Skip to content
CostLocal

Vinyl fence cost in Lexington, KY

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$4,350 – $8,700
Per linear ft
$28.50 – $57
before permit
Versus US midpoint
−5%
US $6,850
Rank of 300 metros
#167
1 = most expensive

Lexington homeowners pay roughly $4,350 to $8,700 to install a vinyl fence at 150 linear ft, or $28.50 to $57 per linear ft (permit not included). Against the US midpoint, Lexington is 5% lower. Building materials run about 4% below the US average here (BEA goods price index 96.2).

Estimate your vinyl fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

6-ft privacy fence, standard white

Add-ons

Estimated cost for 150 linear ft in Lexington, KY, standard level

$5,650 to $7,400

About $37 to $48.50 per linear ft before permits. Labor is about 21% of the bill.

Cost breakdown
PartLowHigh
Materials$4,500$5,650
Labor$1,100$1,650
Permits and fees$70$110
Total$5,650$7,400
Save and get a PDF report

Cost breakdown for 150 linear ft in Lexington, KY

Part of the jobLowMidpointHighShare
Materials$3,600$5,050$6,50077%
Labor$690$1,400$2,05021%
Permits and fees$35$90$1401%
Total$4,350$6,500$8,700100%

What is behind the Lexington number

The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $25.01 an hour. Add the other trades involved and the blended wage index for Lexington is 0.92 (US = 1.00), which puts labor at 21% of the total.

On the materials line, the BEA goods price index for the Lexington metro is 96.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,050, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (92.9) and land at $35 to $140.

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Lexington is 0.92 times the national level.

For carpenters (47-2031, weighted 50%) the local median is $25.01 an hour, which is 14% below the national $29.12. The middle half of them earn between $22.63 and $29.61 an hour. BLS counts 1,200 of them working in the area, 41.8 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Construction laborers (47-2061), 50% of the weighting: a median of $22.26 an hour, in line with the US median of $22.66. The middle half of them earn between $18.37 and $24.40 an hour. About 1,810 work in the metro. That is 63.1 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($29.61 an hour) instead of the median, the labor line grows by about $120. At the 25th percentile ($22.63) it shrinks by about $60. The total moves by 1.8% or 0.9%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 286,910 jobs in the Lexington-Fayette area. That makes it the 90th largest of the 300 metros we cover, with 0.18% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)50%$22.63$25.01$29.61$29.120.86metro
Construction laborers (47-2061)50%$18.37$22.26$24.40$22.660.98metro
Blended100%0.92

Pick a size, pick a tier: vinyl fence pricing in Lexington

Three bands are cut from the same cited range and localized for Lexington wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$4,350 to $6,100

4-ft picket or ranch rail

Standard

$5,650 to $7,400

6-ft privacy fence, standard white

Premium

$6,950 to $8,700

Tall or colored privacy, many corners and gates

Cost by size and quality level
SizeBasicStandardPremium
backyard (100 linear ft)$2,900 – $4,100$3,800 – $4,950$4,650 – $5,850
150 ft (150 linear ft)$4,350 – $6,100$5,650 – $7,400$6,950 – $8,700
200 ft (200 linear ft)$5,750 – $8,100$7,500 – $9,850$9,250 – $11,600
full lot (300 linear ft)$8,650 – $12,100$11,200 – $14,700$13,800 – $17,300

Is Lexington cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,450 to $6,650 across Lexington and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Lexington, KYthis page$4,350 – $8,700$6,500
Cincinnati, OH65 miles$4,350 – $8,900$6,650+2%
Louisville, KY70 miles$4,350 – $8,800$6,600+1%
Huntington, WV100 miles$4,350 – $8,700$6,500level
Dayton, OH120 miles$4,350 – $8,800$6,550+1%
Bowling Green, KY130 miles$4,300 – $8,600$6,450−1%
Kentucky (statewide)$4,300 – $8,700$6,500level
United States$4,550 – $9,150$6,850+5%

Across 300 US metros, Lexington comes in at #167 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Lexington is 0% above the Kentucky figure.

