Vinyl fence cost in Rochester, NY
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,550 – $9,150
- Per linear ft
- $30 – $60
- before permit
- Versus US midpoint
- Level
- US $6,850
- Rank of 300 metros
- #79
- 1 = most expensive
Rochester homeowners pay roughly $4,550 to $9,150 to install a vinyl fence at 150 linear ft, or $30 to $60 per linear ft (permit not included). Against the US midpoint, Rochester is almost level. Carpenters earn a median of $28.60 an hour in the Rochester area, 2% below the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Rochester, NY, standard level
$5,900 to $7,750
About $39 to $51 per linear ft before permits. Labor is about 22% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,650 | $5,850 |
| Labor | $1,200 | $1,850 |
| Permits and fees | $70 | $110 |
| Total | $5,900 | $7,750 |
Cost breakdown for 150 linear ft in Rochester, NY
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,750 | $5,250 | $6,750 | 76% |
| Labor | $760 | $1,500 | $2,300 | 22% |
| Permits and fees | $40 | $90 | $150 | 1% |
| Total | $4,550 | $6,850 | $9,150 | 100% |
Why Rochester prices look the way they do
Labor is 22% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Rochester the blended ratio comes out at 1.01.
On the materials line, the BEA goods price index for the Rochester metro is 99.7 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,250, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (97.0) and land at $40 to $150.
Why two Rochester quotes can differ
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Cost by quality level and size in Rochester
Three bands are cut from the same cited range and localized for Rochester wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,550 to $6,400
4-ft picket or ranch rail
Standard
$5,900 to $7,750
6-ft privacy fence, standard white
Premium
$7,300 to $9,150
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,050 – $4,300 | $3,950 – $5,200 | $4,900 – $6,150 |
| 150 ft (150 linear ft) | $4,550 – $6,400 | $5,900 – $7,750 | $7,300 – $9,150 |
| 200 ft (200 linear ft) | $6,050 – $8,500 | $7,850 – $10,300 | $9,700 – $12,200 |
| full lot (300 linear ft) | $9,050 – $12,700 | $11,800 – $15,400 | $14,500 – $18,200 |
Rochester against nearby metros and the rest of New York
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,800 to $6,900 across Rochester and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Rochester, NYthis page | $4,550 – $9,150 | $6,850 | |
| Buffalo, NY60 miles | $4,550 – $9,250 | $6,900 | +1% |
| Syracuse, NY70 miles | $4,550 – $9,200 | $6,900 | level |
| Binghamton, NY105 miles | $4,550 – $9,250 | $6,900 | +1% |
| Utica, NY120 miles | $4,550 – $9,150 | $6,850 | level |
| Erie, PA150 miles | $4,550 – $9,100 | $6,800 | level |
| New York (statewide) | $4,950 – $10,100 | $7,500 | +10% |
| United States | $4,550 – $9,150 | $6,850 | level |
Across 300 US metros, Rochester comes in at #79 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Rochester is 9% below the New York figure.
