Skip to content
CostLocal

Attic insulation cost in Indiana

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (1,000 sq ft)
$1,050 – $4,000
Per sq ft
$1.05 – $4
before permit
Versus US midpoint
+1%
US $2,500
Metros covered
8

What does it cost to insulate an attic in Indiana? Plan on $1,050 to $4,000 for 1,000 sq ft. Wages (1.10x the US blend), materials (price index 95.5) and permit costs (93.3) put the state above the national midpoint by 1%.

Inside Indiana, the metros we cover range from $2,350 (Fort Wayne) to $2,550 (Indianapolis) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in Indiana (statewide), standard level

$1,900 to $3,100

About $1.90 to $3.10 per sq ft before permits. Labor is about 39% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$1,950
Labor$820$1,150
Permits and fees$0$0
Total$1,900$3,100
Save and get a PDF report

Cost breakdown for 1,000 sq ft in Indiana

Part of the jobLowMidpointHighShare
Materials$480$1,550$2,60061%
Labor$550$990$1,45039%
Permits and fees$0$0$00%
Total$1,050$2,500$4,000100%

Indiana versus the states around it

Indiana ranks 20 of 51 (the 50 states plus DC) for attic insulation, where 1 is the most expensive. The costliest is Washington at $2,900 and the cheapest West Virginia at $2,250, both for 1,000 sq ft at the midpoint. Indiana sits at $2,500. The five states closest by workforce center are listed below.

States near Indiana, same project and size
StateDistanceRangeMidpointvs. here
Kentucky140 miles away$980 – $3,900$2,450−3%
Illinois140 miles away$1,100 – $4,250$2,650+6%
Ohio180 miles away$1,050 – $4,050$2,550+2%
Michigan220 miles away$960 – $3,850$2,400−4%
Wisconsin260 miles away$990 – $3,900$2,450−3%

Why two Indiana quotes can differ

  • Type of insulation

    Blown-in is $0.90-$2.40 per sq ft and loose-fill is $1.00-$2.50 installed; spray foam costs more (HomeGuide).

  • Job size

    Small attics start around $500 and large ones go up to $6,000 (HomeGuide).

  • Air sealing and fixture damming

    Sealing gaps and damming around recessed lights are part of what moves the price within a type.

  • Removing old insulation

    Old, wet or pest-damaged insulation has to come out first, at extra cost.

Indiana labor market for attic insulation

Indiana's labor line is priced from 2 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.10 times the national level.

For insulation workers, floor, ceiling and wall (47-2131, weighted 80%) the local median is $26.26 an hour, which is 11% above the national $23.62. The middle half of them earn between $21.70 and $29.96 an hour. BLS counts 780 of them working in the state, 2.4 for every 10,000 jobs (US: 2.9), so the local bench is about average.

For construction laborers (47-2061, weighted 20%) the local median is $24.07 an hour, which is 6% above the national $22.66. The middle half of them earn between $21.28 and $29.92 an hour. BLS counts 28,600 of them working in the state, 89.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

A crew paid at the 75th percentile for insulation workers, floor, ceiling and wall ($29.96 an hour) would add about $110 to the statewide midpoint; one at the 25th percentile ($21.70) would take off about $140. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 3,201,220 jobs across Indiana (May 2025), which is 2.1% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$21.70$26.26$29.96$23.621.11state
Construction laborers (47-2061)20%$21.28$24.07$29.92$22.661.06state
Blended100%1.10

Basic, standard or premium: Indiana prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from small attic (600 sq ft) to large attic (1,800 sq ft).

Basic

$1,050 to $2,200

Blown-in fiberglass or cellulose to code R-value

Standard

$1,900 to $3,100

Higher R-value with air sealing around fixtures

Premium

$2,800 to $4,000

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$620 – $1,350$1,150 – $1,850$1,700 – $2,400
average attic (1,000 sq ft)$1,050 – $2,200$1,900 – $3,100$2,800 – $4,000
large attic (1,800 sq ft)$1,850 – $4,000$3,450 – $5,600$5,050 – $7,200

Which Indiana city is cheapest for attic insulation?

1 of the 8 metros sit above the statewide midpoint of $2,500, and the top-to-bottom gap is 9%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (1,000 sq ft)Midpointvs. state
Indianapolis, IN$1,050 – $4,100$2,550+2%
Evansville, IN$1,050 – $4,000$2,500level
South Bend, IN$1,000 – $4,000$2,500−1%
Lafayette, IN$1,000 – $4,000$2,500−1%
Bloomington, IN$1,000 – $3,950$2,500−1%
Elkhart, IN$1,000 – $3,950$2,500−1%
Terre Haute, IN$1,000 – $3,950$2,500−1%
Fort Wayne, IN$940 – $3,750$2,350−7%

Other Indiana jobs that often go with attic insulation

Each project weights the trades differently, so Indiana's wage level does not push every price by the same amount. Compared with the US midpoint, roof replacement is +1% and window replacement −2%.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$6,250 – $12,600+1%
Metal roof2,000 sq ft of roof$10,400 – $32,500+1%
Vinyl siding2,100 sq ft of wall$8,400 – $25,200level
Window replacement10 windows$4,450 – $14,700−2%
Gutters160 linear ft$1,300 – $4,150−1%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,900 to $3,100 for Indiana is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Indiana: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in Indiana: your questions

+How much does it cost to insulate an attic in Indiana?

$1,050 to $4,000 for 1,000 sq ft, using statewide wages and prices. Metro areas inside Indiana can sit above or below that.

+Which city in Indiana is cheapest for attic insulation?

Fort Wayne at about $2,350 (midpoint, 1,000 sq ft). The priciest is Indianapolis at $2,550.

+Is attic insulation cheaper in Indiana than the US average?

It is 1% more expensive: $2,500 against $2,500 for 1,000 sq ft at the midpoint.

+What share of the price is labor in Indiana?

About 39% ($990). Materials are 61%. Statewide labor for this job is weighted 1.10x the national wage level.

+What do insulation workers, floor, ceiling and wall earn in Indiana?

The BLS statewide median is $26.26 an hour, against $23.62 for the US. The 25th to 75th percentile range is $21.70 to $29.96.

+Where does Indiana rank for attic insulation costs?

20th most expensive of 51 (the 50 states plus DC) at the midpoint, $2,500 for 1,000 sq ft. Rank 1 is the costliest.

+What do basic and premium attic insulation work cost in Indiana?

For 1,000 sq ft, basic work runs $1,050 to $2,200 and premium work $2,800 to $4,000. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation by city in Indiana

Attic insulation: all pricesIndiana cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.