Vinyl fence cost in Jefferson City, MO
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,400 – $8,950
- Per linear ft
- $29 – $58.50
- before permit
- Versus US midpoint
- −3%
- US $6,850
- Rank of 300 metros
- #115
- 1 = most expensive
If you want to install a vinyl fence in Jefferson City, plan on $4,400 to $8,950 for 150 linear ft, all in. Per linear ft, that is $29 to $58.50 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Building materials run about 6% below the US average here (BEA goods price index 94.2).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Jefferson City, MO, standard level
$5,750 to $7,550
About $38 to $50 per linear ft before permits. Labor is about 25% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,400 | $5,500 |
| Labor | $1,300 | $1,950 |
| Permits and fees | $65 | $100 |
| Total | $5,750 | $7,550 |
Cost breakdown for 150 linear ft in Jefferson City, MO
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,550 | $4,950 | $6,350 | 74% |
| Labor | $820 | $1,650 | $2,450 | 25% |
| Permits and fees | $35 | $85 | $130 | 1% |
| Total | $4,400 | $6,650 | $8,950 | 100% |
What is behind the Jefferson City number
We price the labor side from BLS wage data for 2 trades: carpenters at 50%, construction laborers at 50%. Weighted together, Jefferson City wages are 1.09 times the national level. Labor makes up about 25% of the midpoint estimate (22% at national prices).
On the materials line, the BEA goods price index for the Jefferson City metro is 94.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,950, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (88.0) and land at $35 to $130.
Is Jefferson City cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. St. Louis is the priciest of the group at $7,250. Springfield is the cheapest at $6,450.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Jefferson City, MOthis page | $4,400 – $8,950 | $6,650 | |
| Columbia, MO35 miles | $4,350 – $8,900 | $6,650 | level |
| St. Louis, MO95 miles | $4,750 – $9,750 | $7,250 | +9% |
| Springfield, MO105 miles | $4,250 – $8,600 | $6,450 | −3% |
| Kansas City, MO130 miles | $4,350 – $8,850 | $6,600 | −1% |
| Springfield, IL150 miles | $4,500 – $9,350 | $6,950 | +4% |
| Missouri (statewide) | $4,500 – $9,100 | $6,800 | +2% |
| United States | $4,550 – $9,150 | $6,850 | +3% |
Across 300 US metros, Jefferson City comes in at #115 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Jefferson City is 2% below the Missouri figure.
Other Missouri metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| St. Louis, MO | 1,341,320 jobs | $4,750 – $9,750 | $7,250 | +9% |
| Kansas City, MO | 1,096,110 jobs | $4,350 – $8,850 | $6,600 | −1% |
| Springfield, MO | 223,030 jobs | $4,250 – $8,600 | $6,450 | −3% |
| Columbia, MO | 107,680 jobs | $4,350 – $8,900 | $6,650 | level |
| Joplin, MO | 87,190 jobs | $4,250 – $8,600 | $6,400 | −4% |
Cities with a workforce like Jefferson City's
Big cities and small ones price differently, so here is Jefferson City against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Greenville, NC | 80,770 jobs | $4,300 – $8,550 | $6,400 | −4% |
| Las Cruces, NM | 80,000 jobs | $4,300 – $8,650 | $6,450 | −3% |
| Odessa, TX | 80,910 jobs | $4,200 – $8,350 | $6,250 | −6% |
| Saginaw, MI | 80,000 jobs | $4,350 – $8,800 | $6,550 | −2% |
Pick a size, pick a tier: vinyl fence pricing in Jefferson City
Three bands are cut from the same cited range and localized for Jefferson City wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,400 to $6,200
4-ft picket or ranch rail
Standard
$5,750 to $7,550
6-ft privacy fence, standard white
Premium
$7,100 to $8,950
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,950 – $4,150 | $3,850 – $5,100 | $4,800 – $6,000 |
| 150 ft (150 linear ft) | $4,400 – $6,200 | $5,750 – $7,550 | $7,100 – $8,950 |
| 200 ft (200 linear ft) | $5,850 – $8,250 | $7,650 – $10,100 | $9,450 – $11,900 |
| full lot (300 linear ft) | $8,750 – $12,300 | $11,400 – $15,000 | $14,100 – $17,700 |
Specs and site conditions that change a Jefferson City bid
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Jefferson City labor market for vinyl fence
