Aluminum fence cost in New Haven, CT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,000 – $11,800
- Per linear ft
- $26.50 – $78
- before permit
- Versus US midpoint
- +4%
- US $7,600
- Rank of 300 metros
- #57
- 1 = most expensive
If you want to install an aluminum fence in New Haven, plan on $4,000 to $11,800 for 150 linear ft, all in. Per linear ft, that is $26.50 to $78 for materials and labor, with the permit on top. The local midpoint runs 4% higher than the national one. Carpenters earn a median of $31.61 an hour in the New Haven area, 9% above the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in New Haven, CT, standard level
$6,350 to $9,500
About $42 to $62.50 per linear ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,750 |
| Labor | $2,550 | $3,600 |
| Permits and fees | $75 | $120 |
| Total | $6,350 | $9,500 |
Cost breakdown for 150 linear ft in New Haven, CT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,200 | $4,750 | $7,300 | 60% |
| Labor | $1,750 | $3,050 | $4,400 | 39% |
| Permits and fees | $40 | $100 | $160 | 1% |
| Total | $4,000 | $7,900 | $11,800 | 100% |
Why New Haven prices look the way they do
The wage side of the estimate leans on carpenters, who do 40% of the hours on a typical job. Their local median is $31.61 an hour. Add the other trades involved and the blended wage index for New Haven is 1.17 (US = 1.00), which puts labor at 39% of the total.
On the materials line, the BEA goods price index for the New Haven metro is 97.3 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,750, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (104.6) and land at $40 to $160.
Extras that change the New Haven total
Extras are quoted nationally and then scaled to New Haven by the average of the local wage index (1.17) and goods index (0.97), a factor of 1.07. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $210 – $960 |
How New Haven compares
Same job, same size (150 linear ft), priced for the nearest metros. Springfield is the priciest of the group at $8,200. Waterbury is the cheapest at $7,700.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| New Haven, CTthis page | $4,000 – $11,800 | $7,900 | |
| Waterbury, CT20 miles | $3,850 – $11,600 | $7,700 | −3% |
| Bridgeport, CT30 miles | $4,000 – $11,900 | $7,950 | level |
| Hartford, CT30 miles | $3,950 – $11,800 | $7,900 | level |
| Norwich, CT40 miles | $3,900 – $11,700 | $7,800 | −2% |
| Springfield, MA60 miles | $4,150 – $12,200 | $8,200 | +3% |
| Connecticut (statewide) | $4,000 – $11,900 | $7,900 | level |
| United States | $3,800 – $11,400 | $7,600 | −4% |
Across 300 US metros, New Haven comes in at #57 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, New Haven is 0% below the Connecticut figure.
Other Connecticut metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Hartford, CT | 599,770 jobs | $3,950 – $11,800 | $7,900 | level |
| Bridgeport, CT | 404,180 jobs | $4,000 – $11,900 | $7,950 | level |
| Waterbury, CT | 160,710 jobs | $3,850 – $11,600 | $7,700 | −3% |
| Norwich, CT | 126,450 jobs | $3,900 – $11,700 | $7,800 | −2% |
Cities with a workforce like New Haven's
Big cities and small ones price differently, so here is New Haven against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lexington, KY | 286,910 jobs | $3,600 – $10,900 | $7,250 | −9% |
| Reno, NV | 275,680 jobs | $3,700 – $11,100 | $7,400 | −6% |
| Portland, ME | 288,480 jobs | $3,800 – $11,400 | $7,600 | −4% |
| Fayetteville, AR | 275,180 jobs | $3,350 – $10,200 | $6,750 | −15% |
Cost by quality level and size in New Haven
Three bands are cut from the same cited range and localized for New Haven wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$4,000 to $7,150
Standard picket or ornamental, 4 ft
Standard
$6,350 to $9,500
Ornamental pool-code fence, 4-5 ft
Premium
$8,700 to $11,800
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,650 – $4,800 | $4,250 – $6,350 | $5,850 – $7,950 |
| 150 ft (150 linear ft) | $4,000 – $7,150 | $6,350 – $9,500 | $8,700 – $11,800 |
| 200 ft (200 linear ft) | $5,300 – $9,450 | $8,450 – $12,600 | $11,600 – $15,700 |
Aluminum fence: what moves the price in New Haven
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
New Haven labor market for aluminum fence
