Skip to content
CostLocal

Stamped concrete cost in St. George, UT

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (400 sq ft)
$3,050 – $7,400
Per sq ft
$7.45 – $17.50
before permit
Versus US midpoint
−7%
US $5,600
Rank of 300 metros
#189
1 = most expensive

St. George homeowners pay roughly $3,050 to $7,400 to pour stamped concrete at 400 sq ft, or $7.45 to $17.50 per sq ft (permit not included). Against the US midpoint, St. George is 7% lower. Cement masons and concrete finishers earn a median of $23.11 an hour in the St. George area, 16% below the US median of $27.41.

Estimate your stamped concrete cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Two-tone color release and a border

Add-ons

Estimated cost for 400 sq ft in St. George, UT, standard level

$4,350 to $6,100

About $10.50 to $14.50 per sq ft before permits. Labor is about 46% of the bill.

Cost breakdown
PartLowHigh
Materials$2,250$2,950
Labor$1,950$2,900
Permits and fees$140$250
Total$4,350$6,100
Save and get a PDF report

Cost breakdown for 400 sq ft in St. George, UT

Part of the jobLowMidpointHighShare
Materials$1,750$2,600$3,45050%
Labor$1,250$2,400$3,55046%
Permits and fees$50$190$3404%
Total$3,050$5,200$7,400100%

Where the St. George price comes from

We price the labor side from BLS wage data for 3 trades: cement masons and concrete finishers at 60%, construction laborers at 30%, operating engineers and other construction equipment operators at 10%. Weighted together, St. George wages are 0.89 times the national level. Labor makes up about 46% of the midpoint estimate (48% at national prices).

On the materials line, the BEA goods price index for the St. George metro is 96.4 (US = 100). The midpoint materials bill for 400 sq ft comes to $2,600, compared with $2,700 at national prices. Permit and inspection fees are scaled by the broader index (97.3) and land at $50 to $340.

Stamped concrete: what moves the price in St. George

  • Not included

    These prices don't include site prep that depends on the project: demolition, grading, or a thicker base.

  • Pattern and color

    Basic to average coloring runs $8-$19 per sq ft. A 2-car stamped driveway runs $12-$18 per sq ft (HomeGuide); Estimators.us puts decorative slabs at $15-$30.

  • Specialist labor

    Stamping has to be done before the concrete sets, so crews arrive in larger teams and charge for it.

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for St. George is 0.89 times the national level.

For cement masons and concrete finishers (47-2051, weighted 60%) the local median is $23.11 an hour, which is 16% below the national $27.41. The middle half of them earn between $22.22 and $28.78 an hour. BLS counts 520 of them working in the area, 57.5 for every 10,000 jobs (US: 13.3), so the local bench is deeper than average.

Construction laborers (47-2061), 30% of the weighting: a median of $21.96 an hour, 3% below the US median of $22.66. The middle half of them earn between $18.37 and $23.78 an hour. About 1,500 work in the metro. That is 165.7 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $27.84 an hour, which is 3% below the national $28.78. The middle half of them earn between $23.59 and $29.54 an hour. BLS counts 670 of them working in the area, 74.0 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($28.78 an hour) instead of the median, the labor line grows by about $340. At the 25th percentile ($22.22) it shrinks by about $55. The total moves by 6.4% or 1.0%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 90,500 jobs in the St. George area. That makes it the 219th largest of the 300 metros we cover, with 0.06% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)60%$22.22$23.11$28.78$27.410.84metro
Construction laborers (47-2061)30%$18.37$21.96$23.78$22.660.97metro
Operating engineers and other construction equipment operators (47-2073)10%$23.59$27.84$29.54$28.780.97metro
Blended100%0.89

What nearby projects cost in St. George

Because every project leans on different trades, St. George's wage level does not move all prices equally. Against the US midpoint, gravel driveway runs −3% and concrete driveway −9%.

Related projects with local prices
ProjectSizeRangevs. US
Concrete patio300 sq ft$1,150 – $3,700−7%
Concrete driveway600 sq ft$3,350 – $8,350−9%
Paver patio300 sq ft$2,850 – $5,150−6%
Concrete slab400 sq ft$2,250 – $4,850−7%
Asphalt driveway600 sq ft$2,900 – $7,100−4%
Gravel driveway1,000 sq ft$2,400 – $9,850−3%

Is St. George cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 400 sq ft range from $5,200 to $5,650 across St. George and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
St. George, UTthis page$3,050 – $7,400$5,200
Lake Havasu City, AZ110 miles$3,050 – $7,400$5,200level
Las Vegas, NV110 miles$3,250 – $8,050$5,650+8%
Flagstaff, AZ135 miles$3,200 – $7,850$5,500+6%
Prescott Valley, AZ190 miles$3,050 – $7,450$5,250+1%
Provo, UT190 miles$3,100 – $7,550$5,350+2%
Utah (statewide)$3,150 – $7,800$5,500+5%
United States$3,250 – $7,950$5,600+7%

Across 300 US metros, St. George comes in at #189 from the top. The priciest is Kahului, HI at $8,150; the cheapest is McAllen, TX at $4,550 (midpoints, 400 sq ft). Statewide, St. George is 5% below the Utah figure.

