Gutters cost in Indiana
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (160 linear ft)
- $1,300 – $4,150
- Per linear ft
- $8 – $24.50
- before permit
- Versus US midpoint
- −1%
- US $2,750
- Metros covered
- 8
Indiana prices for gutters: $1,300 to $4,150 for 160 linear ft, or $8 to $24.50 per linear ft without the permit. The state midpoint is 1% below the national one. Local wages for sheet metal workers are $30.79 an hour.
Inside Indiana, the metros we cover range from $2,600 (Fort Wayne) to $2,850 (South Bend) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Indiana (statewide), standard level
$2,150 to $3,300
About $13 to $19.50 per linear ft before permits. Labor is about 40% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $920 | $1,250 |
| Permits and fees | $55 | $130 |
| Total | $2,150 | $3,300 |
Cost breakdown for 160 linear ft in Indiana
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $610 | $1,550 | $2,450 | 56% |
| Labor | $670 | $1,100 | $1,500 | 40% |
| Permits and fees | $0 | $95 | $190 | 3% |
| Total | $1,300 | $2,700 | $4,150 | 100% |
Indiana metro-by-metro prices
2 of the 8 metros sit above the statewide midpoint of $2,700, and the top-to-bottom gap is 9%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (160 linear ft) | Midpoint | vs. state |
|---|---|---|---|
| South Bend, IN | $1,350 – $4,300 | $2,850 | +5% |
| Evansville, IN | $1,350 – $4,250 | $2,800 | +3% |
| Terre Haute, IN | $1,250 – $4,100 | $2,700 | −1% |
| Indianapolis, IN | $1,250 – $4,100 | $2,700 | −1% |
| Elkhart, IN | $1,250 – $4,050 | $2,650 | −2% |
| Bloomington, IN | $1,250 – $4,050 | $2,650 | −3% |
| Lafayette, IN | $1,200 – $4,000 | $2,600 | −4% |
| Fort Wayne, IN | $1,200 – $4,000 | $2,600 | −4% |
Why two Indiana quotes can differ
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
When Indiana weather lets you install
Weather decides when exterior installation can happen, and Indiana is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.
Evansville has the longest comfortable season of the metros we cover in Indiana at 11 months (February through December); Terre Haute has the shortest at 9 (March through November). Rainfall runs from 35 inches a year in Elkhart to 49 inches in Bloomington.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Indianapolis | 21 | 85 | 44 | 9: March through November |
| Fort Wayne | 18 | 84 | 39 | 9: March through November |
| Evansville | 26 | 89 | 48 | 11: February through December |
| South Bend | 17 | 83 | 39 | 9: March through November |
| Elkhart | 18 | 83 | 35 | 9: March through November |
| Lafayette | 18 | 84 | 37 | 9: March through November |
| Bloomington | 21 | 85 | 49 | 9: March through November |
| Terre Haute | 21 | 86 | 41 | 9: March through November |
What sheet metal workers and the other trades earn in Indiana
Indiana's labor line is priced from 3 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.05 times the national level.
Sheet metal workers (47-2211), 40% of the weighting: a median of $30.79 an hour, 4% above the US median of $29.71. The middle half of them earn between $23.47 and $43.81 an hour. About 4,580 work in the state. That is 14.3 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
Roofers (47-2181), 30% of the weighting: a median of $27.88 an hour, 5% above the US median of $26.65. The middle half of them earn between $21.79 and $36.64 an hour. About 2,980 work in the state. That is 9.3 per 10,000 jobs, compared with 8.7 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 30%) the local median is $24.07 an hour, which is 6% above the national $22.66. The middle half of them earn between $21.28 and $29.92 an hour. BLS counts 28,600 of them working in the state, 89.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A crew paid at the 75th percentile for sheet metal workers ($43.81 an hour) would add about $180 to the statewide midpoint; one at the 25th percentile ($23.47) would take off about $100. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 3,201,220 jobs across Indiana (May 2025), which is 2.1% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $23.47 | $30.79 | $43.81 | $29.71 | 1.04 | state |
| Roofers (47-2181) | 30% | $21.79 | $27.88 | $36.64 | $26.65 | 1.05 | state |
| Construction laborers (47-2061) | 30% | $21.28 | $24.07 | $29.92 | $22.66 | 1.06 | state |
| Blended | 100% | 1.05 | |||||
Other Indiana jobs that often go with gutters
Each project weights the trades differently, so Indiana's wage level does not push every price by the same amount. Compared with the US midpoint, French drain is +10% and vinyl siding level.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,250 – $12,600 | +1% |
| Metal roof | 2,000 sq ft of roof | $10,400 – $32,500 | +1% |
| Vinyl siding | 2,100 sq ft of wall | $8,400 – $25,200 | level |
| French drain | 60 linear ft | $660 – $2,300 | +10% |
| Attic insulation | 1,000 sq ft | $1,050 – $4,000 | +1% |
Indiana against its neighbors
Indiana ranks 21 of 51 (the 50 states plus DC) for gutters, where 1 is the most expensive. The costliest is Hawaii at $3,400 and the cheapest Arkansas at $2,400, both for 160 linear ft at the midpoint. Indiana sits at $2,700. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Kentucky | 140 miles away | $1,200 – $4,000 | $2,600 | −4% |
| Illinois | 140 miles away | $1,550 – $4,850 | $3,200 | +17% |
| Ohio | 180 miles away | $1,300 – $4,200 | $2,750 | +1% |
| Michigan | 220 miles away | $1,300 – $4,150 | $2,750 | +1% |
| Wisconsin | 260 miles away | $1,350 – $4,300 | $2,850 | +4% |
Basic, standard or premium: Indiana prices
Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,300 to $2,400
Vinyl or sectional aluminum, single story
Standard
$2,150 to $3,300
Seamless aluminum K-style, standard downspouts
Premium
$3,000 to $4,150
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $960 – $1,850 | $1,600 – $2,500 | $2,300 – $3,150 |
| average house (160 linear ft) | $1,300 – $2,400 | $2,150 – $3,300 | $3,000 – $4,150 |
| large house (240 linear ft) | $1,900 – $3,600 | $3,200 – $4,850 | $4,450 – $6,100 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,150 to $3,300 for Indiana is attached.
Detailed gutters report for Indiana, $9
Multi-page report for Indiana: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Indiana: your questions
+How much does it cost to install gutters in Indiana?
$1,300 to $4,150 for 160 linear ft, using statewide wages and prices. Metro areas inside Indiana can sit above or below that.
+Which city in Indiana is cheapest for gutters?
Fort Wayne at about $2,600 (midpoint, 160 linear ft). The priciest is South Bend at $2,850.
+Is gutters cheaper in Indiana than the US average?
It is 1% cheaper: $2,700 against $2,750 for 160 linear ft at the midpoint.
+What share of the price is labor in Indiana?
About 40% ($1,100). Materials are 56%. Statewide labor for this job is weighted 1.05x the national wage level.
+What do sheet metal workers earn in Indiana?
The BLS statewide median is $30.79 an hour, against $29.71 for the US. The 25th to 75th percentile range is $23.47 to $43.81.
+Where does Indiana rank for gutters costs?
21st most expensive of 51 (the 50 states plus DC) at the midpoint, $2,700 for 160 linear ft. Rank 1 is the costliest.
+What do basic and premium gutters work cost in Indiana?
For 160 linear ft, basic work runs $1,300 to $2,400 and premium work $3,000 to $4,150. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+Does the season matter for gutters in Indiana?
Yes where winters or summers are hard. Of the Indiana metros we cover, Evansville has the most comfortable months (11 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
Gutters by city in Indiana
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.