Vinyl fence cost in Champaign, IL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,450 – $9,100
- Per linear ft
- $29.50 – $60
- before permit
- Versus US midpoint
- −1%
- US $6,850
- Rank of 300 metros
- #95
- 1 = most expensive
Local price for a vinyl fence in the Champaign area: $4,450 to $9,100 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.6).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Champaign, IL, standard level
$5,850 to $7,700
About $38.50 to $50.50 per linear ft before permits. Labor is about 26% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $1,400 | $2,150 |
| Permits and fees | $70 | $110 |
| Total | $5,850 | $7,700 |
Cost breakdown for 150 linear ft in Champaign, IL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,500 | $4,900 | $6,300 | 73% |
| Labor | $890 | $1,800 | $2,650 | 26% |
| Permits and fees | $35 | $90 | $140 | 1% |
| Total | $4,450 | $6,800 | $9,100 | 100% |
Where the Champaign price comes from
Labor is 26% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Champaign the blended ratio comes out at 1.18.
Materials are scaled with BEA's regional price parity for goods. Champaign is at 93.6 against 100 for the US, so a materials line of $5,250 nationally becomes $4,900 here (midpoint, 150 linear ft). Permits follow the all-items index of 92.7: $35 to $140.
Is Champaign cheap or dear? The local comparison
Of the five closest metros, 2 are cheaper than Champaign. Terre Haute is the lowest at about $6,500 (midpoint, 150 linear ft), 75 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Champaign, ILthis page | $4,450 – $9,100 | $6,800 | |
| Bloomington, IL35 miles | $4,500 – $9,300 | $6,900 | +2% |
| Lafayette, IN70 miles | $4,350 – $8,850 | $6,600 | −2% |
| Peoria, IL75 miles | $4,500 – $9,350 | $6,950 | +2% |
| Terre Haute, IN75 miles | $4,300 – $8,700 | $6,500 | −4% |
| Springfield, IL80 miles | $4,500 – $9,350 | $6,950 | +2% |
| Illinois (statewide) | $4,900 – $10,100 | $7,500 | +10% |
| United States | $4,550 – $9,150 | $6,850 | +1% |
Out of the 300 metros we cover, Champaign ranks #95 for the cost of this job (#1 is the most expensive). Statewide, Champaign is 9% below the Illinois figure.
Elsewhere in Illinois
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Chicago, IL | 4,513,280 jobs | $5,050 – $10,300 | $7,700 | +13% |
| Peoria, IL | 166,020 jobs | $4,500 – $9,350 | $6,950 | +2% |
| Rockford, IL | 137,650 jobs | $4,450 – $9,200 | $6,850 | +1% |
| Springfield, IL | 100,810 jobs | $4,500 – $9,350 | $6,950 | +2% |
| Bloomington, IL | 88,110 jobs | $4,500 – $9,300 | $6,900 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Champaign against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Hagerstown, MD | 107,170 jobs | $4,350 – $8,700 | $6,550 | −4% |
| St. Cloud, MN | 103,920 jobs | $4,450 – $9,100 | $6,750 | level |
| Columbia, MO | 107,680 jobs | $4,350 – $8,900 | $6,650 | −2% |
| Gainesville, GA | 103,870 jobs | $4,250 – $8,400 | $6,350 | −7% |
Related projects, priced for Champaign
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Champaign wage and price inputs. Compared with national midpoints, chain-link fence comes out highest (+10%) and wood fence lowest (+3%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,200 – $7,850 | +3% |
| Chain-link fence | 150 linear ft | $1,600 – $6,800 | +10% |
| Aluminum fence | 150 linear ft | $4,000 – $11,800 | +4% |
| Concrete slab | 400 sq ft | $2,750 – $5,600 | +9% |
Optional extras in Champaign
Add-ons start from national price ranges and are scaled by 1.06 for Champaign, which is the average of the area's wage index (1.18) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $160 – $830 |
| Remove old fence | $1,600 – $3,200 |
The best months for vinyl fence in Champaign
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Champaign Willard Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Champaign are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Champaign gets about 37 inches of precipitation in a normal year. The wettest months are May, June and July (4.4 inches in May). Inside the workable window, March and November are the driest, at 2.6 and 2.9 inches. The station averages about 22 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 34 | 18 | 2.1 | Cold |
| Feb | 39 | 22 | 1.8 | Cold |
| Mar | 52 | 31 | 2.6 | Workable |
| Apr | 65 | 41 | 3.7 | Workable |
| May | 76 | 52 | 4.4 | Workable |
| Jun | 84 | 62 | 4.3 | Workable |
| Jul | 85 | 64 | 3.9 | Workable |
| Aug | 84 | 62 | 3.1 | Workable |
| Sep | 79 | 55 | 3.0 | Workable |
| Oct | 67 | 43 | 3.0 | Workable |
| Nov | 52 | 32 | 2.9 | Workable |
| Dec | 39 | 24 | 2.1 | Cold |
Specs and site conditions that change a Champaign bid
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Who does the work: Champaign trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Champaign the blend is 1.18.
