Skip to content
CostLocal

Vinyl fence cost in Springfield, IL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$4,500 – $9,350
Per linear ft
$30 – $61.50
before permit
Versus US midpoint
+1%
US $6,850
Rank of 300 metros
#60
1 = most expensive

Springfield homeowners pay roughly $4,500 to $9,350 to install a vinyl fence at 150 linear ft, or $30 to $61.50 per linear ft (permit not included). Against the US midpoint, Springfield is almost level. Carpenters earn a median of $37.01 an hour in the Springfield area, 27% above the US median of $29.12.

Estimate your vinyl fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

6-ft privacy fence, standard white

Add-ons

Estimated cost for 150 linear ft in Springfield, IL, standard level

$5,950 to $7,900

About $39.50 to $52 per linear ft before permits. Labor is about 28% of the bill.

Cost breakdown
PartLowHigh
Materials$4,350$5,500
Labor$1,550$2,300
Permits and fees$70$110
Total$5,950$7,900
Save and get a PDF report

Cost breakdown for 150 linear ft in Springfield, IL

Part of the jobLowMidpointHighShare
Materials$3,500$4,900$6,30071%
Labor$970$1,950$2,90028%
Permits and fees$35$90$1401%
Total$4,500$6,950$9,350100%

Where the Springfield price comes from

We price the labor side from BLS wage data for 2 trades: carpenters at 50%, construction laborers at 50%. Weighted together, Springfield wages are 1.29 times the national level. Labor makes up about 28% of the midpoint estimate (22% at national prices).

On the materials line, the BEA goods price index for the Springfield metro is 93.6 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,900, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (92.7) and land at $35 to $140.

Springfield against nearby metros and the rest of Illinois

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,650 to $7,250 across Springfield and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Springfield, ILthis page$4,500 – $9,350$6,950
Bloomington, IL65 miles$4,500 – $9,300$6,900level
Peoria, IL65 miles$4,500 – $9,350$6,950level
Champaign, IL80 miles$4,450 – $9,100$6,800−2%
St. Louis, MO85 miles$4,750 – $9,750$7,250+4%
Davenport, IA115 miles$4,350 – $8,900$6,650−4%
Illinois (statewide)$4,900 – $10,100$7,500+8%
United States$4,550 – $9,150$6,850−1%

Across 300 US metros, Springfield comes in at #60 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Springfield is 7% below the Illinois figure.

Other Illinois metros

Illinois metros compared with Springfield
MetroSizeRangeMidpointvs. here
Chicago, IL4,513,280 jobs$5,050 – $10,300$7,700+11%
Peoria, IL166,020 jobs$4,500 – $9,350$6,950level
Rockford, IL137,650 jobs$4,450 – $9,200$6,850−1%
Champaign, IL105,500 jobs$4,450 – $9,100$6,800−2%
Bloomington, IL88,110 jobs$4,500 – $9,300$6,900level

Cities with a workforce like Springfield's

Big cities and small ones price differently, so here is Springfield against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Lake Charles, LA101,690 jobs$4,200 – $8,400$6,300−9%
Santa Cruz, CA98,500 jobs$4,950 – $10,100$7,500+8%
Lafayette, IN102,200 jobs$4,350 – $8,850$6,600−5%
Slidell, LA98,240 jobs$4,150 – $8,250$6,200−10%

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Springfield is 1.29 times the national level.

For carpenters (47-2031, weighted 50%) the local median is $37.01 an hour, which is 27% above the national $29.12. The middle half of them earn between $26.51 and $39.67 an hour. BLS counts 290 of them working in the area, 28.8 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Construction laborers (47-2061), 50% of the weighting: a median of $29.52 an hour, 30% above the US median of $22.66. The middle half of them earn between $21.56 and $35.79 an hour. About 510 work in the metro. That is 50.6 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($39.67 an hour) instead of the median, the labor line grows by about $70. At the 25th percentile ($26.51) it shrinks by about $270. The total moves by 1.0% or 3.9%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 100,810 jobs in the Springfield area. That makes it the 203rd largest of the 300 metros we cover, with 0.06% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)50%$26.51$37.01$39.67$29.121.27metro
Construction laborers (47-2061)50%$21.56$29.52$35.79$22.661.30metro
Blended100%1.29

What nearby projects cost in Springfield

Because every project leans on different trades, Springfield's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +15% and concrete slab +6%.

