Vinyl fence cost in Stockton, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,850 – $9,900
- Per linear ft
- $32 – $65
- before permit
- Versus US midpoint
- +8%
- US $6,850
- Rank of 300 metros
- #28
- 1 = most expensive
Local price for a vinyl fence in the Stockton area: $4,850 to $9,900 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 8% higher than the US figure. Building materials run about 5% above the US average here (BEA goods price index 105.2).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Stockton, CA, standard level
$6,400 to $8,400
About $42 to $55 per linear ft before permits. Labor is about 24% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,900 | $6,150 |
| Labor | $1,400 | $2,100 |
| Permits and fees | $75 | $120 |
| Total | $6,400 | $8,400 |
Cost breakdown for 150 linear ft in Stockton, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $5,500 | $7,100 | 75% |
| Labor | $890 | $1,750 | $2,650 | 24% |
| Permits and fees | $40 | $100 | $160 | 1% |
| Total | $4,850 | $7,400 | $9,900 | 100% |
Where the Stockton price comes from
Labor is 24% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Stockton the blended ratio comes out at 1.18.
Materials are scaled with BEA's regional price parity for goods. Stockton is at 105.2 against 100 for the US, so a materials line of $5,250 nationally becomes $5,500 here (midpoint, 150 linear ft). Permits follow the all-items index of 105.1: $40 to $160.
Stockton against nearby metros and the rest of California
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $7,400 to $8,050 across Stockton and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Stockton, CAthis page | $4,850 – $9,900 | $7,400 | |
| Modesto, CA30 miles | $4,900 – $10,100 | $7,500 | +1% |
| Vallejo, CA45 miles | $4,950 – $10,200 | $7,550 | +2% |
| San Francisco, CA55 miles | $5,250 – $10,900 | $8,050 | +9% |
| Merced, CA60 miles | $4,900 – $9,950 | $7,400 | level |
| Sacramento, CA60 miles | $4,950 – $10,100 | $7,500 | +2% |
| California (statewide) | $4,950 – $10,200 | $7,550 | +2% |
| United States | $4,550 – $9,150 | $6,850 | −7% |
Out of the 300 metros we cover, Stockton ranks #28 for the cost of this job (#1 is the most expensive). Statewide, Stockton is 2% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $5,000 – $10,200 | $7,600 | +3% |
| San Francisco, CA | 2,373,920 jobs | $5,250 – $10,900 | $8,050 | +9% |
| Riverside, CA | 1,716,760 jobs | $4,750 – $9,750 | $7,250 | −2% |
| San Diego, CA | 1,538,060 jobs | $5,000 – $10,200 | $7,600 | +3% |
| San Jose, CA | 1,134,970 jobs | $5,050 – $10,400 | $7,700 | +4% |
| Sacramento, CA | 1,080,590 jobs | $4,950 – $10,100 | $7,500 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Stockton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Toledo, OH | 291,530 jobs | $4,350 – $8,800 | $6,550 | −11% |
| Portland, ME | 288,480 jobs | $4,450 – $9,050 | $6,750 | −8% |
| McAllen, TX | 296,700 jobs | $4,100 – $8,050 | $6,050 | −18% |
| Lexington, KY | 286,910 jobs | $4,350 – $8,700 | $6,500 | −12% |
The best months for vinyl fence in Stockton
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Stockton Fire Stn 4 (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Stockton are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Stockton gets about 17 inches of precipitation in a normal year. The wettest months are January, February and December (3.6 inches in January). Inside the workable window, May and October are the driest, at 0.6 and 1.0 inches. The station averages about 90 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 58 | 39 | 3.6 | Workable |
| Feb | 65 | 42 | 3.1 | Workable |
| Mar | 70 | 46 | 2.4 | Workable |
| Apr | 75 | 49 | 1.4 | Workable |
| May | 83 | 54 | 0.6 | Workable |
| Jun | 91 | 58 | 0.1 | Hot |
| Jul | 95 | 61 | 0.0 | Hot |
| Aug | 95 | 60 | 0.0 | Hot |
| Sep | 92 | 57 | 0.1 | Hot |
| Oct | 82 | 51 | 1.0 | Workable |
| Nov | 69 | 44 | 1.8 | Workable |
| Dec | 59 | 39 | 3.1 | Workable |
Stockton: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Stockton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,850 to $6,900
4-ft picket or ranch rail
Standard
$6,400 to $8,400
6-ft privacy fence, standard white
Premium
$7,900 to $9,900
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,250 – $4,600 | $4,300 – $5,650 | $5,300 – $6,650 |
| 150 ft (150 linear ft) | $4,850 – $6,900 | $6,400 – $8,400 | $7,900 – $9,900 |
| 200 ft (200 linear ft) | $6,500 – $9,150 | $8,500 – $11,200 | $10,500 – $13,200 |
| full lot (300 linear ft) | $9,700 – $13,700 | $12,700 – $16,700 | $15,700 – $19,700 |
Planning more than one job in Stockton?
