 6% above the national $29.12. The middle half of them earn between $28.45 and $35.95 an hour. BLS counts 2,230 of them working in the area, 77.3 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 50% of the weighting: a median of $23.31 an hour, in line with the US median of $22.66. The middle half of them earn between $21.50 and $27.46 an hour. About 1,470 work in the metro. That is 51.0 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($35.95 an hour) instead of the median, the labor line grows by about $130. At the 25th percentile ($28.45) it shrinks by about $65. The total moves by 1.9% or 0.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 288,480 jobs in the Portland-South Portland area. That makes it the 89th largest of the 300 metros we cover, with 0.19% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $28.45 | $30.91 | $35.95 | $29.12 | 1.06 | metro |
| Construction laborers (47-2061) | 50% | $21.50 | $23.31 | $27.46 | $22.66 | 1.03 | metro |
| Blended | 100% | 1.05 | |||||
When to schedule vinyl fence in Portland
We use NOAA's 1991-2020 climate normals for Portland Intl Jetport (5 miles from the city center). These are 30-year monthly averages, not forecasts.
April through November is the stretch where exterior installation runs into the fewest weather problems in Portland (8 of 12 months). January, February, March and December have an average daytime high under 45°F.
In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Portland gets about 48 inches of precipitation in a normal year, including roughly 69 inches of snow. The wettest months are April, October and December (5.3 inches in October). Inside the workable window, July and August are the driest, at 3.4 and 3.6 inches. The station averages about 5 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 32 | 16 | 3.5 | Cold |
| Feb | 35 | 17 | 3.5 | Cold |
| Mar | 42 | 26 | 4.1 | Cold |
| Apr | 54 | 35 | 4.4 | Workable |
| May | 64 | 46 | 3.7 | Workable |
| Jun | 74 | 55 | 4.2 | Workable |
| Jul | 80 | 61 | 3.4 | Workable |
| Aug | 79 | 60 | 3.6 | Workable |
| Sep | 71 | 52 | 3.8 | Workable |
| Oct | 60 | 41 | 5.3 | Workable |
| Nov | 48 | 32 | 4.3 | Workable |
| Dec | 38 | 22 | 4.5 | Cold |
Pick a size, pick a tier: vinyl fence pricing in Portland
Three bands are cut from the same cited range and localized for Portland wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,450 to $6,300
4-ft picket or ranch rail
Standard
$5,850 to $7,700
6-ft privacy fence, standard white
Premium
$7,250 to $9,050
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,000 – $4,250 | $3,900 – $5,150 | $4,850 – $6,100 |
| 150 ft (150 linear ft) | $4,450 – $6,300 | $5,850 – $7,700 | $7,250 – $9,050 |
| 200 ft (200 linear ft) | $5,950 – $8,400 | $7,750 – $10,200 | $9,600 – $12,000 |
| full lot (300 linear ft) | $8,900 – $12,500 | $11,600 – $15,300 | $14,300 – $18,000 |
Is Portland cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,750 to $7,300 across Portland and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Portland, MEthis page | $4,450 – $9,050 | $6,750 | |
| Manchester, NH85 miles | $4,450 – $9,000 | $6,750 | level |
| Boston, MA85 miles | $4,750 – $9,800 | $7,300 | +8% |
| Worcester, MA120 miles | $4,600 – $9,500 | $7,050 | +5% |
| Barnstable, MA135 miles | $4,600 – $9,450 | $7,000 | +4% |
| Providence, RI140 miles | $4,550 – $9,250 | $6,900 | +2% |
| Maine (statewide) | $4,450 – $8,950 | $6,700 | −1% |
| United States | $4,550 – $9,150 | $6,850 | +1% |
Across 300 US metros, Portland comes in at #97 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Portland is 1% above the Maine figure.
Other Maine metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bangor, ME | 72,270 jobs | $4,400 – $8,800 | $6,600 | −2% |
Cities with a workforce like Portland's
Big cities and small ones price differently, so here is Portland against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Stockton, CA | 289,660 jobs | $4,850 – $9,900 | $7,400 | +9% |
| Lexington, KY | 286,910 jobs | $4,350 – $8,700 | $6,500 | −4% |
| Toledo, OH | 291,530 jobs | $4,350 – $8,800 | $6,550 | −3% |
| New Haven, CT | 281,410 jobs | $4,600 – $9,400 | $7,000 | +3% |
Specs and site conditions that change a Portland bid
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Optional extras in Portland
Extras are quoted nationally and then scaled to Portland by the average of the local wage index (1.05) and goods index (0.97), a factor of 1.01. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $150 – $790 |
| Remove old fence | $1,500 – $3,050 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,850 to $7,700 for Portland, ME is attached.
Take this estimate with you: PDF report, $9
The report lays out the vinyl fence numbers for Portland, ME line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Portland: your questions
+How much does it cost to install a vinyl fence in Portland?
For 150 linear ft, expect $4,450 to $9,050 in the Portland area. A standard-spec job lands at $5,850 to $7,700. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Portland?
About $29.50 to $59.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Portland or Manchester?
Manchester is 85 miles away. The midpoint for 150 linear ft there is $6,750, which is 0% less than Portland ($6,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Portland?
About 23% at the midpoint, or $1,550 out of $6,750. Materials are 75% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Portland?
$5,950 to $12,000. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Portland?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Portland area (our national range of $40 to $150 scaled by the local price level).
+Is Portland expensive for vinyl fence compared with the rest of Maine?
Portland is 1% above the Maine statewide estimate ($6,700 at the midpoint). We cover 2 metros in Maine; see the state page to compare them.
+What do carpenters earn in Portland?
The BLS median is $30.91 an hour in the Portland area, compared with $29.12 nationally. The 25th to 75th percentile range is $28.45 to $35.95.
+What do basic and premium vinyl fence work cost in Portland?
For 150 linear ft, basic work runs $4,450 to $6,300 and premium work $7,250 to $9,050. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Portland?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. July and August are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Portland?
$150 to $790, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Portland
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.