Skip to content
CostLocal

Attic insulation cost in Evansville, IN

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1,000 sq ft)
$1,050 – $4,000
Per sq ft
$1.05 – $4
before permit
Versus US midpoint
+1%
US $2,500
Rank of 300 metros
#96
1 = most expensive

If you want to insulate an attic in Evansville, plan on $1,050 to $4,000 for 1,000 sq ft, all in. Per sq ft, that is $1.05 to $4 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Insulation workers, floor, ceiling and wall earn a median of $26.26 an hour in the Evansville area, 11% above the US median of $23.62.

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in Evansville, IN, standard level

$1,900 to $3,100

About $1.90 to $3.10 per sq ft before permits. Labor is about 40% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$1,900
Labor$830$1,200
Permits and fees$0$0
Total$1,900$3,100
Save and get a PDF report

Cost breakdown for 1,000 sq ft in Evansville, IN

Part of the jobLowMidpointHighShare
Materials$470$1,500$2,55060%
Labor$560$1,000$1,45040%
Permits and fees$0$0$00%
Total$1,050$2,500$4,000100%

Where the Evansville price comes from

The wage side of the estimate leans on insulation workers, floor, ceiling and wall, who do 80% of the hours on a typical job. Their local median is $26.26 an hour. Add the other trades involved and the blended wage index for Evansville is 1.12 (US = 1.00), which puts labor at 40% of the total. BLS does not publish this trade for the metro, so we used the Indiana statewide median.

On the materials line, the BEA goods price index for the Evansville metro is 94.3 (US = 100). The midpoint materials bill for 1,000 sq ft comes to $1,500, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (91.5) and land at $0 to $0.

Data note: 80% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Evansville. The wage table below marks each row.

Specs and site conditions that change a Evansville bid

  • Removing old insulation

    Old, wet or pest-damaged insulation has to come out first, at extra cost.

  • Type of insulation

    Blown-in is $0.90-$2.40 per sq ft and loose-fill is $1.00-$2.50 installed; spray foam costs more (HomeGuide).

  • Job size

    Small attics start around $500 and large ones go up to $6,000 (HomeGuide).

Evansville: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Evansville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$1,050 to $2,200

Blown-in fiberglass or cellulose to code R-value

Standard

$1,900 to $3,100

Higher R-value with air sealing around fixtures

Premium

$2,800 to $4,000

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$620 – $1,350$1,150 – $1,850$1,700 – $2,400
average attic (1,000 sq ft)$1,050 – $2,200$1,900 – $3,100$2,800 – $4,000
large attic (1,800 sq ft)$1,850 – $4,000$3,450 – $5,600$5,050 – $7,200

What nearby projects cost in Evansville

Because every project leans on different trades, Evansville's wage level does not move all prices equally. Against the US midpoint, metal roof runs +4% and window replacement −3%.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$6,400 – $12,800+3%
Metal roof2,000 sq ft of roof$10,900 – $33,300+4%
Vinyl siding2,100 sq ft of wall$8,600 – $25,700+2%
Window replacement10 windows$4,400 – $14,500−3%
Gutters160 linear ft$1,350 – $4,250+2%

Evansville labor market for attic insulation

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Evansville is 1.12 times the national level.

Insulation workers, floor, ceiling and wall (47-2131) carry 80% of the labor weighting. BLS does not publish this trade for the Evansville metro, so we used the Indiana statewide median: $26.26 an hour against $23.62 for the US. The middle half of them earn between $21.70 and $29.96 an hour.

Construction laborers (47-2061), 20% of the weighting: a median of $25.59 an hour, 13% above the US median of $22.66. The middle half of them earn between $21.29 and $29.38 an hour. About 1,500 work in the metro. That is 110.9 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

Quotes come from real crews, not medians. If the insulation workers, floor, ceiling and wall on your job are paid at the 75th percentile ($29.96 an hour) instead of the median, the labor line grows by about $110. At the 25th percentile ($21.70) it shrinks by about $140. The total moves by 4.5% or 5.5%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 135,250 jobs in the Evansville area. That makes it the 162nd largest of the 300 metros we cover, with 0.09% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$21.70$26.26$29.96$23.621.11state
Construction laborers (47-2061)20%$21.29$25.59$29.38$22.661.13metro
Blended100%1.12

Is Evansville cheap or dear? The local comparison

Same job, same size (1,000 sq ft), priced for the nearest metros. Louisville is the priciest of the group at $2,550. Clarksville is the cheapest at $2,400.

