Vinyl fence cost in Rockford, IL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,450 – $9,200
- Per linear ft
- $29.50 – $60.50
- before permit
- Versus US midpoint
- Level
- US $6,850
- Rank of 300 metros
- #82
- 1 = most expensive
Local price for a vinyl fence in the Rockford area: $4,450 to $9,200 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.6).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Rockford, IL, standard level
$5,900 to $7,800
About $39 to $51 per linear ft before permits. Labor is about 27% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $1,450 | $2,200 |
| Permits and fees | $65 | $110 |
| Total | $5,900 | $7,800 |
Cost breakdown for 150 linear ft in Rockford, IL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,500 | $4,900 | $6,300 | 72% |
| Labor | $920 | $1,850 | $2,750 | 27% |
| Permits and fees | $35 | $90 | $140 | 1% |
| Total | $4,450 | $6,850 | $9,200 | 100% |
What is behind the Rockford number
Labor is 27% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Rockford the blended ratio comes out at 1.22.
Materials are scaled with BEA's regional price parity for goods. Rockford is at 93.6 against 100 for the US, so a materials line of $5,250 nationally becomes $4,900 here (midpoint, 150 linear ft). Permits follow the all-items index of 92.2: $35 to $140.
The best months for vinyl fence in Rockford
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Rockford Gtr Rockford Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Rockford are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Rockford gets about 37 inches of precipitation in a normal year, including roughly 37 inches of snow. The wettest months are May, June and August (5.2 inches in June). Inside the workable window, March and November are the driest, at 2.4 and 2.3 inches. The station averages about 15 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 29 | 15 | 1.6 | Cold |
| Feb | 33 | 18 | 1.6 | Cold |
| Mar | 47 | 28 | 2.4 | Workable |
| Apr | 60 | 39 | 3.8 | Workable |
| May | 71 | 50 | 4.2 | Workable |
| Jun | 81 | 60 | 5.2 | Workable |
| Jul | 84 | 64 | 3.8 | Workable |
| Aug | 82 | 62 | 4.2 | Workable |
| Sep | 75 | 54 | 3.6 | Workable |
| Oct | 62 | 42 | 2.6 | Workable |
| Nov | 47 | 31 | 2.3 | Workable |
| Dec | 34 | 20 | 1.9 | Cold |
Planning more than one job in Rockford?
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Rockford wage and price inputs. Compared with national midpoints, chain-link fence comes out highest (+11%) and aluminum fence lowest (+4%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,250 – $8,000 | +5% |
| Chain-link fence | 150 linear ft | $1,600 – $6,900 | +11% |
| Aluminum fence | 150 linear ft | $4,000 – $11,800 | +4% |
| Concrete slab | 400 sq ft | $2,750 – $5,600 | +9% |
Why two Rockford quotes can differ
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Optional extras in Rockford
Add-ons start from national price ranges and are scaled by 1.08 for Rockford, which is the average of the area's wage index (1.22) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $160 – $840 |
| Remove old fence | $1,600 – $3,250 |
Who does the work: Rockford trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Rockford the blend is 1.22.
Carpenters (47-2031), 50% of the weighting: a median of $34.99 an hour, 20% above the US median of $29.12. The middle half of them earn between $27.33 and $47.16 an hour. About 810 work in the metro. That is 58.8 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $28.07 an hour, which is 24% above the national $22.66. The middle half of them earn between $22.55 and $38.91 an hour. BLS counts 830 of them working in the area, 60.3 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $310 to the midpoint estimate; the 25th percentile takes off about $200. That is a swing of roughly 2.9% to 4.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Rockford has 137,650 jobs in total (BLS, May 2025), ranking 161st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $27.33 | $34.99 | $47.16 | $29.12 | 1.20 | metro |
| Construction laborers (47-2061) | 50% | $22.55 | $28.07 | $38.91 | $22.66 | 1.24 | metro |
| Blended | 100% | 1.22 | |||||
Is Rockford cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. Kenosha is the priciest of the group at $7,200. Racine is the cheapest at $6,650.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Rockford, ILthis page | $4,450 – $9,200 | $6,850 | |
| Janesville, WI25 miles | $4,450 – $9,200 | $6,850 | level |
| Madison, WI60 miles | $4,400 – $9,000 | $6,700 | −2% |
| Kenosha, WI60 miles | $4,800 – $9,650 | $7,200 | +6% |
| Racine, WI70 miles | $4,350 – $8,900 | $6,650 | −3% |
| Milwaukee, WI70 miles | $4,400 – $9,050 | $6,700 | −2% |
| Illinois (statewide) | $4,900 – $10,100 | $7,500 | +10% |
| United States | $4,550 – $9,150 | $6,850 | level |
Out of the 300 metros we cover, Rockford ranks #82 for the cost of this job (#1 is the most expensive). Statewide, Rockford is 9% below the Illinois figure.