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Jefferson City is 1.09 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $27.42 an hour, which is 6% below the national $29.12. The middle half of them earn between $22.36 and $31.22 an hour. BLS counts 430 of them working in the area, 53.6 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 50% of the weighting: a median of $27.99 an hour, 24% above the US median of $22.66. The middle half of them earn between $21.79 and $36.61 an hour. About 580 work in the metro. That is 72.3 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($31.22 an hour) instead of the median, the labor line grows by about $100. At the 25th percentile ($22.36) it shrinks by about $130. The total moves by 1.5% or 2.0%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 80,220 jobs in the Jefferson City area. That makes it the 237th largest of the 300 metros we cover, with 0.05% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $22.36 | $27.42 | $31.22 | $29.12 | 0.94 | metro |
| Construction laborers (47-2061) | 50% | $21.79 | $27.99 | $36.61 | $22.66 | 1.24 | metro |
| Blended | 100% | 1.09 | |||||
Optional extras in Jefferson City
Extras are quoted nationally and then scaled to Jefferson City by the average of the local wage index (1.09) and goods index (0.94), a factor of 1.02. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $150 – $790 |
| Remove old fence | $1,500 – $3,050 |
Related projects, priced for Jefferson City
Because every project leans on different trades, Jefferson City's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +5% and wood fence −1%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,050 – $7,550 | −1% |
| Chain-link fence | 150 linear ft | $1,550 – $6,500 | +5% |
| Aluminum fence | 150 linear ft | $3,850 – $11,400 | +1% |
| Concrete slab | 400 sq ft | $2,500 – $5,200 | level |
Climate in Jefferson City: timing your vinyl fence job
We use NOAA's 1991-2020 climate normals for Jefferson City Mem Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
February through December is the stretch where exterior installation runs into the fewest weather problems in Jefferson City (11 of 12 months). January has an average daytime high under 45°F.
In January the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Jefferson City gets about 40 inches of precipitation in a normal year. The wettest months are April, May and July (4.9 inches in May). Inside the workable window, February and December are the driest, at 1.9 and 2.1 inches. The station averages about 41 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 41 | 23 | 2.0 | Cold |
| Feb | 47 | 26 | 1.9 | Workable |
| Mar | 58 | 35 | 2.9 | Workable |
| Apr | 68 | 45 | 4.4 | Workable |
| May | 77 | 55 | 4.9 | Workable |
| Jun | 85 | 65 | 3.6 | Workable |
| Jul | 89 | 69 | 4.4 | Workable |
| Aug | 88 | 66 | 3.6 | Workable |
| Sep | 80 | 57 | 3.7 | Workable |
| Oct | 70 | 46 | 3.4 | Workable |
| Nov | 57 | 35 | 2.8 | Workable |
| Dec | 45 | 26 | 2.1 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,750 to $7,550 for Jefferson City, MO is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Jefferson City, MO: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Jefferson City: your questions
+How much does it cost to install a vinyl fence in Jefferson City?
For 150 linear ft, expect $4,400 to $8,950 in the Jefferson City area. A standard-spec job lands at $5,750 to $7,550. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Jefferson City?
About $29 to $58.50 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Jefferson City or Columbia?
Columbia is 35 miles away. The midpoint for 150 linear ft there is $6,650, which is 0% less than Jefferson City ($6,650). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Jefferson City?
About 25% at the midpoint, or $1,650 out of $6,650. Materials are 74% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Jefferson City?
$5,850 to $11,900. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Jefferson City?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Jefferson City area (our national range of $40 to $150 scaled by the local price level).
+Is Jefferson City expensive for vinyl fence compared with the rest of Missouri?
Jefferson City is 2% below the Missouri statewide estimate ($6,800 at the midpoint). We cover 6 metros in Missouri; see the state page to compare them.
+What do carpenters earn in Jefferson City?
The BLS median is $27.42 an hour in the Jefferson City area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.36 to $31.22.
+What do basic and premium vinyl fence work cost in Jefferson City?
For 150 linear ft, basic work runs $4,400 to $6,200 and premium work $7,100 to $8,950. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Jefferson City?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Jefferson City?
$150 to $790, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Jefferson City
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.