Vinyl fence cost in Baton Rouge, LA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,200 – $8,400
- Per linear ft
- $28 – $55
- before permit
- Versus US midpoint
- −8%
- US $6,850
- Rank of 300 metros
- #261
- 1 = most expensive
Baton Rouge homeowners pay roughly $4,200 to $8,400 to install a vinyl fence at 150 linear ft, or $28 to $55 per linear ft (permit not included). Against the US midpoint, Baton Rouge is 8% lower. Building materials run about 6% below the US average here (BEA goods price index 93.7).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Baton Rouge, LA, standard level
$5,450 to $7,150
About $36 to $47 per linear ft before permits. Labor is about 21% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,350 | $5,500 |
| Labor | $1,050 | $1,550 |
| Permits and fees | $65 | $110 |
| Total | $5,450 | $7,150 |
Cost breakdown for 150 linear ft in Baton Rouge, LA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,500 | $4,900 | $6,300 | 78% |
| Labor | $650 | $1,300 | $1,950 | 21% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $4,200 | $6,300 | $8,400 | 100% |
Why Baton Rouge prices look the way they do
Labor is 21% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Baton Rouge the blended ratio comes out at 0.87.
On the materials line, the BEA goods price index for the Baton Rouge metro is 93.7 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,900, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (90.8) and land at $35 to $140.
Specs and site conditions that change a Baton Rouge bid
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Baton Rouge is 0.87 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $26.75 an hour, which is 8% below the national $29.12. The middle half of them earn between $23.20 and $29.27 an hour. BLS counts 3,490 of them working in the area, 85.2 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 50% of the weighting: a median of $18.58 an hour, 18% below the US median of $22.66. The middle half of them earn between $16.59 and $22.72 an hour. About 6,300 work in the metro. That is 153.8 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($29.27 an hour) instead of the median, the labor line grows by about $65. At the 25th percentile ($23.20) it shrinks by about $90. The total moves by 1.0% or 1.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 409,690 jobs in the Baton Rouge area. That makes it the 60th largest of the 300 metros we cover, with 0.26% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $23.20 | $26.75 | $29.27 | $29.12 | 0.92 | metro |
| Construction laborers (47-2061) | 50% | $16.59 | $18.58 | $22.72 | $22.66 | 0.82 | metro |
| Blended | 100% | 0.87 | |||||
Optional extras in Baton Rouge
Extras are quoted nationally and then scaled to Baton Rouge by the average of the local wage index (0.87) and goods index (0.94), a factor of 0.90. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $700 |
| Remove old fence | $1,350 – $2,700 |
Is Baton Rouge cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. Baton Rouge is the priciest of the group. Alexandria is the cheapest at $6,150.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Baton Rouge, LAthis page | $4,200 – $8,400 | $6,300 | |
| Lafayette, LA70 miles | $4,150 – $8,250 | $6,200 | −2% |
| Slidell, LA70 miles | $4,150 – $8,250 | $6,200 | −1% |
| Houma, LA85 miles | $4,150 – $8,250 | $6,200 | −2% |
| Alexandria, LA100 miles | $4,150 – $8,200 | $6,150 | −2% |
| Hattiesburg, MS120 miles | $4,250 – $8,400 | $6,300 | level |
| Louisiana (statewide) | $4,150 – $8,300 | $6,250 | −1% |
| United States | $4,550 – $9,150 | $6,850 | +8% |
Across 300 US metros, Baton Rouge comes in at #261 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Baton Rouge is 1% above the Louisiana figure.
