Paver patio cost in Phoenix, AZ
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (300 sq ft)
- $2,900 – $5,300
- Per sq ft
- $9.70 – $16.50
- before permit
- Versus US midpoint
- −3%
- US $4,250
- Rank of 300 metros
- #162
- 1 = most expensive
If you want to install a paver patio in Phoenix, plan on $2,900 to $5,300 for 300 sq ft, all in. Per sq ft, that is $9.70 to $16.50 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Building materials run about 5% below the US average here (BEA goods price index 95.0).
Estimate your paver patio cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 300 sq ft in Phoenix, AZ, standard level
$3,650 to $4,600
About $12 to $14.50 per sq ft before permits. Labor is about 61% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,300 | $1,550 |
| Labor | $2,200 | $2,800 |
| Permits and fees | $110 | $250 |
| Total | $3,650 | $4,600 |
Cost breakdown for 300 sq ft in Phoenix, AZ
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,150 | $1,450 | $1,700 | 35% |
| Labor | $1,750 | $2,500 | $3,250 | 61% |
| Permits and fees | $0 | $180 | $360 | 4% |
| Total | $2,900 | $4,100 | $5,300 | 100% |
Where the Phoenix price comes from
The wage side of the estimate leans on construction laborers, who do 50% of the hours on a typical job. Their local median is $22.56 an hour. Add the other trades involved and the blended wage index for Phoenix is 0.98 (US = 1.00), which puts labor at 61% of the total.
On the materials line, the BEA goods price index for the Phoenix metro is 95.0 (US = 100). The midpoint materials bill for 300 sq ft comes to $1,450, compared with $1,500 at national prices. Permit and inspection fees are scaled by the broader index (103.3) and land at $0 to $360.
Is Phoenix cheap or dear? The local comparison
Of the five closest metros, 4 are cheaper than Phoenix. Yuma is the lowest at about $4,000 (midpoint, 300 sq ft), 110 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Phoenix, AZthis page | $2,900 – $5,300 | $4,100 | |
| Tucson, AZ75 miles | $2,850 – $5,150 | $4,000 | −3% |
| Prescott Valley, AZ105 miles | $2,900 – $5,300 | $4,100 | −1% |
| Yuma, AZ110 miles | $2,850 – $5,100 | $4,000 | −3% |
| Flagstaff, AZ185 miles | $2,900 – $5,300 | $4,100 | level |
| El Centro, CA190 miles | $3,300 – $5,950 | $4,600 | +12% |
| Arizona (statewide) | $2,900 – $5,300 | $4,100 | level |
| United States | $3,000 – $5,450 | $4,250 | +3% |
Across 300 US metros, Phoenix comes in at #162 from the top. The priciest is Kahului, HI at $5,650; the cheapest is Dothan, AL at $3,500 (midpoints, 300 sq ft). Statewide, Phoenix is 0% above the Arizona figure.
Other Arizona metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Tucson, AZ | 389,630 jobs | $2,850 – $5,150 | $4,000 | −3% |
| Prescott Valley, AZ | 72,300 jobs | $2,900 – $5,300 | $4,100 | −1% |
| Yuma, AZ | 68,880 jobs | $2,850 – $5,100 | $4,000 | −3% |
| Flagstaff, AZ | 66,610 jobs | $2,900 – $5,300 | $4,100 | level |
| Lake Havasu City, AZ | 56,490 jobs | $2,850 – $5,150 | $4,000 | −3% |
Cities with a workforce like Phoenix's
Big cities and small ones price differently, so here is Phoenix against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Boston, MA | 2,703,890 jobs | $3,700 – $6,750 | $5,250 | +27% |
| San Francisco, CA | 2,373,920 jobs | $3,800 – $6,950 | $5,350 | +30% |
| Miami, FL | 2,819,940 jobs | $2,950 – $5,400 | $4,150 | +1% |
| Seattle, WA | 2,086,210 jobs | $3,700 – $6,750 | $5,200 | +26% |
Related projects, priced for Phoenix
Because every project leans on different trades, Phoenix's wage level does not move all prices equally. Against the US midpoint, concrete driveway runs level and retaining wall −3%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete patio | 300 sq ft | $1,200 – $4,000 | −1% |
| Stamped concrete | 400 sq ft | $3,200 – $7,900 | −1% |
| Retaining wall | 200 sq ft of wall face | $6,850 – $13,000 | −3% |
| Wood deck | 300 sq ft | $7,350 – $14,700 | −3% |
| Concrete slab | 400 sq ft | $2,400 – $5,100 | −1% |
| Concrete driveway | 600 sq ft | $3,650 – $9,250 | level |
Specs and site conditions that change a Phoenix bid
Paver material
Pavers alone average $2-$4 per sq ft but the full range is $1-$15 depending on concrete, brick, or natural stone (HomeGuide).
Base prep
The base (road base, fabric, edging, bedding and joint sand) is $1.40-$2.20 per sq ft of the materials number.
Excavation and grading
Digging out is $1-$5 per sq ft; regrading a sloped yard is $0.40-$2.00 per sq ft.
Climate in Phoenix: timing your paver patio job
We use NOAA's 1991-2020 climate normals for Phoenix Deer Valley Muni Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.
October through April is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Phoenix (7 of 12 months). May, June, July, August and September have an average daytime high of 90°F or more.