Other New York metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New York, NY | 9,492,000 jobs | $5,150 – $10,500 | $7,800 | +14% |
| Buffalo, NY | 534,550 jobs | $4,550 – $9,250 | $6,900 | +1% |
| Albany, NY | 449,410 jobs | $4,600 – $9,250 | $6,900 | +1% |
| Syracuse, NY | 300,130 jobs | $4,550 – $9,200 | $6,900 | level |
| Poughkeepsie, NY | 268,970 jobs | $5,000 – $10,100 | $7,550 | +10% |
| Utica, NY | 118,390 jobs | $4,550 – $9,150 | $6,850 | level |
Cities with a workforce like Rochester's
Big cities and small ones price differently, so here is Rochester against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Omaha, NE | 498,100 jobs | $4,300 – $8,600 | $6,450 | −6% |
| Fresno, CA | 476,890 jobs | $4,800 – $9,750 | $7,300 | +6% |
| Birmingham, AL | 520,290 jobs | $4,250 – $8,500 | $6,400 | −7% |
| Tulsa, OK | 458,730 jobs | $4,200 – $8,350 | $6,300 | −8% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Rochester is 1.01 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $28.60 an hour, which is in line with the national $29.12. The middle half of them earn between $24.10 and $35.00 an hour. BLS counts 2,350 of them working in the area, 47.5 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 50% of the weighting: a median of $23.70 an hour, 5% above the US median of $22.66. The middle half of them earn between $19.93 and $30.93 an hour. About 2,550 work in the metro. That is 51.6 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($35.00 an hour) instead of the median, the labor line grows by about $160. At the 25th percentile ($24.10) it shrinks by about $120. The total moves by 2.4% or 1.7%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 494,280 jobs in the Rochester area. That makes it the 52nd largest of the 300 metros we cover, with 0.32% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $24.10 | $28.60 | $35.00 | $29.12 | 0.98 | metro |
| Construction laborers (47-2061) | 50% | $19.93 | $23.70 | $30.93 | $22.66 | 1.05 | metro |
| Blended | 100% | 1.01 | |||||
Extras that change the Rochester total
Extras are quoted nationally and then scaled to Rochester by the average of the local wage index (1.01) and goods index (1.00), a factor of 1.01. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $150 – $780 |
| Remove old fence | $1,500 – $3,000 |
Related projects, priced for Rochester
Because every project leans on different trades, Rochester's wage level does not move all prices equally. Against the US midpoint, concrete slab runs +3% and wood fence level.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,050 – $7,650 | level |
| Chain-link fence | 150 linear ft | $1,550 – $6,200 | +1% |
| Aluminum fence | 150 linear ft | $3,800 – $11,400 | level |
| Concrete slab | 400 sq ft | $2,550 – $5,300 | +3% |
When to schedule vinyl fence in Rochester
We use NOAA's 1991-2020 climate normals for Rochester Gtr Intl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
April through November is the stretch where exterior installation runs into the fewest weather problems in Rochester (8 of 12 months). January, February, March and December have an average daytime high under 45°F.
In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Rochester gets about 35 inches of precipitation in a normal year, including roughly 102 inches of snow. The wettest months are June, July and August (3.6 inches in July). Inside the workable window, May and November are the driest, at 2.9 and 2.8 inches. The station averages about 8 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 33 | 19 | 2.5 | Cold |
| Feb | 35 | 20 | 2.1 | Cold |
| Mar | 44 | 27 | 2.5 | Cold |
| Apr | 57 | 37 | 3.0 | Workable |
| May | 69 | 48 | 2.9 | Workable |
| Jun | 78 | 57 | 3.4 | Workable |
| Jul | 83 | 62 | 3.6 | Workable |
| Aug | 81 | 61 | 3.3 | Workable |
| Sep | 74 | 54 | 3.2 | Workable |
| Oct | 61 | 43 | 3.2 | Workable |
| Nov | 49 | 34 | 2.8 | Workable |
| Dec | 39 | 25 | 2.7 | Cold |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,900 to $7,750 for Rochester, NY is attached.
Take this estimate with you: PDF report, $9
The report lays out the vinyl fence numbers for Rochester, NY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Rochester: your questions
+How much does it cost to install a vinyl fence in Rochester?
For 150 linear ft, expect $4,550 to $9,150 in the Rochester area. A standard-spec job lands at $5,900 to $7,750. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Rochester?
About $30 to $60 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Rochester or Buffalo?
Buffalo is 60 miles away. The midpoint for 150 linear ft there is $6,900, which is 1% more than Rochester ($6,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Rochester?
About 22% at the midpoint, or $1,500 out of $6,850. Materials are 76% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Rochester?
$6,050 to $12,200. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Rochester?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Rochester area (our national range of $40 to $150 scaled by the local price level).
+Is Rochester expensive for vinyl fence compared with the rest of New York?
Rochester is 9% below the New York statewide estimate ($7,500 at the midpoint). We cover 9 metros in New York; see the state page to compare them.
+What do carpenters earn in Rochester?
The BLS median is $28.60 an hour in the Rochester area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.10 to $35.00.
+What do basic and premium vinyl fence work cost in Rochester?
For 150 linear ft, basic work runs $4,550 to $6,400 and premium work $7,300 to $9,150. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Rochester?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. May and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Rochester?
$150 to $780, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Rochester
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.