Other Louisiana metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New Orleans, LA | 445,550 jobs | $4,150 – $8,350 | $6,250 | −1% |
| Lafayette, LA | 179,570 jobs | $4,150 – $8,250 | $6,200 | −2% |
| Shreveport, LA | 162,750 jobs | $4,150 – $8,250 | $6,200 | −2% |
| Lake Charles, LA | 101,690 jobs | $4,200 – $8,400 | $6,300 | level |
| Slidell, LA | 98,240 jobs | $4,150 – $8,250 | $6,200 | −1% |
| Monroe, LA | 87,500 jobs | $4,150 – $8,200 | $6,150 | −2% |
Cities with a workforce like Baton Rouge's
Big cities and small ones price differently, so here is Baton Rouge against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Knoxville, TN | 424,600 jobs | $4,350 – $8,650 | $6,500 | +3% |
| Madison, WI | 408,070 jobs | $4,400 – $9,000 | $6,700 | +6% |
| Greenville, SC | 434,900 jobs | $4,300 – $8,650 | $6,450 | +3% |
| Albuquerque, NM | 404,700 jobs | $4,350 – $8,700 | $6,550 | +3% |
Related projects, priced for Baton Rouge
Because every project leans on different trades, Baton Rouge's wage level does not move all prices equally. Against the US midpoint, concrete slab runs −5% and chain-link fence −11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,000 | −9% |
| Chain-link fence | 150 linear ft | $1,400 – $5,450 | −11% |
| Aluminum fence | 150 linear ft | $3,450 – $10,400 | −9% |
| Concrete slab | 400 sq ft | $2,350 – $4,950 | −5% |
When to schedule vinyl fence in Baton Rouge
We use NOAA's 1991-2020 climate normals for Baton Rouge Ryan Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Baton Rouge (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Baton Rouge gets about 62 inches of precipitation in a normal year. The wettest months are January, June and August (6.5 inches in June). Inside the workable window, September and November are the driest, at 4.4 and 3.9 inches. The station averages about 96 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 62 | 42 | 6.4 | Workable |
| Feb | 67 | 45 | 4.4 | Workable |
| Mar | 73 | 51 | 4.5 | Workable |
| Apr | 79 | 57 | 5.1 | Workable |
| May | 86 | 65 | 5.2 | Workable |
| Jun | 91 | 72 | 6.5 | Hot |
| Jul | 92 | 74 | 5.1 | Hot |
| Aug | 92 | 73 | 6.4 | Hot |
| Sep | 89 | 69 | 4.4 | Workable |
| Oct | 81 | 58 | 4.8 | Workable |
| Nov | 71 | 48 | 3.9 | Workable |
| Dec | 64 | 43 | 5.3 | Workable |
Baton Rouge: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Baton Rouge wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,200 to $5,900
4-ft picket or ranch rail
Standard
$5,450 to $7,150
6-ft privacy fence, standard white
Premium
$6,750 to $8,400
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,800 – $3,950 | $3,650 – $4,800 | $4,500 – $5,650 |
| 150 ft (150 linear ft) | $4,200 – $5,900 | $5,450 – $7,150 | $6,750 – $8,400 |
| 200 ft (200 linear ft) | $5,600 – $7,800 | $7,250 – $9,500 | $8,950 – $11,200 |
| full lot (300 linear ft) | $8,350 – $11,700 | $10,900 – $14,200 | $13,400 – $16,700 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,450 to $7,150 for Baton Rouge, LA is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Baton Rouge, LA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Baton Rouge: your questions
+How much does it cost to install a vinyl fence in Baton Rouge?
For 150 linear ft, expect $4,200 to $8,400 in the Baton Rouge area. A standard-spec job lands at $5,450 to $7,150. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Baton Rouge?
About $28 to $55 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Baton Rouge or Lafayette?
Lafayette is 70 miles away. The midpoint for 150 linear ft there is $6,200, which is 2% less than Baton Rouge ($6,300). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Baton Rouge?
About 21% at the midpoint, or $1,300 out of $6,300. Materials are 78% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Baton Rouge?
$5,600 to $11,200. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Baton Rouge?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Baton Rouge area (our national range of $40 to $150 scaled by the local price level).
+Is Baton Rouge expensive for vinyl fence compared with the rest of Louisiana?
Baton Rouge is 1% above the Louisiana statewide estimate ($6,250 at the midpoint). We cover 9 metros in Louisiana; see the state page to compare them.
+What do carpenters earn in Baton Rouge?
The BLS median is $26.75 an hour in the Baton Rouge area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.20 to $29.27.
+What do basic and premium vinyl fence work cost in Baton Rouge?
For 150 linear ft, basic work runs $4,200 to $5,900 and premium work $6,750 to $8,400. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Baton Rouge?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. September and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Baton Rouge?
$140 to $700, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Baton Rouge
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.