Carpenters (47-2031), 50% of the weighting: a median of $32.20 an hour, 11% above the US median of $29.12. The middle half of them earn between $24.37 and $42.23 an hour. About 310 work in the metro. That is 29.4 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $28.59 an hour, which is 26% above the national $22.66. The middle half of them earn between $21.95 and $36.74 an hour. BLS counts 570 of them working in the area, 54.0 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $260 to the midpoint estimate; the 25th percentile takes off about $200. That is a swing of roughly 3.0% to 3.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Champaign-Urbana has 105,500 jobs in total (BLS, May 2025), ranking 196th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $24.37 | $32.20 | $42.23 | $29.12 | 1.11 | metro |
| Construction laborers (47-2061) | 50% | $21.95 | $28.59 | $36.74 | $22.66 | 1.26 | metro |
| Blended | 100% | 1.18 | |||||
Champaign: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Champaign. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,450 to $6,300
4-ft picket or ranch rail
Standard
$5,850 to $7,700
6-ft privacy fence, standard white
Premium
$7,250 to $9,100
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,950 – $4,250 | $3,900 – $5,200 | $4,850 – $6,150 |
| 150 ft (150 linear ft) | $4,450 – $6,300 | $5,850 – $7,700 | $7,250 – $9,100 |
| 200 ft (200 linear ft) | $5,900 – $8,400 | $7,750 – $10,300 | $9,650 – $12,100 |
| full lot (300 linear ft) | $8,850 – $12,500 | $11,600 – $15,300 | $14,400 – $18,100 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,850 to $7,700 for Champaign, IL is attached.
Detailed vinyl fence report for Champaign, IL, $9
The report lays out the vinyl fence numbers for Champaign, IL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Champaign: your questions
+How much does it cost to install a vinyl fence in Champaign?
For 150 linear ft, expect $4,450 to $9,100 in the Champaign area. A standard-spec job lands at $5,850 to $7,700. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Champaign?
About $29.50 to $60 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Champaign or Bloomington?
Bloomington is 35 miles away. The midpoint for 150 linear ft there is $6,900, which is 2% more than Champaign ($6,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Champaign?
About 26% at the midpoint, or $1,800 out of $6,800. Materials are 73% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Champaign?
$5,900 to $12,100. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Champaign?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Champaign area (our national range of $40 to $150 scaled by the local price level).
+Is Champaign expensive for vinyl fence compared with the rest of Illinois?
Champaign is 9% below the Illinois statewide estimate ($7,500 at the midpoint). We cover 6 metros in Illinois; see the state page to compare them.
+What do carpenters earn in Champaign?
The BLS median is $32.20 an hour in the Champaign area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.37 to $42.23.
+What do basic and premium vinyl fence work cost in Champaign?
For 150 linear ft, basic work runs $4,450 to $6,300 and premium work $7,250 to $9,100. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Champaign?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Champaign?
$160 to $830, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Champaign
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.