Vinyl fence cost in Lake Charles, LA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,200 – $8,400
- Per linear ft
- $27.50 – $55
- before permit
- Versus US midpoint
- −8%
- US $6,850
- Rank of 300 metros
- #266
- 1 = most expensive
Local price for a vinyl fence in the Lake Charles area: $4,200 to $8,400 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 8% lower than the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.7).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Lake Charles, LA, standard level
$5,450 to $7,150
About $36 to $47 per linear ft before permits. Labor is about 20% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $1,050 | $1,550 |
| Permits and fees | $65 | $100 |
| Total | $5,450 | $7,150 |
Cost breakdown for 150 linear ft in Lake Charles, LA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,500 | $4,900 | $6,300 | 78% |
| Labor | $640 | $1,300 | $1,950 | 20% |
| Permits and fees | $35 | $80 | $130 | 1% |
| Total | $4,200 | $6,300 | $8,400 | 100% |
What is behind the Lake Charles number
Labor is 20% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Lake Charles the blended ratio comes out at 0.86.
Materials are scaled with BEA's regional price parity for goods. Lake Charles is at 93.7 against 100 for the US, so a materials line of $5,250 nationally becomes $4,900 here (midpoint, 150 linear ft). Permits follow the all-items index of 85.9: $35 to $130.
Lake Charles against nearby metros and the rest of Louisiana
Of the five closest metros, 2 are cheaper than Lake Charles. Alexandria is the lowest at about $6,150 (midpoint, 150 linear ft), 95 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Lake Charles, LAthis page | $4,200 – $8,400 | $6,300 | |
| Beaumont, TX60 miles | $4,250 – $8,600 | $6,450 | +2% |
| Lafayette, LA65 miles | $4,150 – $8,250 | $6,200 | −1% |
| Alexandria, LA95 miles | $4,150 – $8,200 | $6,150 | −2% |
| Baton Rouge, LA125 miles | $4,200 – $8,400 | $6,300 | level |
| Houston, TX130 miles | $4,450 – $8,850 | $6,650 | +6% |
| Louisiana (statewide) | $4,150 – $8,300 | $6,250 | −1% |
| United States | $4,550 – $9,150 | $6,850 | +9% |
Out of the 300 metros we cover, Lake Charles ranks #266 for the cost of this job (#1 is the most expensive). Statewide, Lake Charles is 1% above the Louisiana figure.
Elsewhere in Louisiana
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New Orleans, LA | 445,550 jobs | $4,150 – $8,350 | $6,250 | −1% |
| Baton Rouge, LA | 409,690 jobs | $4,200 – $8,400 | $6,300 | level |
| Lafayette, LA | 179,570 jobs | $4,150 – $8,250 | $6,200 | −1% |
| Shreveport, LA | 162,750 jobs | $4,150 – $8,250 | $6,200 | −2% |
| Slidell, LA | 98,240 jobs | $4,150 – $8,250 | $6,200 | −1% |
| Monroe, LA | 87,500 jobs | $4,150 – $8,200 | $6,150 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Lake Charles against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lafayette, IN | 102,200 jobs | $4,350 – $8,850 | $6,600 | +5% |
| Springfield, IL | 100,810 jobs | $4,500 – $9,350 | $6,950 | +10% |
| Clarksville, TN | 103,220 jobs | $4,300 – $8,550 | $6,400 | +2% |
| Santa Cruz, CA | 98,500 jobs | $4,950 – $10,100 | $7,500 | +20% |
The best months for vinyl fence in Lake Charles
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Lake Charles (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Lake Charles are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Lake Charles gets about 60 inches of precipitation in a normal year. The wettest months are January, June and August (6.5 inches in June). Inside the workable window, February and March are the driest, at 3.3 and 3.7 inches. The station averages about 88 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 63 | 43 | 5.9 | Workable |
| Feb | 67 | 47 | 3.3 | Workable |
| Mar | 73 | 53 | 3.7 | Workable |
| Apr | 79 | 59 | 4.4 | Workable |
| May | 85 | 67 | 5.4 | Workable |
| Jun | 91 | 74 | 6.5 | Hot |
| Jul | 92 | 76 | 5.7 | Hot |
| Aug | 93 | 75 | 6.2 | Hot |
| Sep | 89 | 71 | 5.2 | Workable |
| Oct | 82 | 60 | 4.8 | Workable |
| Nov | 72 | 51 | 4.1 | Workable |
| Dec | 65 | 45 | 4.6 | Workable |
Add-ons priced for Lake Charles
Add-ons start from national price ranges and are scaled by 0.90 for Lake Charles, which is the average of the area's wage index (0.86) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $130 – $700 |
