Stamped concrete cost in Bremerton, WA

Bremerton: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Bremerton wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Bremerton labor market for stamped concrete

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Bremerton is 1.29 times the national level.

Cement masons and concrete finishers (47-2051) carry 60% of the labor weighting. BLS does not publish this trade for the Bremerton metro, so we used the Washington statewide median: $37.27 an hour against $27.41 for the US. The middle half of them earn between $28.31 and $47.25 an hour.

Construction laborers (47-2061), 30% of the weighting: a median of $26.30 an hour, 16% above the US median of $22.66. The middle half of them earn between $22.39 and $31.03 an hour. About 620 work in the metro. That is 66.1 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $37.39 an hour, which is 30% above the national $28.78. The middle half of them earn between $30.98 and $44.91 an hour. BLS counts 180 of them working in the area, 19.2 for every 10,000 jobs (US: 30.7), so the local bench is thinner than average.

Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($47.25 an hour) instead of the median, the labor line grows by about $590. At the 25th percentile ($28.31) it shrinks by about $530. The total moves by 9.0% or 8.1%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 93,740 jobs in the Bremerton-Silverdale-Port Orchard area. That makes it the 216th largest of the 300 metros we cover, with 0.06% of US employment.

Climate in Bremerton: timing your stamped concrete job

We use NOAA's 1991-2020 climate normals for Bremerton (5 miles from the city center). These are 30-year monthly averages, not forecasts.

April through October is the stretch where pouring concrete runs into the fewest weather problems in Bremerton (7 of 12 months). January, February, March, November and December have an average overnight low of 40°F or below.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Bremerton gets about 57 inches of precipitation in a normal year, including roughly 3 inches of snow. The wettest months are January, November and December (9.9 inches in December). Inside the workable window, July and August are the driest, at 0.8 and 1.1 inches. The station averages about 4 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Planning more than one job in Bremerton?

Because every project leans on different trades, Bremerton's wage level does not move all prices equally. Against the US midpoint, asphalt driveway runs +20% and gravel driveway +14%.

Extras that change the Bremerton total

Extras are quoted nationally and then scaled to Bremerton by the average of the local wage index (1.29) and goods index (1.05), a factor of 1.17. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Specs and site conditions that change a Bremerton bid

• Pattern and color

  Basic to average coloring runs $8-$19 per sq ft. A 2-car stamped driveway runs $12-$18 per sq ft (HomeGuide); Estimators.us puts decorative slabs at $15-$30.

• Specialist labor

  Stamping has to be done before the concrete sets, so crews arrive in larger teams and charge for it.

• Sealing and vapor barrier

  Sealer is usually quoted separately; vapor barrier material is $0.20-$1.50 per sq ft depending on thickness (HomeGuide).

Bremerton against nearby metros and the rest of Washington

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 400 sq ft range from $6,450 to $6,800 across Bremerton and its five closest metros.

Across 300 US metros, Bremerton comes in at #14 from the top. The priciest is Kahului, HI at $8,150; the cheapest is McAllen, TX at $4,550 (midpoints, 400 sq ft). Statewide, Bremerton is 1% below the Washington figure.

Other Washington metros

Cities with a workforce like Bremerton's

Big cities and small ones price differently, so here is Bremerton against the 4 metros with the closest total employment.