Vinyl fence cost in Maine
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (150 linear ft)
- $4,450 – $8,950
- Per linear ft
- $29.50 – $59
- before permit
- Versus US midpoint
- −2%
- US $6,850
- Metros covered
- 2
Across Maine, a vinyl fence costs about $4,450 to $8,950 for 150 linear ft. Statewide, that midpoint is 2% below the US figure of $6,850. Carpenters earn a median $29.88 an hour in Maine (US: $29.12).
Inside Maine, the metros we cover range from $6,600 (Bangor) to $6,750 (Portland) at the midpoint.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Maine (statewide), standard level
$5,800 to $7,600
About $38 to $50 per linear ft before permits. Labor is about 23% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,700 |
| Labor | $1,200 | $1,800 |
| Permits and fees | $70 | $110 |
| Total | $5,800 | $7,600 |
Cost breakdown for 150 linear ft in Maine
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,650 | $5,100 | $6,550 | 76% |
| Labor | $750 | $1,500 | $2,250 | 23% |
| Permits and fees | $40 | $90 | $150 | 1% |
| Total | $4,450 | $6,700 | $8,950 | 100% |
Maine labor market for vinyl fence
Maine's labor line is priced from 2 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.01 times the national level.
Carpenters (47-2031), 50% of the weighting: a median of $29.88 an hour, in line with the US median of $29.12. The middle half of them earn between $25.46 and $35.00 an hour. About 5,170 work in the state. That is 80.7 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $22.32 an hour, which is in line with the national $22.66. The middle half of them earn between $19.51 and $25.51 an hour. BLS counts 3,960 of them working in the state, 61.8 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A crew paid at the 75th percentile for carpenters ($35.00 an hour) would add about $130 to the statewide midpoint; one at the 25th percentile ($25.46) would take off about $110. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 640,610 jobs across Maine (May 2025), which is 0.4% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $25.46 | $29.88 | $35.00 | $29.12 | 1.03 | state |
| Construction laborers (47-2061) | 50% | $19.51 | $22.32 | $25.51 | $22.66 | 0.98 | state |
| Blended | 100% | 1.01 | |||||
Which Maine city is cheapest for vinyl fence?
1 of the 2 metros sit above the statewide midpoint of $6,700, and the top-to-bottom gap is 2%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (150 linear ft) | Midpoint | vs. state |
|---|---|---|---|
| Portland, ME | $4,450 – $9,050 | $6,750 | +1% |
| Bangor, ME | $4,400 – $8,800 | $6,600 | −1% |
How Maine compares with nearby states
Maine ranks 21 of 51 (the 50 states plus DC) for vinyl fence, where 1 is the most expensive. The costliest is Hawaii at $8,250 and the cheapest Arkansas at $6,200, both for 150 linear ft at the midpoint. Maine sits at $6,700. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New Hampshire | 110 miles away | $4,500 – $9,150 | $6,850 | +2% |
| Massachusetts | 120 miles away | $4,700 – $9,750 | $7,250 | +8% |
| Vermont | 150 miles away | $4,450 – $9,050 | $6,750 | +1% |
| Rhode Island | 170 miles away | $4,500 – $9,200 | $6,850 | +2% |
| Connecticut | 220 miles away | $4,550 – $9,300 | $6,950 | +3% |
Extras that change the Maine total
Add-ons start from national price ranges and are scaled by 0.99 for Maine, which is the average of the area's wage index (1.01) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $150 – $770 |
| Remove old fence | $1,500 – $2,950 |
Related projects, priced for Maine
Each project weights the trades differently, so Maine's wage level does not push every price by the same amount. Compared with the US midpoint, chain-link fence is −1% and concrete slab −2%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,000 – $7,550 | −1% |
| Chain-link fence | 150 linear ft | $1,500 – $6,100 | −1% |
| Aluminum fence | 150 linear ft | $3,750 – $11,200 | −2% |
| Concrete slab | 400 sq ft | $2,400 – $5,050 | −2% |
Basic, standard or premium: Maine prices
Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,450 to $6,250
4-ft picket or ranch rail
Standard
$5,800 to $7,600
6-ft privacy fence, standard white
Premium
$7,150 to $8,950
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,950 – $4,200 | $3,900 – $5,100 | $4,800 – $6,050 |
| 150 ft (150 linear ft) | $4,450 – $6,250 | $5,800 – $7,600 | $7,150 – $8,950 |
| 200 ft (200 linear ft) | $5,900 – $8,300 | $7,700 – $10,100 | $9,500 – $11,900 |
| full lot (300 linear ft) | $8,850 – $12,400 | $11,500 – $15,100 | $14,200 – $17,800 |
Why two Maine quotes can differ
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
When Maine weather lets you install
Weather decides when exterior installation can happen, and Maine is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.
Every Maine metro on the list has 8 comfortable months, though rainfall ranges from 42 inches a year in Bangor to 48 in Portland.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Portland | 16 | 80 | 48 | 8: April through November |
| Bangor | 9 | 80 | 42 | 8: April through November |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,800 to $7,600 for Maine is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Maine: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Maine: your questions
+How much does it cost to install a vinyl fence in Maine?
$4,450 to $8,950 for 150 linear ft, using statewide wages and prices. Metro areas inside Maine can sit above or below that.
+Which city in Maine is cheapest for vinyl fence?
Bangor at about $6,600 (midpoint, 150 linear ft). The priciest is Portland at $6,750.
+Is vinyl fence cheaper in Maine than the US average?
It is 2% cheaper: $6,700 against $6,850 for 150 linear ft at the midpoint.
+What share of the price is labor in Maine?
About 23% ($1,500). Materials are 76%. Statewide labor for this job is weighted 1.01x the national wage level.
+What do carpenters earn in Maine?
The BLS statewide median is $29.88 an hour, against $29.12 for the US. The 25th to 75th percentile range is $25.46 to $35.00.
+Where does Maine rank for vinyl fence costs?
21st most expensive of 51 (the 50 states plus DC) at the midpoint, $6,700 for 150 linear ft. Rank 1 is the costliest.
+What do basic and premium vinyl fence work cost in Maine?
For 150 linear ft, basic work runs $4,450 to $6,250 and premium work $7,150 to $8,950. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+Does the season matter for vinyl fence in Maine?
Yes where winters or summers are hard. Of the Maine metros we cover, Portland has the most comfortable months (8 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
+What does "add one gate" add in Maine?
$150 to $770, from a national range scaled by the statewide wage and goods indexes.
Vinyl fence by city in Maine
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.