Phoenix gets about 9 inches of precipitation in a normal year. The wettest months are January, February and March (1.2 inches in February). Inside the workable window, April and October are the driest, at 0.3 and 0.7 inches. The station averages about 159 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 65 | 44 | 1.2 | Workable |
| Feb | 68 | 46 | 1.2 | Workable |
| Mar | 75 | 51 | 1.1 | Workable |
| Apr | 83 | 57 | 0.3 | Workable |
| May | 92 | 65 | 0.2 | Hot |
| Jun | 102 | 73 | 0.0 | Hot |
| Jul | 104 | 81 | 0.8 | Hot |
| Aug | 103 | 81 | 1.0 | Hot |
| Sep | 98 | 75 | 0.7 | Hot |
| Oct | 86 | 63 | 0.7 | Workable |
| Nov | 74 | 51 | 0.9 | Workable |
| Dec | 64 | 43 | 0.8 | Workable |
Pick a size, pick a tier: paver patio pricing in Phoenix
Three bands are cut from the same cited range and localized for Phoenix wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,900 to $3,900
Basic concrete pavers, simple pattern, level yard
Standard
$3,650 to $4,600
Mid-grade pavers, a border or curve, some regrading
Premium
$4,350 to $5,300
Natural stone or clay brick, complex pattern, slope or retaining edge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 12x12 (144 sq ft) | $1,400 – $1,950 | $1,800 – $2,350 | $2,200 – $2,750 |
| 16x16 (256 sq ft) | $2,500 – $3,350 | $3,100 – $3,950 | $3,750 – $4,600 |
| 20x20 (400 sq ft) | $3,900 – $5,100 | $4,800 – $6,050 | $5,750 – $6,950 |
| pool deck (800 sq ft) | $7,750 – $10,100 | $9,500 – $11,800 | $11,300 – $13,600 |
Optional extras in Phoenix
Extras are quoted nationally and then scaled to Phoenix by the average of the local wage index (0.98) and goods index (0.95), a factor of 0.97. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Excavation and haul-away | $290 – $1,450 |
Phoenix labor market for paver patio
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Phoenix is 0.98 times the national level.
Construction laborers (47-2061), 50% of the weighting: a median of $22.56 an hour, in line with the US median of $22.66. The middle half of them earn between $19.79 and $24.90 an hour. About 29,230 work in the metro. That is 123.0 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Brickmasons and blockmasons (47-2021), 30% of the weighting: a median of $28.55 an hour, 4% below the US median of $29.87. The middle half of them earn between $27.31 and $33.48 an hour. About 930 work in the metro. That is 3.9 per 10,000 jobs, compared with 3.4 nationally, which suggests plenty of local crews to bid.
For landscaping and groundskeeping workers (37-3011, weighted 20%) the local median is $18.82 an hour, which is in line with the national $18.82. The middle half of them earn between $18.24 and $21.79 an hour. BLS counts 16,850 of them working in the area, 70.9 for every 10,000 jobs (US: 61.3), so the local bench is deeper than average.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($24.90 an hour) instead of the median, the labor line grows by about $130. At the 25th percentile ($19.79) it shrinks by about $160. The total moves by 3.2% or 3.8%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 2,375,760 jobs in the Phoenix-Mesa-Chandler area. That makes it the 11th largest of the 300 metros we cover, with 1.53% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $19.79 | $22.56 | $24.90 | $22.66 | 1.00 | metro |
| Brickmasons and blockmasons (47-2021) | 30% | $27.31 | $28.55 | $33.48 | $29.87 | 0.96 | metro |
| Landscaping and groundskeeping workers (37-3011) | 20% | $18.24 | $18.82 | $21.79 | $18.82 | 1.00 | metro |
| Blended | 100% | 0.98 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,650 to $4,600 for Phoenix, AZ is attached.
Detailed paver patio report for Phoenix, AZ, $9
The report lays out the paver patio numbers for Phoenix, AZ line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Paver patio in Phoenix: your questions
+How much does it cost to install a paver patio in Phoenix?
For 300 sq ft, expect $2,900 to $5,300 in the Phoenix area. A standard-spec job lands at $3,650 to $4,600. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for paver patio in Phoenix?
About $9.70 to $16.50 per sq ft for materials and labor, plus $0 to $360 for the permit if one is needed. The US range is $10 to $17.
+Is paver patio cheaper in Phoenix or Tucson?
Tucson is 75 miles away. The midpoint for 300 sq ft there is $4,000, which is 3% less than Phoenix ($4,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Phoenix?
About 61% at the midpoint, or $2,500 out of $4,100. Materials are 35% and permits 4%. Nationally, labor is 60%.
+What would 20x20 (400 sq ft) cost in Phoenix?
$3,900 to $6,950. Pick a different size in the estimator above to get your own number.
+Does paver patio need a permit in Phoenix?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $360 for fees in the Phoenix area (our national range of $0 to $350 scaled by the local price level).
+Is Phoenix expensive for paver patio compared with the rest of Arizona?
Phoenix is 0% above the Arizona statewide estimate ($4,100 at the midpoint). We cover 6 metros in Arizona; see the state page to compare them.
+What do construction laborers earn in Phoenix?
The BLS median is $22.56 an hour in the Phoenix area, compared with $22.66 nationally. The 25th to 75th percentile range is $19.79 to $24.90.
+What do basic and premium paver patio work cost in Phoenix?
For 300 sq ft, basic work runs $2,900 to $3,900 and premium work $4,350 to $5,300. Basic means: basic concrete pavers, simple pattern, level yard. Premium means: natural stone or clay brick, complex pattern, slope or retaining edge.
+When is the best time to install a paver patio in Phoenix?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through April. April and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "excavation and haul-away" add in Phoenix?
$290 to $1,450 for 300 sq ft, from a national range scaled by the local wage and goods indexes.
Paver patio near Phoenix
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: 2026 Paver Patio Cost | Paver Installation Costs (accessed November 4, 2026)
- HomeGuide: How Much Does Stamped Concrete Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020