Other Kentucky metros

Kentucky metros compared with Lexington
MetroSizeRangeMidpointvs. here
Louisville, KY685,190 jobs$4,350 – $8,800$6,600+1%
Bowling Green, KY82,160 jobs$4,300 – $8,600$6,450−1%

Cities with a workforce like Lexington's

Big cities and small ones price differently, so here is Lexington against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Portland, ME288,480 jobs$4,450 – $9,050$6,750+4%
New Haven, CT281,410 jobs$4,600 – $9,400$7,000+7%
Stockton, CA289,660 jobs$4,850 – $9,900$7,400+13%
Reno, NV275,680 jobs$4,450 – $9,050$6,750+3%

Specs and site conditions that change a Lexington bid

  • Removal

    Taking down an old fence is $10-$20 per linear foot extra, with disposal.

  • Permit

    Fence permits run $40-$150 depending on location.

  • Type and height

    A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).

What nearby projects cost in Lexington

Because every project leans on different trades, Lexington's wage level does not move all prices equally. Against the US midpoint, aluminum fence runs −5% and wood fence −6%.

Related projects with local prices
ProjectSizeRangevs. US
Wood fence150 linear ft$2,850 – $7,200−6%
Chain-link fence150 linear ft$1,450 – $5,800−6%
Aluminum fence150 linear ft$3,600 – $10,900−5%
Concrete slab400 sq ft$2,300 – $4,950−5%

When to schedule vinyl fence in Lexington

We use NOAA's 1991-2020 climate normals for Lexington Bluegrass Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.

February through December is the stretch where exterior installation runs into the fewest weather problems in Lexington (11 of 12 months). January has an average daytime high under 45°F.

In January the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Lexington gets about 50 inches of precipitation in a normal year, including roughly 15 inches of snow. The wettest months are May, June and July (5.4 inches in May). Inside the workable window, September and November are the driest, at 3.4 and 3.4 inches. The station averages about 25 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Lexington Bluegrass Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan42253.4Cold
Feb47283.6Workable
Mar56364.5Workable
Apr67454.4Workable
May76555.4Workable
Jun84635.0Workable
Jul87675.1Workable
Aug86653.7Workable
Sep80583.4Workable
Oct69473.7Workable
Nov56363.4Workable
Dec46304.2Workable

Extras that change the Lexington total

Extras are quoted nationally and then scaled to Lexington by the average of the local wage index (0.92) and goods index (0.96), a factor of 0.94. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add one gate (flat)$140 – $730
Remove old fence$1,400 – $2,800

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,650 to $7,400 for Lexington, KY is attached.

Take this estimate with you: PDF report, $9

The report lays out the vinyl fence numbers for Lexington, KY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Vinyl fence in Lexington: your questions

+How much does it cost to install a vinyl fence in Lexington?

For 150 linear ft, expect $4,350 to $8,700 in the Lexington area. A standard-spec job lands at $5,650 to $7,400. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for vinyl fence in Lexington?

About $28.50 to $57 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.

+Is vinyl fence cheaper in Lexington or Cincinnati?

Cincinnati is 65 miles away. The midpoint for 150 linear ft there is $6,650, which is 2% more than Lexington ($6,500). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Lexington?

About 21% at the midpoint, or $1,400 out of $6,500. Materials are 77% and permits 1%. Nationally, labor is 22%.

+What would 200 ft (200 linear ft) cost in Lexington?

$5,750 to $11,600. Pick a different size in the estimator above to get your own number.

+Does vinyl fence need a permit in Lexington?

Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Lexington area (our national range of $40 to $150 scaled by the local price level).

+Is Lexington expensive for vinyl fence compared with the rest of Kentucky?

Lexington is 0% above the Kentucky statewide estimate ($6,500 at the midpoint). We cover 3 metros in Kentucky; see the state page to compare them.

+What do carpenters earn in Lexington?

The BLS median is $25.01 an hour in the Lexington area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.63 to $29.61.

+What do basic and premium vinyl fence work cost in Lexington?

For 150 linear ft, basic work runs $4,350 to $6,100 and premium work $6,950 to $8,700. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.

+When is the best time to install a vinyl fence in Lexington?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. September and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Lexington?

$140 to $730, from a national range scaled by the local wage and goods indexes.

Vinyl fence near Lexington

Vinyl fence: all pricesVinyl fence in KentuckyAll projects in LexingtonKentucky cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.