Related projects with local prices
ProjectSizeRangevs. US
Wood fence150 linear ft$3,350 – $8,200+8%
Chain-link fence150 linear ft$1,650 – $7,200+15%
Aluminum fence150 linear ft$4,150 – $12,100+7%
Concrete slab400 sq ft$2,650 – $5,450+6%

Vinyl fence: what moves the price in Springfield

  • Permit

    Fence permits run $40-$150 depending on location.

  • Type and height

    A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).

  • Gates

    A vinyl gate costs $150-$780 installed, more for large or complex ones.

Add-ons priced for Springfield

Extras are quoted nationally and then scaled to Springfield by the average of the local wage index (1.29) and goods index (0.94), a factor of 1.11. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add one gate (flat)$170 – $870
Remove old fence$1,650 – $3,350

When to schedule vinyl fence in Springfield

We use NOAA's 1991-2020 climate normals for Springfield #2 (5 miles from the city center). These are 30-year monthly averages, not forecasts.

March through November is the stretch where exterior installation runs into the fewest weather problems in Springfield (9 of 12 months). January, February and December have an average daytime high under 45°F.

In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Springfield gets about 40 inches of precipitation in a normal year. The wettest months are May, June and July (5.1 inches in May). Inside the workable window, March and August are the driest, at 3.0 and 2.9 inches. The station averages about 23 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Springfield #2 (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan36192.2Cold
Feb41222.2Cold
Mar52313.0Workable
Apr65414.1Workable
May74535.1Workable
Jun83635.0Workable
Jul86664.4Workable
Aug84642.9Workable
Sep78563.1Workable
Oct66443.1Workable
Nov53333.1Workable
Dec41242.3Cold

Springfield: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Springfield wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$4,500 to $6,450

4-ft picket or ranch rail

Standard

$5,950 to $7,900

6-ft privacy fence, standard white

Premium

$7,400 to $9,350

Tall or colored privacy, many corners and gates

Cost by size and quality level
SizeBasicStandardPremium
backyard (100 linear ft)$3,000 – $4,350$4,000 – $5,300$5,000 – $6,300
150 ft (150 linear ft)$4,500 – $6,450$5,950 – $7,900$7,400 – $9,350
200 ft (200 linear ft)$6,000 – $8,550$7,950 – $10,500$9,850 – $12,400
full lot (300 linear ft)$9,000 – $12,800$11,900 – $15,700$14,700 – $18,600

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,950 to $7,900 for Springfield, IL is attached.

Detailed vinyl fence report for Springfield, IL, $9

The report lays out the vinyl fence numbers for Springfield, IL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Vinyl fence in Springfield: your questions

+How much does it cost to install a vinyl fence in Springfield?

For 150 linear ft, expect $4,500 to $9,350 in the Springfield area. A standard-spec job lands at $5,950 to $7,900. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for vinyl fence in Springfield?

About $30 to $61.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.

+Is vinyl fence cheaper in Springfield or Bloomington?

Bloomington is 65 miles away. The midpoint for 150 linear ft there is $6,900, which is 0% less than Springfield ($6,950). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Springfield?

About 28% at the midpoint, or $1,950 out of $6,950. Materials are 71% and permits 1%. Nationally, labor is 22%.

+What would 200 ft (200 linear ft) cost in Springfield?

$6,000 to $12,400. Pick a different size in the estimator above to get your own number.

+Does vinyl fence need a permit in Springfield?

Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Springfield area (our national range of $40 to $150 scaled by the local price level).

+Is Springfield expensive for vinyl fence compared with the rest of Illinois?

Springfield is 7% below the Illinois statewide estimate ($7,500 at the midpoint). We cover 6 metros in Illinois; see the state page to compare them.

+What do carpenters earn in Springfield?

The BLS median is $37.01 an hour in the Springfield area, compared with $29.12 nationally. The 25th to 75th percentile range is $26.51 to $39.67.

+What do basic and premium vinyl fence work cost in Springfield?

For 150 linear ft, basic work runs $4,500 to $6,450 and premium work $7,400 to $9,350. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.

+When is the best time to install a vinyl fence in Springfield?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and August are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Springfield?

$170 to $870, from a national range scaled by the local wage and goods indexes.

Vinyl fence near Springfield

Vinyl fence: all pricesVinyl fence in IllinoisAll projects in SpringfieldIllinois cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.