Skip to content
CostLocal

Vinyl siding cost in Indianapolis, IN

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (2,100 sq ft of wall)
$8,500 – $25,400
Per sq ft of wall
$4.05 – $12
before permit
Versus US midpoint
+1%
US $16,800
Rank of 300 metros
#95
1 = most expensive

Local price for new vinyl siding in the Indianapolis area: $8,500 to $25,400 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $31.28 an hour in the Indianapolis area, 7% above the US median of $29.12.

Estimate your vinyl siding cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Mid-grade panels, standard trim and corners

Estimated cost for 2,100 sq ft of wall in Indianapolis, IN, standard level

$13,600 to $20,400

About $6.45 to $9.70 per sq ft of wall before permits. Labor is about 53% of the bill.

Cost breakdown
PartLowHigh
Materials$6,350$9,500
Labor$7,250$10,800
Permits and fees$0$0
Total$13,600$20,400
Save and get a PDF report

Cost breakdown for 2,100 sq ft of wall in Indianapolis, IN

Part of the jobLowMidpointHighShare
Materials$3,950$7,900$11,90047%
Labor$4,500$9,050$13,60053%
Permits and fees$0$0$00%
Total$8,500$17,000$25,400100%

What is behind the Indianapolis number

Labor is 53% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Indianapolis the blended ratio comes out at 1.08.

Materials are scaled with BEA's regional price parity for goods. Indianapolis is at 94.3 against 100 for the US, so a materials line of $8,400 nationally becomes $7,900 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 95.7: $0 to $0.

Specs and site conditions that change a Indianapolis bid

  • Style

    Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).

  • Old siding removal

    Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.

  • Labor and season

    Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.

Indianapolis: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Indianapolis. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).

Basic

$8,500 to $15,300

Basic clapboard siding, simple house

Standard

$13,600 to $20,400

Mid-grade panels, standard trim and corners

Premium

$18,700 to $25,400

Premium or board-and-batten, many corners and gables

Cost by size and quality level
SizeBasicStandardPremium
small house (1,200 sq ft of wall)$4,850 – $8,700$7,750 – $11,600$10,700 – $14,500
average house (2,100 sq ft of wall)$8,500 – $15,300$13,600 – $20,400$18,700 – $25,400
large house (3,000 sq ft of wall)$12,100 – $21,800$19,400 – $29,100$26,700 – $36,300

Who does the work: Indianapolis trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Indianapolis the blend is 1.08.

Carpenters (47-2031), 60% of the weighting: a median of $31.28 an hour, 7% above the US median of $29.12. The middle half of them earn between $25.02 and $37.14 an hour. About 4,960 work in the metro. That is 44.9 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.

For construction laborers (47-2061, weighted 30%) the local median is $24.54 an hour, which is 8% above the national $22.66. The middle half of them earn between $22.00 and $30.09 an hour. BLS counts 9,840 of them working in the area, 89.0 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

Sheet metal workers (47-2211), 10% of the weighting: a median of $31.66 an hour, 7% above the US median of $29.71. The middle half of them earn between $25.82 and $44.46 an hour. About 1,480 work in the metro. That is 13.4 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,000 to the midpoint estimate; the 25th percentile takes off about $1,100. That is a swing of roughly 6.4% to 6.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Indianapolis-Carmel-Greenwood has 1,105,170 jobs in total (BLS, May 2025), ranking 31st by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$25.02$31.28$37.14$29.121.07metro
Construction laborers (47-2061)30%$22.00$24.54$30.09$22.661.08metro
Sheet metal workers (47-2211)10%$25.82$31.66$44.46$29.711.07metro
Blended100%1.08

What nearby projects cost in Indianapolis

Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Indianapolis wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+3%) and roof replacement lowest (−5%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,800 – $11,900−5%
Gutters160 linear ft$1,250 – $4,100−2%
Window replacement10 windows$4,450 – $14,600−2%
Attic insulation1,000 sq ft$1,050 – $4,100+3%
Metal roof2,000 sq ft of roof$9,800 – $31,100−4%

Is Indianapolis cheap or dear? The local comparison

Of the five closest metros, all are cheaper than Indianapolis. Fort Wayne is the lowest at about $16,300 (midpoint, 2,100 sq ft of wall), 95 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Indianapolis, INthis page$8,500 – $25,400$17,000
Bloomington, IN50 miles$8,250 – $24,800$16,500−3%
Lafayette, IN65 miles$8,350 – $25,000$16,700−2%
Terre Haute, IN70 miles$8,200 – $24,600$16,400−3%
Fort Wayne, IN95 miles$8,150 – $24,500$16,300−4%
Cincinnati, OH100 miles$8,400 – $25,200$16,800−1%
Indiana (statewide)$8,400 – $25,200$16,800−1%
United States$8,400 – $25,200$16,800−1%

Out of the 300 metros we cover, Indianapolis ranks #95 for the cost of this job (#1 is the most expensive). Statewide, Indianapolis is 1% above the Indiana figure.