Other Utah metros

Utah metros compared with St. George
MetroSizeRangeMidpointvs. here
Salt Lake City, UT826,210 jobs$3,250 – $8,000$5,650+8%
Provo, UT304,660 jobs$3,100 – $7,550$5,350+2%
Ogden, UT271,370 jobs$3,100 – $7,600$5,350+3%
Logan, UT66,800 jobs$3,050 – $7,450$5,250+1%

Cities with a workforce like St. George's

Big cities and small ones price differently, so here is St. George against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Panama City, FL90,610 jobs$3,000 – $7,250$5,100−2%
Medford, OR89,060 jobs$3,450 – $8,450$5,950+14%
Bellingham, WA91,390 jobs$3,800 – $9,500$6,650+28%
Florence, SC89,060 jobs$3,000 – $7,200$5,100−2%

When to schedule stamped concrete in St. George

We use NOAA's 1991-2020 climate normals for St George (5 miles from the city center). These are 30-year monthly averages, not forecasts.

April through May and October are the stretches where pouring concrete runs into the fewest weather problems in St. George (3 of 12 months). January, February, March, November and December have an average overnight low of 40°F or below; June, July, August and September have an average daytime high of 90°F or more.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Heat matters for concrete as well. With average highs of 90°F or more in June, July, August and September, crews often start early, wet the base and plan for faster set times.

St. George gets about 9 inches of precipitation in a normal year, including roughly 1 inches of snow. The wettest months are January, February and August (1.4 inches in February). Inside the workable window, April and May are the driest, at 0.7 and 0.3 inches. The station averages about 128 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, St George (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan54281.2Cold
Feb59321.4Cold
Mar68391.0Cold
Apr75460.7Workable
May85560.3Workable
Jun96650.2Hot
Jul102720.5Hot
Aug100701.1Hot
Sep92610.7Hot
Oct79470.8Workable
Nov64350.7Cold
Dec53280.9Cold

St. George: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for St. George wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$3,050 to $4,800

Basic pattern, one integral color

Standard

$4,350 to $6,100

Two-tone color release and a border

Premium

$5,650 to $7,400

Multi-color, hand-detailed, sealed to a high finish

Cost by size and quality level
SizeBasicStandardPremium
10x20 patio (200 sq ft)$1,550 – $2,450$2,250 – $3,150$2,950 – $3,850
20x20 patio (400 sq ft)$3,050 – $4,800$4,350 – $6,100$5,650 – $7,400
2-car driveway (600 sq ft)$4,550 – $7,100$6,450 – $9,000$8,350 – $10,900

Extras that change the St. George total

Extras are quoted nationally and then scaled to St. George by the average of the local wage index (0.89) and goods index (0.96), a factor of 0.93. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add a vapor barrier$190 – $370

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,350 to $6,100 for St. George, UT is attached.

Take this estimate with you: PDF report, $9

Multi-page report for St. George, UT: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Stamped concrete in St. George: your questions

+How much does it cost to pour stamped concrete in St. George?

For 400 sq ft, expect $3,050 to $7,400 in the St. George area. A standard-spec job lands at $4,350 to $6,100. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for stamped concrete in St. George?

About $7.45 to $17.50 per sq ft for materials and labor, plus $50 to $340 for the permit if one is needed. The US range is $8 to $19.

+Is stamped concrete cheaper in St. George or Lake Havasu City?

Lake Havasu City is 110 miles away. The midpoint for 400 sq ft there is $5,200, which is 0% less than St. George ($5,200). Wage and materials indexes both feed that gap.

+How much of the bill is labor in St. George?

About 46% at the midpoint, or $2,400 out of $5,200. Materials are 50% and permits 4%. Nationally, labor is 48%.

+What would 20x20 patio (400 sq ft) cost in St. George?

$3,050 to $7,400. Pick a different size in the estimator above to get your own number.

+Does stamped concrete need a permit in St. George?

Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $340 for fees in the St. George area (our national range of $50 to $350 scaled by the local price level).

+Is St. George expensive for stamped concrete compared with the rest of Utah?

St. George is 5% below the Utah statewide estimate ($5,500 at the midpoint). We cover 5 metros in Utah; see the state page to compare them.

+What do cement masons and concrete finishers earn in St. George?

The BLS median is $23.11 an hour in the St. George area, compared with $27.41 nationally. The 25th to 75th percentile range is $22.22 to $28.78.

+What do basic and premium stamped concrete work cost in St. George?

For 400 sq ft, basic work runs $3,050 to $4,800 and premium work $5,650 to $7,400. Basic means: basic pattern, one integral color. Premium means: multi-color, hand-detailed, sealed to a high finish.

+When is the best time to pour stamped concrete in St. George?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through May and October. April and May are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add a vapor barrier" add in St. George?

$190 to $370 for 400 sq ft, from a national range scaled by the local wage and goods indexes.

Stamped concrete near St. George

Stamped concrete: all pricesStamped concrete in UtahAll projects in St. GeorgeUtah cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = SimplyWise's 200 sq ft stamped-patio line ($900-$1,800), divided by 200 sq ft.