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Stockton wage and price inputs. Compared with national midpoints, chain-link fence comes out highest (+13%) and concrete slab lowest (+8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,400 – $8,400 | +10% |
| Chain-link fence | 150 linear ft | $1,700 – $7,000 | +13% |
| Aluminum fence | 150 linear ft | $4,150 – $12,400 | +9% |
| Concrete slab | 400 sq ft | $2,650 – $5,600 | +8% |
Add-ons priced for Stockton
Add-ons start from national price ranges and are scaled by 1.12 for Stockton, which is the average of the area's wage index (1.18) and goods price index (1.05). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $170 – $870 |
| Remove old fence | $1,650 – $3,350 |
Why two Stockton quotes can differ
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Who does the work: Stockton trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Stockton the blend is 1.18.
Carpenters (47-2031), 50% of the weighting: a median of $33.25 an hour, 14% above the US median of $29.12. The middle half of them earn between $27.66 and $39.57 an hour. About 1,260 work in the metro. That is 43.5 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 50%) the local median is $27.62 an hour, which is 22% above the national $22.66. The middle half of them earn between $22.65 and $37.23 an hour. BLS counts 1,470 of them working in the area, 50.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $160 to the midpoint estimate; the 25th percentile takes off about $140. That is a swing of roughly 1.9% to 2.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Stockton-Lodi has 289,660 jobs in total (BLS, May 2025), ranking 88th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $27.66 | $33.25 | $39.57 | $29.12 | 1.14 | metro |
| Construction laborers (47-2061) | 50% | $22.65 | $27.62 | $37.23 | $22.66 | 1.22 | metro |
| Blended | 100% | 1.18 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,400 to $8,400 for Stockton, CA is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Stockton, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Stockton: your questions
+How much does it cost to install a vinyl fence in Stockton?
For 150 linear ft, expect $4,850 to $9,900 in the Stockton area. A standard-spec job lands at $6,400 to $8,400. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Stockton?
About $32 to $65 per linear ft for materials and labor, plus $40 to $160 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Stockton or Modesto?
Modesto is 30 miles away. The midpoint for 150 linear ft there is $7,500, which is 1% more than Stockton ($7,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Stockton?
About 24% at the midpoint, or $1,750 out of $7,400. Materials are 75% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Stockton?
$6,500 to $13,200. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Stockton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $160 for fees in the Stockton area (our national range of $40 to $150 scaled by the local price level).
+Is Stockton expensive for vinyl fence compared with the rest of California?
Stockton is 2% below the California statewide estimate ($7,550 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do carpenters earn in Stockton?
The BLS median is $33.25 an hour in the Stockton area, compared with $29.12 nationally. The 25th to 75th percentile range is $27.66 to $39.57.
+What do basic and premium vinyl fence work cost in Stockton?
For 150 linear ft, basic work runs $4,850 to $6,900 and premium work $7,900 to $9,900. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Stockton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Stockton?
$170 to $870, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Stockton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.