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for New Haven is 1.17 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $31.61 an hour, which is 9% above the national $29.12. The middle half of them earn between $28.64 and $40.18 an hour. BLS counts 730 of them working in the area, 25.9 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 40% of the weighting: a median of $29.02 an hour, 28% above the US median of $22.66. The middle half of them earn between $23.36 and $35.51 an hour. About 1,220 work in the metro. That is 43.4 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 20%) the local median is $33.00 an hour, which is 11% above the national $29.71. The middle half of them earn between $26.73 and $45.16 an hour. BLS counts 180 of them working in the area, 6.4 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($40.18 an hour) instead of the median, the labor line grows by about $310. At the 25th percentile ($28.64) it shrinks by about $110. The total moves by 3.9% or 1.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 281,410 jobs in the New Haven area. That makes it the 91st largest of the 300 metros we cover, with 0.18% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $28.64 | $31.61 | $40.18 | $29.12 | 1.09 | metro |
| Construction laborers (47-2061) | 40% | $23.36 | $29.02 | $35.51 | $22.66 | 1.28 | metro |
| Sheet metal workers (47-2211) | 20% | $26.73 | $33.00 | $45.16 | $29.71 | 1.11 | metro |
| Blended | 100% | 1.17 | |||||
Climate in New Haven: timing your aluminum fence job
We use NOAA's 1991-2020 climate normals for New Haven Tweed Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in New Haven (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
New Haven gets about 42 inches of precipitation in a normal year. The wettest months are April, September and October (4.2 inches in April). Inside the workable window, July and November are the driest, at 3.4 and 3.1 inches. The station averages about 6 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 38 | 23 | 2.7 | Cold |
| Feb | 40 | 24 | 2.8 | Cold |
| Mar | 47 | 30 | 3.7 | Workable |
| Apr | 58 | 39 | 4.2 | Workable |
| May | 68 | 49 | 3.5 | Workable |
| Jun | 76 | 59 | 3.5 | Workable |
| Jul | 82 | 66 | 3.4 | Workable |
| Aug | 81 | 65 | 3.5 | Workable |
| Sep | 75 | 57 | 4.0 | Workable |
| Oct | 64 | 46 | 3.8 | Workable |
| Nov | 53 | 36 | 3.1 | Workable |
| Dec | 44 | 29 | 3.5 | Cold |
Planning more than one job in New Haven?
Because every project leans on different trades, New Haven's wage level does not move all prices equally. Against the US midpoint, inground pool runs +13% and vinyl fence +2%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,600 – $9,400 | +2% |
| Wood fence | 150 linear ft | $3,250 – $8,050 | +5% |
| Chain-link fence | 150 linear ft | $1,650 – $6,950 | +11% |
| Inground pool | 450 sq ft | $40,800 – $127,000 | +13% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,350 to $9,500 for New Haven, CT is attached.
Take this estimate with you: PDF report, $9
Multi-page report for New Haven, CT: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in New Haven: your questions
+How much does it cost to install an aluminum fence in New Haven?
For 150 linear ft, expect $4,000 to $11,800 in the New Haven area. A standard-spec job lands at $6,350 to $9,500. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in New Haven?
About $26.50 to $78 per linear ft for materials and labor, plus $40 to $160 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in New Haven or Waterbury?
Waterbury is 20 miles away. The midpoint for 150 linear ft there is $7,700, which is 3% less than New Haven ($7,900). Wage and materials indexes both feed that gap.
+How much of the bill is labor in New Haven?
About 39% at the midpoint, or $3,050 out of $7,900. Materials are 60% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in New Haven?
$4,000 to $11,800. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in New Haven?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $160 for fees in the New Haven area (our national range of $40 to $150 scaled by the local price level).
+Is New Haven expensive for aluminum fence compared with the rest of Connecticut?
New Haven is 0% below the Connecticut statewide estimate ($7,900 at the midpoint). We cover 5 metros in Connecticut; see the state page to compare them.
+What do carpenters earn in New Haven?
The BLS median is $31.61 an hour in the New Haven area, compared with $29.12 nationally. The 25th to 75th percentile range is $28.64 to $40.18.
+What do basic and premium aluminum fence work cost in New Haven?
For 150 linear ft, basic work runs $4,000 to $7,150 and premium work $8,700 to $11,800. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in New Haven?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. July and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in New Haven?
$210 to $960, from a national range scaled by the local wage and goods indexes.
Aluminum fence near New Haven
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.