Vinyl fence cost in Columbia, MO
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,350 – $8,900
- Per linear ft
- $29 – $58.50
- before permit
- Versus US midpoint
- −3%
- US $6,850
- Rank of 300 metros
- #128
- 1 = most expensive
Columbia homeowners pay roughly $4,350 to $8,900 to install a vinyl fence at 150 linear ft, or $29 to $58.50 per linear ft (permit not included). Against the US midpoint, Columbia is 3% lower. Building materials run about 6% below the US average here (BEA goods price index 94.2).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Columbia, MO, standard level
$5,700 to $7,550
About $37.50 to $49.50 per linear ft before permits. Labor is about 24% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,400 | $5,500 |
| Labor | $1,300 | $1,900 |
| Permits and fees | $65 | $100 |
| Total | $5,700 | $7,550 |
Cost breakdown for 150 linear ft in Columbia, MO
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,550 | $4,950 | $6,350 | 75% |
| Labor | $800 | $1,600 | $2,400 | 24% |
| Permits and fees | $35 | $85 | $130 | 1% |
| Total | $4,350 | $6,650 | $8,900 | 100% |
What is behind the Columbia number
Labor is 24% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Columbia the blended ratio comes out at 1.07.
On the materials line, the BEA goods price index for the Columbia metro is 94.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,950, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (89.4) and land at $35 to $130.
When to schedule vinyl fence in Columbia
We use NOAA's 1991-2020 climate normals for Columbia U Of M (in the city). These are 30-year monthly averages, not forecasts.
February through November is the stretch where exterior installation runs into the fewest weather problems in Columbia (10 of 12 months). January and December have an average daytime high under 45°F.
In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Columbia gets about 45 inches of precipitation in a normal year, including roughly 17 inches of snow. The wettest months are April, May and June (5.2 inches in May). Inside the workable window, February and November are the driest, at 2.3 and 3.0 inches. The station averages about 41 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 39 | 23 | 2.4 | Cold |
| Feb | 45 | 27 | 2.3 | Workable |
| Mar | 56 | 36 | 3.2 | Workable |
| Apr | 67 | 46 | 4.8 | Workable |
| May | 76 | 56 | 5.2 | Workable |
| Jun | 85 | 65 | 5.1 | Workable |
| Jul | 89 | 69 | 4.6 | Workable |
| Aug | 88 | 67 | 4.1 | Workable |
| Sep | 80 | 59 | 4.3 | Workable |
| Oct | 68 | 47 | 3.5 | Workable |
| Nov | 55 | 37 | 3.0 | Workable |
| Dec | 44 | 27 | 2.2 | Cold |
Is Columbia cheap or dear? The local comparison
Of the five closest metros, 2 are cheaper than Columbia. Springfield is the lowest at about $6,450 (midpoint, 150 linear ft), 115 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Columbia, MOthis page | $4,350 – $8,900 | $6,650 | |
| Jefferson City, MO35 miles | $4,400 – $8,950 | $6,650 | level |
| Kansas City, MO100 miles | $4,350 – $8,850 | $6,600 | level |
| Springfield, MO115 miles | $4,250 – $8,600 | $6,450 | −3% |
| St. Louis, MO120 miles | $4,750 – $9,750 | $7,250 | +9% |
| Springfield, IL165 miles | $4,500 – $9,350 | $6,950 | +5% |
| Missouri (statewide) | $4,500 – $9,100 | $6,800 | +3% |
| United States | $4,550 – $9,150 | $6,850 | +3% |
Across 300 US metros, Columbia comes in at #128 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Columbia is 2% below the Missouri figure.