Comparison with nearby areas
AreaRangeMidpointvs. here
Evansville, INthis page$1,050 – $4,000$2,500
Clarksville, TN95 miles$960 – $3,850$2,400−4%
Terre Haute, IN95 miles$1,000 – $3,950$2,500−1%
Bowling Green, KY95 miles$970 – $3,900$2,450−3%
Bloomington, IN95 miles$1,000 – $3,950$2,500−1%
Louisville, KY105 miles$1,050 – $4,050$2,550+1%
Indiana (statewide)$1,050 – $4,000$2,500level
United States$1,000 – $4,000$2,500−1%

Across 300 US metros, Evansville comes in at #96 from the top. The priciest is San Francisco, CA at $3,150; the cheapest is Morgantown, WV at $2,250 (midpoints, 1,000 sq ft). Statewide, Evansville is 0% below the Indiana figure.

Other Indiana metros

Indiana metros compared with Evansville
MetroSizeRangeMidpointvs. here
Indianapolis, IN1,105,170 jobs$1,050 – $4,100$2,550+2%
Fort Wayne, IN225,520 jobs$940 – $3,750$2,350−6%
South Bend, IN131,670 jobs$1,000 – $4,000$2,500level
Elkhart, IN127,730 jobs$1,000 – $3,950$2,500−1%
Lafayette, IN102,200 jobs$1,000 – $4,000$2,500level
Bloomington, IN73,240 jobs$1,000 – $3,950$2,500−1%

Cities with a workforce like Evansville's

Big cities and small ones price differently, so here is Evansville against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Rockford, IL137,650 jobs$1,000 – $3,900$2,450−2%
Flint, MI135,040 jobs$970 – $3,850$2,400−5%
Cedar Rapids, IA139,260 jobs$1,050 – $4,000$2,500level
College Station, TX134,040 jobs$940 – $3,750$2,350−6%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,900 to $3,100 for Evansville, IN is attached.

Detailed attic insulation report for Evansville, IN, $9

The report lays out the attic insulation numbers for Evansville, IN line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in Evansville: your questions

+How much does it cost to insulate an attic in Evansville?

For 1,000 sq ft, expect $1,050 to $4,000 in the Evansville area. A standard-spec job lands at $1,900 to $3,100. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for attic insulation in Evansville?

About $1.05 to $4 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $1 to $4.

+Is attic insulation cheaper in Evansville or Clarksville?

Clarksville is 95 miles away. The midpoint for 1,000 sq ft there is $2,400, which is 4% less than Evansville ($2,500). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Evansville?

About 40% at the midpoint, or $1,000 out of $2,500. Materials are 60% and permits 0%. Nationally, labor is 36%.

+What would average attic (1,000 sq ft) cost in Evansville?

$1,050 to $4,000. Pick a different size in the estimator above to get your own number.

+Does attic insulation need a permit in Evansville?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Evansville area (our national range of $0 to $0 scaled by the local price level).

+Is Evansville expensive for attic insulation compared with the rest of Indiana?

Evansville is 0% below the Indiana statewide estimate ($2,500 at the midpoint). We cover 8 metros in Indiana; see the state page to compare them.

+What do insulation workers, floor, ceiling and wall earn in Evansville?

BLS has no published metro figure here, so we use the statewide median of $26.26 an hour, compared with $23.62 nationally. The 25th to 75th percentile range is $21.70 to $29.96.

+What do basic and premium attic insulation work cost in Evansville?

For 1,000 sq ft, basic work runs $1,050 to $2,200 and premium work $2,800 to $4,000. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation near Evansville

Attic insulation: all pricesAttic insulation in IndianaAll projects in EvansvilleIndiana cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.