Concrete slab cost in Lexington, KY

Lexington: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Lexington wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 5 common sizes.

Specs and site conditions that change a Lexington bid

• Finish

  A broom finish is the baseline. Stamped, stained, or exposed-aggregate finishes are priced as add-ons on top of the slab.

• Thickness and mix

  A 4-inch slab uses about 1.23 cubic yards of concrete per 100 sq ft; a 6-inch slab uses about 1.85. Stepping up from a 3,000 PSI to a 4,000-4,500 PSI mix adds $10-$40 per cubic yard (Estimators.us).

• Base and reinforcement

  A compacted gravel base, vapor barrier, and wire mesh or rebar are priced separately by some contractors and bundled by others. Ask which one your quote does.

Related projects, priced for Lexington

Because every project leans on different trades, Lexington's wage level does not move all prices equally. Against the US midpoint, gravel driveway runs −3% and detached garage −7%.

Extras that change the Lexington total

Extras are quoted nationally and then scaled to Lexington by the average of the local wage index (0.93) and goods index (0.96), a factor of 0.95. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

How Lexington compares

Of the five closest metros, 1 is cheaper than Lexington. Bowling Green is the lowest at about $3,550 (midpoint, 400 sq ft), 130 miles away.

Across 300 US metros, Lexington comes in at #174 from the top. The priciest is Kahului, HI at $5,300; the cheapest is McAllen, TX at $3,200 (midpoints, 400 sq ft). Statewide, Lexington is 1% above the Kentucky figure.

Other Kentucky metros

Cities with a workforce like Lexington's

Big cities and small ones price differently, so here is Lexington against the 4 metros with the closest total employment.

Climate in Lexington: timing your concrete slab job

We use NOAA's 1991-2020 climate normals for Lexington Bluegrass Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.

April through October is the stretch where pouring concrete runs into the fewest weather problems in Lexington (7 of 12 months). January, February, March, November and December have an average overnight low of 40°F or below.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Lexington gets about 50 inches of precipitation in a normal year, including roughly 15 inches of snow. The wettest months are May, June and July (5.4 inches in May). Inside the workable window, September and October are the driest, at 3.4 and 3.7 inches. The station averages about 25 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Lexington labor market for concrete slab

Wages are the part of this estimate that changes most from town to town. 4 trades carry the job here, and each is compared with its US median. The weighted result for Lexington is 0.93 times the national level.

For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $24.92 an hour, which is 9% below the national $27.41. The middle half of them earn between $21.38 and $31.33 an hour. BLS counts 110 of them working in the area, 3.8 for every 10,000 jobs (US: 13.3), so the local bench is thinner than average.

Construction laborers (47-2061), 30% of the weighting: a median of $22.26 an hour, in line with the US median of $22.66. The middle half of them earn between $18.37 and $24.40 an hour. About 1,810 work in the metro. That is 63.1 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $28.15 an hour, which is in line with the national $28.78. The middle half of them earn between $23.74 and $31.73 an hour. BLS counts 760 of them working in the area, 26.5 for every 10,000 jobs (US: 30.7), so the local bench is about average.

For carpenters (47-2031, weighted 10%) the local median is $25.01 an hour, which is 14% below the national $29.12. The middle half of them earn between $22.63 and $29.61 an hour. BLS counts 1,200 of them working in the area, 41.8 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($31.33 an hour) instead of the median, the labor line grows by about $190. At the 25th percentile ($21.38) it shrinks by about $100. The total moves by 5.2% or 2.8%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 286,910 jobs in the Lexington-Fayette area. That makes it the 90th largest of the 300 metros we cover, with 0.18% of US employment.