Other Missouri metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| St. Louis, MO | 1,341,320 jobs | $4,750 – $9,750 | $7,250 | +9% |
| Kansas City, MO | 1,096,110 jobs | $4,350 – $8,850 | $6,600 | level |
| Springfield, MO | 223,030 jobs | $4,250 – $8,600 | $6,450 | −3% |
| Joplin, MO | 87,190 jobs | $4,250 – $8,600 | $6,400 | −3% |
| Jefferson City, MO | 80,220 jobs | $4,400 – $8,950 | $6,650 | level |
Cities with a workforce like Columbia's
Big cities and small ones price differently, so here is Columbia against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bend, OR | 108,240 jobs | $4,800 – $9,650 | $7,250 | +9% |
| Hagerstown, MD | 107,170 jobs | $4,350 – $8,700 | $6,550 | −1% |
| Tuscaloosa, AL | 108,460 jobs | $4,250 – $8,400 | $6,350 | −5% |
| Champaign, IL | 105,500 jobs | $4,450 – $9,100 | $6,800 | +2% |
Cost by quality level and size in Columbia
Three bands are cut from the same cited range and localized for Columbia wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,350 to $6,200
4-ft picket or ranch rail
Standard
$5,700 to $7,550
6-ft privacy fence, standard white
Premium
$7,100 to $8,900
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,900 – $4,150 | $3,850 – $5,050 | $4,750 – $5,950 |
| 150 ft (150 linear ft) | $4,350 – $6,200 | $5,700 – $7,550 | $7,100 – $8,900 |
| 200 ft (200 linear ft) | $5,800 – $8,200 | $7,600 – $10,000 | $9,400 – $11,800 |
| full lot (300 linear ft) | $8,700 – $12,300 | $11,400 – $15,000 | $14,100 – $17,600 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Columbia is 1.07 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $27.00 an hour, which is 7% below the national $29.12. The middle half of them earn between $21.95 and $33.85 an hour. BLS counts 510 of them working in the area, 47.4 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 50% of the weighting: a median of $27.31 an hour, 21% above the US median of $22.66. The middle half of them earn between $21.64 and $37.38 an hour. About 470 work in the metro. That is 43.6 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($33.85 an hour) instead of the median, the labor line grows by about $180. At the 25th percentile ($21.95) it shrinks by about $130. The total moves by 2.7% or 2.0%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 107,680 jobs in the Columbia area. That makes it the 194th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.95 | $27.00 | $33.85 | $29.12 | 0.93 | metro |
| Construction laborers (47-2061) | 50% | $21.64 | $27.31 | $37.38 | $22.66 | 1.21 | metro |
| Blended | 100% | 1.07 | |||||
Add-ons priced for Columbia
Extras are quoted nationally and then scaled to Columbia by the average of the local wage index (1.07) and goods index (0.94), a factor of 1.00. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $150 – $780 |
| Remove old fence | $1,500 – $3,000 |
Related projects, priced for Columbia
Because every project leans on different trades, Columbia's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +3% and aluminum fence −3%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,000 – $7,500 | −2% |
| Chain-link fence | 150 linear ft | $1,550 – $6,400 | +3% |
| Aluminum fence | 150 linear ft | $3,700 – $11,100 | −3% |
| Concrete slab | 400 sq ft | $2,450 – $5,150 | −1% |
Specs and site conditions that change a Columbia bid
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,700 to $7,550 for Columbia, MO is attached.
Detailed vinyl fence report for Columbia, MO, $9
The report lays out the vinyl fence numbers for Columbia, MO line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Columbia: your questions
+How much does it cost to install a vinyl fence in Columbia?
For 150 linear ft, expect $4,350 to $8,900 in the Columbia area. A standard-spec job lands at $5,700 to $7,550. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Columbia?
About $29 to $58.50 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Columbia or Jefferson City?
Jefferson City is 35 miles away. The midpoint for 150 linear ft there is $6,650, which is 0% more than Columbia ($6,650). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Columbia?
About 24% at the midpoint, or $1,600 out of $6,650. Materials are 75% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Columbia?
$5,800 to $11,800. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Columbia?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Columbia area (our national range of $40 to $150 scaled by the local price level).
+Is Columbia expensive for vinyl fence compared with the rest of Missouri?
Columbia is 2% below the Missouri statewide estimate ($6,800 at the midpoint). We cover 6 metros in Missouri; see the state page to compare them.
+What do carpenters earn in Columbia?
The BLS median is $27.00 an hour in the Columbia area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.95 to $33.85.
+What do basic and premium vinyl fence work cost in Columbia?
For 150 linear ft, basic work runs $4,350 to $6,200 and premium work $7,100 to $8,900. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Columbia?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through November. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Columbia?
$150 to $780, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Columbia
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.