Elsewhere in Illinois
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Chicago, IL | 4,513,280 jobs | $5,050 – $10,300 | $7,700 | +13% |
| Peoria, IL | 166,020 jobs | $4,500 – $9,350 | $6,950 | +2% |
| Champaign, IL | 105,500 jobs | $4,450 – $9,100 | $6,800 | −1% |
| Springfield, IL | 100,810 jobs | $4,500 – $9,350 | $6,950 | +1% |
| Bloomington, IL | 88,110 jobs | $4,500 – $9,300 | $6,900 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Rockford against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Cedar Rapids, IA | 139,260 jobs | $4,300 – $8,700 | $6,500 | −5% |
| Evansville, IN | 135,250 jobs | $4,400 – $9,000 | $6,700 | −2% |
| Huntington, WV | 140,740 jobs | $4,350 – $8,700 | $6,500 | −5% |
| Flint, MI | 135,040 jobs | $4,400 – $8,950 | $6,700 | −2% |
Rockford: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Rockford. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,450 to $6,350
4-ft picket or ranch rail
Standard
$5,900 to $7,800
6-ft privacy fence, standard white
Premium
$7,300 to $9,200
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,000 – $4,250 | $3,950 – $5,200 | $4,900 – $6,200 |
| 150 ft (150 linear ft) | $4,450 – $6,350 | $5,900 – $7,800 | $7,300 – $9,200 |
| 200 ft (200 linear ft) | $5,950 – $8,450 | $7,850 – $10,300 | $9,700 – $12,200 |
| full lot (300 linear ft) | $8,900 – $12,600 | $11,700 – $15,500 | $14,500 – $18,300 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,900 to $7,800 for Rockford, IL is attached.
Detailed vinyl fence report for Rockford, IL, $9
The report lays out the vinyl fence numbers for Rockford, IL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Rockford: your questions
+How much does it cost to install a vinyl fence in Rockford?
For 150 linear ft, expect $4,450 to $9,200 in the Rockford area. A standard-spec job lands at $5,900 to $7,800. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Rockford?
About $29.50 to $60.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Rockford or Janesville?
Janesville is 25 miles away. The midpoint for 150 linear ft there is $6,850, which is 0% less than Rockford ($6,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Rockford?
About 27% at the midpoint, or $1,850 out of $6,850. Materials are 72% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Rockford?
$5,950 to $12,200. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Rockford?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Rockford area (our national range of $40 to $150 scaled by the local price level).
+Is Rockford expensive for vinyl fence compared with the rest of Illinois?
Rockford is 9% below the Illinois statewide estimate ($7,500 at the midpoint). We cover 6 metros in Illinois; see the state page to compare them.
+What do carpenters earn in Rockford?
The BLS median is $34.99 an hour in the Rockford area, compared with $29.12 nationally. The 25th to 75th percentile range is $27.33 to $47.16.
+What do basic and premium vinyl fence work cost in Rockford?
For 150 linear ft, basic work runs $4,450 to $6,350 and premium work $7,300 to $9,200. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Rockford?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Rockford?
$160 to $840, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Rockford
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.