Elsewhere in Indiana

Indiana metros compared with Indianapolis
MetroSizeRangeMidpointvs. here
Fort Wayne, IN225,520 jobs$8,150 – $24,500$16,300−4%
Evansville, IN135,250 jobs$8,600 – $25,700$17,200+1%
South Bend, IN131,670 jobs$8,450 – $25,300$16,900−1%
Elkhart, IN127,730 jobs$8,400 – $25,100$16,800−1%
Lafayette, IN102,200 jobs$8,350 – $25,000$16,700−2%
Bloomington, IN73,240 jobs$8,250 – $24,800$16,500−3%

Metros of a similar size

Big cities and small ones price differently, so here is Indianapolis against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Columbus, OH1,105,580 jobs$8,850 – $26,500$17,700+4%
Cincinnati, OH1,101,030 jobs$8,400 – $25,200$16,800−1%
Pittsburgh, PA1,114,490 jobs$8,500 – $25,600$17,000level
Nashville, TN1,099,300 jobs$8,000 – $24,100$16,000−5%

The best months for vinyl siding in Indianapolis

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Indianapolis (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Indianapolis are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.

In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Indianapolis gets about 44 inches of precipitation in a normal year, including roughly 26 inches of snow. The wettest months are May, June and July (5.0 inches in June). Inside the workable window, August and September are the driest, at 3.2 and 3.1 inches. The station averages about 20 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Indianapolis (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan36213.1Cold
Feb41242.4Cold
Mar52333.7Workable
Apr64434.3Workable
May73544.8Workable
Jun82635.0Workable
Jul85664.4Workable
Aug84653.2Workable
Sep78573.1Workable
Oct66463.2Workable
Nov52353.5Workable
Dec40262.9Cold

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,600 to $20,400 for Indianapolis, IN is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Indianapolis, IN: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Vinyl siding in Indianapolis: your questions

+How much does it cost to install vinyl siding in Indianapolis?

For 2,100 sq ft of wall, expect $8,500 to $25,400 in the Indianapolis area. A standard-spec job lands at $13,600 to $20,400. Small jobs usually cost more per sq ft of wall and large ones less.

+What is the price per sq ft of wall for vinyl siding in Indianapolis?

About $4.05 to $12 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.

+Is vinyl siding cheaper in Indianapolis or Bloomington?

Bloomington is 50 miles away. The midpoint for 2,100 sq ft of wall there is $16,500, which is 3% less than Indianapolis ($17,000). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Indianapolis?

About 53% at the midpoint, or $9,050 out of $17,000. Materials are 47% and permits 0%. Nationally, labor is 50%.

+What would average house (2,100 sq ft of wall) cost in Indianapolis?

$8,500 to $25,400. Pick a different size in the estimator above to get your own number.

+Does vinyl siding need a permit in Indianapolis?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Indianapolis area (our national range of $0 to $0 scaled by the local price level).

+Is Indianapolis expensive for vinyl siding compared with the rest of Indiana?

Indianapolis is 1% above the Indiana statewide estimate ($16,800 at the midpoint). We cover 8 metros in Indiana; see the state page to compare them.

+What do carpenters earn in Indianapolis?

The BLS median is $31.28 an hour in the Indianapolis area, compared with $29.12 nationally. The 25th to 75th percentile range is $25.02 to $37.14.

+What do basic and premium vinyl siding work cost in Indianapolis?

For 2,100 sq ft of wall, basic work runs $8,500 to $15,300 and premium work $18,700 to $25,400. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.

+When is the best time to install vinyl siding in Indianapolis?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. August and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Vinyl siding near Indianapolis

Vinyl siding: all pricesVinyl siding in IndianaAll projects in IndianapolisIndiana cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.