Vinyl siding cost in Indiana
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (2,100 sq ft of wall)
- $8,400 – $25,200
- Per sq ft of wall
- $4 – $12
- before permit
- Versus US midpoint
- Level
- US $16,800
- Metros covered
- 8
Across Indiana, new vinyl siding costs about $8,400 to $25,200 for 2,100 sq ft of wall. Statewide, that midpoint is 0% above the US figure of $16,800. Carpenters earn a median $30.23 an hour in Indiana (US: $29.12).
Inside Indiana, the metros we cover range from $16,300 (Fort Wayne) to $17,200 (Evansville) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Indiana (statewide), standard level
$13,400 to $20,200
About $6.40 to $9.60 per sq ft of wall before permits. Labor is about 52% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,400 | $9,650 |
| Labor | $7,000 | $10,500 |
| Permits and fees | $0 | $0 |
| Total | $13,400 | $20,200 |
Cost breakdown for 2,100 sq ft of wall in Indiana
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,000 | $8,000 | $12,000 | 48% |
| Labor | $4,400 | $8,800 | $13,200 | 52% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,400 | $16,800 | $25,200 | 100% |
Other Indiana jobs that often go with vinyl siding
The table prices neighboring jobs at their usual sizes using statewide Indiana wages and prices. Against national midpoints, roof replacement comes out highest (+1%) and window replacement lowest (−2%), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,250 – $12,600 | +1% |
| Gutters | 160 linear ft | $1,300 – $4,150 | −1% |
| Window replacement | 10 windows | $4,450 – $14,700 | −2% |
| Attic insulation | 1,000 sq ft | $1,050 – $4,000 | +1% |
| Metal roof | 2,000 sq ft of roof | $10,400 – $32,500 | +1% |
Indiana versus the states around it
Indiana ranks 20 of 51 (the 50 states plus DC) for vinyl siding, where 1 is the most expensive. The costliest is Hawaii at $21,900 and the cheapest Arkansas at $14,500, both for 2,100 sq ft of wall at the midpoint. Indiana sits at $16,800. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Kentucky | 140 miles away | $7,850 – $23,600 | $15,700 | −6% |
| Illinois | 140 miles away | $9,850 – $29,600 | $19,700 | +17% |
| Ohio | 180 miles away | $8,450 – $25,400 | $16,900 | +1% |
| Michigan | 220 miles away | $8,350 – $25,100 | $16,700 | level |
| Wisconsin | 260 miles away | $8,550 – $25,700 | $17,100 | +2% |
When Indiana weather lets you install
Season matters for vinyl siding. For each Indiana metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for exterior installation.
Evansville has the longest comfortable season of the metros we cover in Indiana at 11 months (February through December); Terre Haute has the shortest at 9 (March through November). Rainfall runs from 35 inches a year in Elkhart to 49 inches in Bloomington.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Indianapolis | 21 | 85 | 44 | 9: March through November |
| Fort Wayne | 18 | 84 | 39 | 9: March through November |
| Evansville | 26 | 89 | 48 | 11: February through December |
| South Bend | 17 | 83 | 39 | 9: March through November |
| Elkhart | 18 | 83 | 35 | 9: March through November |
| Lafayette | 18 | 84 | 37 | 9: March through November |
| Bloomington | 21 | 85 | 49 | 9: March through November |
| Terre Haute | 21 | 86 | 41 | 9: March through November |
Indiana labor market for vinyl siding
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.05 for Indiana.
For carpenters (47-2031, weighted 60%) the local median is $30.23 an hour, which is 4% above the national $29.12. The middle half of them earn between $24.01 and $36.95 an hour. BLS counts 15,240 of them working in the state, 47.6 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 30% of the weighting: a median of $24.07 an hour, 6% above the US median of $22.66. The middle half of them earn between $21.28 and $29.92 an hour. About 28,600 work in the state. That is 89.3 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For sheet metal workers (47-2211, weighted 10%) the local median is $30.79 an hour, which is 4% above the national $29.71. The middle half of them earn between $23.47 and $43.81 an hour. BLS counts 4,580 of them working in the state, 14.3 for every 10,000 jobs (US: 7.7), so the local bench is deeper than average.