| Remove old fence | $1,350 – $2,700 |
What nearby projects cost in Lake Charles
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Lake Charles wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−9%) and wood fence lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,700 – $6,850 | −11% |
| Chain-link fence | 150 linear ft | $1,400 – $5,500 | −10% |
| Aluminum fence | 150 linear ft | $3,450 – $10,400 | −9% |
| Concrete slab | 400 sq ft | $2,200 – $4,700 | −9% |
Cost by quality level and size in Lake Charles
The cited range is split into basic, standard and premium bands, then scaled to Lake Charles. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,200 to $5,850
4-ft picket or ranch rail
Standard
$5,450 to $7,150
6-ft privacy fence, standard white
Premium
$6,700 to $8,400
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,800 – $3,950 | $3,650 – $4,800 | $4,500 – $5,650 |
| 150 ft (150 linear ft) | $4,200 – $5,850 | $5,450 – $7,150 | $6,700 – $8,400 |
| 200 ft (200 linear ft) | $5,600 – $7,800 | $7,250 – $9,450 | $8,900 – $11,100 |
| full lot (300 linear ft) | $8,350 – $11,700 | $10,800 – $14,200 | $13,300 – $16,600 |
Who does the work: Lake Charles trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Lake Charles the blend is 0.86.
Carpenters (47-2031), 50% of the weighting: a median of $22.08 an hour, 24% below the US median of $29.12. The middle half of them earn between $16.13 and $28.48 an hour. About 630 work in the metro. That is 62.0 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $21.75 an hour, which is 4% below the national $22.66. The middle half of them earn between $17.37 and $25.18 an hour. BLS counts 2,130 of them working in the area, 209.5 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $160 to the midpoint estimate; the 25th percentile takes off about $150. That is a swing of roughly 2.4% to 2.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Lake Charles has 101,690 jobs in total (BLS, May 2025), ranking 202nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $16.13 | $22.08 | $28.48 | $29.12 | 0.76 | metro |
| Construction laborers (47-2061) | 50% | $17.37 | $21.75 | $25.18 | $22.66 | 0.96 | metro |
| Blended | 100% | 0.86 | |||||
Vinyl fence: what moves the price in Lake Charles
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,450 to $7,150 for Lake Charles, LA is attached.
Detailed vinyl fence report for Lake Charles, LA, $9
Multi-page report for Lake Charles, LA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Lake Charles: your questions
+How much does it cost to install a vinyl fence in Lake Charles?
For 150 linear ft, expect $4,200 to $8,400 in the Lake Charles area. A standard-spec job lands at $5,450 to $7,150. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Lake Charles?
About $27.50 to $55 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Lake Charles or Beaumont?
Beaumont is 60 miles away. The midpoint for 150 linear ft there is $6,450, which is 2% more than Lake Charles ($6,300). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Lake Charles?
About 20% at the midpoint, or $1,300 out of $6,300. Materials are 78% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Lake Charles?
$5,600 to $11,100. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Lake Charles?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Lake Charles area (our national range of $40 to $150 scaled by the local price level).
+Is Lake Charles expensive for vinyl fence compared with the rest of Louisiana?
Lake Charles is 1% above the Louisiana statewide estimate ($6,250 at the midpoint). We cover 9 metros in Louisiana; see the state page to compare them.
+What do carpenters earn in Lake Charles?
The BLS median is $22.08 an hour in the Lake Charles area, compared with $29.12 nationally. The 25th to 75th percentile range is $16.13 to $28.48.
+What do basic and premium vinyl fence work cost in Lake Charles?
For 150 linear ft, basic work runs $4,200 to $5,850 and premium work $6,700 to $8,400. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Lake Charles?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. February and March are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Lake Charles?
$130 to $700, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Lake Charles
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.