A crew paid at the 75th percentile for carpenters ($36.95 an hour) would add about $1,150 to the statewide midpoint; one at the 25th percentile ($24.01) would take off about $1,100. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 3,201,220 jobs across Indiana (May 2025), which is 2.1% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $24.01 | $30.23 | $36.95 | $29.12 | 1.04 | state |
| Construction laborers (47-2061) | 30% | $21.28 | $24.07 | $29.92 | $22.66 | 1.06 | state |
| Sheet metal workers (47-2211) | 10% | $23.47 | $30.79 | $43.81 | $29.71 | 1.04 | state |
| Blended | 100% | 1.05 | |||||
Quality levels and sizes in Indiana
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Indiana wages and prices. The grid prices the same bands at 3 common sizes.
Basic
$8,400 to $15,100
Basic clapboard siding, simple house
Standard
$13,400 to $20,200
Mid-grade panels, standard trim and corners
Premium
$18,500 to $25,200
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,800 – $8,650 | $7,700 – $11,500 | $10,600 – $14,400 |
| average house (2,100 sq ft of wall) | $8,400 – $15,100 | $13,400 – $20,200 | $18,500 – $25,200 |
| large house (3,000 sq ft of wall) | $12,000 – $21,600 | $19,200 – $28,800 | $26,400 – $36,000 |
Which Indiana city is cheapest for vinyl siding?
2 of the 8 metros sit above the statewide midpoint of $16,800, and the top-to-bottom gap is 5%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (2,100 sq ft of wall) | Midpoint | vs. state |
|---|---|---|---|
| Evansville, IN | $8,600 – $25,700 | $17,200 | +2% |
| Indianapolis, IN | $8,500 – $25,400 | $17,000 | +1% |
| South Bend, IN | $8,450 – $25,300 | $16,900 | level |
| Elkhart, IN | $8,400 – $25,100 | $16,800 | level |
| Lafayette, IN | $8,350 – $25,000 | $16,700 | −1% |
| Bloomington, IN | $8,250 – $24,800 | $16,500 | −2% |
| Terre Haute, IN | $8,200 – $24,600 | $16,400 | −2% |
| Fort Wayne, IN | $8,150 – $24,500 | $16,300 | −3% |
Vinyl siding: what moves the price in Indiana
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,400 to $20,200 for Indiana is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl siding numbers for Indiana line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Indiana: your questions
+How much does it cost to install vinyl siding in Indiana?
$8,400 to $25,200 for 2,100 sq ft of wall, using statewide wages and prices. Metro areas inside Indiana can sit above or below that.
+Which city in Indiana is cheapest for vinyl siding?
Fort Wayne at about $16,300 (midpoint, 2,100 sq ft of wall). The priciest is Evansville at $17,200.
+Is vinyl siding cheaper in Indiana than the US average?
It is 0% more expensive: $16,800 against $16,800 for 2,100 sq ft of wall at the midpoint.
+What share of the price is labor in Indiana?
About 52% ($8,800). Materials are 48%. Statewide labor for this job is weighted 1.05x the national wage level.
+What do carpenters earn in Indiana?
The BLS statewide median is $30.23 an hour, against $29.12 for the US. The 25th to 75th percentile range is $24.01 to $36.95.
+Where does Indiana rank for vinyl siding costs?
20th most expensive of 51 (the 50 states plus DC) at the midpoint, $16,800 for 2,100 sq ft of wall. Rank 1 is the costliest.
+What do basic and premium vinyl siding work cost in Indiana?
For 2,100 sq ft of wall, basic work runs $8,400 to $15,100 and premium work $18,500 to $25,200. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+Does the season matter for vinyl siding in Indiana?
Yes where winters or summers are hard. Of the Indiana metros we cover, Evansville has the most comfortable months (11 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
Vinyl siding by city in Indiana
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.