Gutters cost in Fort Wayne, IN
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,200 – $4,000
- Per linear ft
- $7.65 – $24
- before permit
- Versus US midpoint
- −5%
- US $2,750
- Rank of 300 metros
- #164
- 1 = most expensive
Local price for new gutters in the Fort Wayne area: $1,200 to $4,000 for 160 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% lower than the US figure. Building materials run about 6% below the US average here (BEA goods price index 94.3).
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Fort Wayne, IN, standard level
$2,050 to $3,150
About $12.50 to $19 per linear ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,850 |
| Labor | $850 | $1,150 |
| Permits and fees | $55 | $130 |
| Total | $2,050 | $3,150 |
Cost breakdown for 160 linear ft in Fort Wayne, IN
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $600 | $1,500 | $2,400 | 58% |
| Labor | $620 | $1,000 | $1,400 | 39% |
| Permits and fees | $0 | $95 | $190 | 4% |
| Total | $1,200 | $2,600 | $4,000 | 100% |
What is behind the Fort Wayne number
Labor is 39% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In Fort Wayne the blended ratio comes out at 0.96.
Materials are scaled with BEA's regional price parity for goods. Fort Wayne is at 94.3 against 100 for the US, so a materials line of $1,600 nationally becomes $1,500 here (midpoint, 160 linear ft). Permits follow the all-items index of 92.6: $0 to $190.
The best months for gutters in Fort Wayne
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Ft Wayne Intl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Fort Wayne are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Fort Wayne gets about 39 inches of precipitation in a normal year, including roughly 34 inches of snow. The wettest months are May, June and July (4.6 inches in May). Inside the workable window, March and October are the driest, at 2.8 and 3.0 inches. The station averages about 16 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 33 | 18 | 2.5 | Cold |
| Feb | 37 | 21 | 2.1 | Cold |
| Mar | 48 | 29 | 2.8 | Workable |
| Apr | 61 | 39 | 3.7 | Workable |
| May | 72 | 50 | 4.6 | Workable |
| Jun | 81 | 60 | 4.5 | Workable |
| Jul | 84 | 64 | 4.0 | Workable |
| Aug | 82 | 61 | 3.8 | Workable |
| Sep | 76 | 53 | 3.0 | Workable |
| Oct | 64 | 43 | 3.0 | Workable |
| Nov | 49 | 33 | 3.0 | Workable |
| Dec | 38 | 24 | 2.5 | Cold |
Who does the work: Fort Wayne trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Fort Wayne the blend is 0.96.
Sheet metal workers (47-2211), 40% of the weighting: a median of $29.53 an hour, in line with the US median of $29.71. The middle half of them earn between $23.39 and $43.53 an hour.
Roofers (47-2181), 30% of the weighting: a median of $23.48 an hour, 12% below the US median of $26.65. The middle half of them earn between $19.20 and $29.78 an hour. About 270 work in the metro. That is 12.0 per 10,000 jobs, compared with 8.7 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $22.83 an hour, which is in line with the national $22.66. The middle half of them earn between $19.33 and $28.67 an hour. BLS counts 1,670 of them working in the area, 74.1 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $200 to the midpoint estimate; the 25th percentile takes off about $85. That is a swing of roughly 3.3% to 7.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Fort Wayne has 225,520 jobs in total (BLS, May 2025), ranking 107th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $23.39 | $29.53 | $43.53 | $29.71 | 0.99 | metro |
| Roofers (47-2181) | 30% | $19.20 | $23.48 | $29.78 | $26.65 | 0.88 | metro |
| Construction laborers (47-2061) | 30% | $19.33 | $22.83 | $28.67 | $22.66 | 1.01 | metro |
| Blended | 100% | 0.96 | |||||
Related projects, priced for Fort Wayne
Jobs that often go together with gutters are priced below at their usual sizes, using the same Fort Wayne wage and price inputs. Compared with national midpoints, French drain comes out highest (+7%) and roof replacement lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,550 – $11,500 | −8% |
| Metal roof | 2,000 sq ft of roof | $9,350 – $30,200 | −7% |
| Vinyl siding | 2,100 sq ft of wall | $8,150 – $24,500 | −3% |
| French drain | 60 linear ft | $640 – $2,250 | +7% |
| Attic insulation | 1,000 sq ft | $940 – $3,750 | −6% |
How Fort Wayne compares
Of the five closest metros, none is cheaper than Fort Wayne. Niles comes closest at about $2,600.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Fort Wayne, INthis page | $1,200 – $4,000 | $2,600 | |
| Elkhart, IN55 miles | $1,250 – $4,050 | $2,650 | +2% |
| South Bend, IN70 miles | $1,350 – $4,300 | $2,850 | +9% |
| Kalamazoo, MI85 miles | $1,350 – $4,300 | $2,800 | +8% |
| Toledo, OH85 miles | $1,350 – $4,250 | $2,800 | +8% |
| Niles, MI95 miles | $1,250 – $4,000 | $2,600 | level |
| Indiana (statewide) | $1,300 – $4,150 | $2,700 | +4% |
| United States | $1,300 – $4,200 | $2,750 | +5% |
Out of the 300 metros we cover, Fort Wayne ranks #164 for the cost of this job (#1 is the most expensive). Statewide, Fort Wayne is 4% below the Indiana figure.
Elsewhere in Indiana
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Indianapolis, IN | 1,105,170 jobs | $1,250 – $4,100 | $2,700 | +3% |
| Evansville, IN | 135,250 jobs | $1,350 – $4,250 | $2,800 | +7% |
| South Bend, IN | 131,670 jobs | $1,350 – $4,300 | $2,850 | +9% |
| Elkhart, IN | 127,730 jobs | $1,250 – $4,050 | $2,650 | +2% |
| Lafayette, IN | 102,200 jobs | $1,200 – $4,000 | $2,600 | level |
| Bloomington, IN | 73,240 jobs | $1,250 – $4,050 | $2,650 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Fort Wayne against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Augusta, GA | 231,930 jobs | $1,100 – $3,800 | $2,450 | −6% |
| Springfield, MO | 223,030 jobs | $1,150 – $3,850 | $2,500 | −3% |
| Trenton, NJ | 240,190 jobs | $1,600 – $4,950 | $3,250 | +25% |
| Deltona, FL | 219,740 jobs | $1,150 – $3,850 | $2,500 | −4% |
Specs and site conditions that change a Fort Wayne bid
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Pick a size, pick a tier: gutters pricing in Fort Wayne
The cited range is split into basic, standard and premium bands, then scaled to Fort Wayne. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,200 to $2,350
Vinyl or sectional aluminum, single story
Standard
$2,050 to $3,150
Seamless aluminum K-style, standard downspouts
Premium
$2,900 to $4,000
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $920 – $1,750 | $1,550 – $2,400 | $2,200 – $3,050 |
| average house (160 linear ft) | $1,200 – $2,350 | $2,050 – $3,150 | $2,900 – $4,000 |
| large house (240 linear ft) | $1,850 – $3,450 | $3,050 – $4,650 | $4,250 – $5,900 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,050 to $3,150 for Fort Wayne, IN is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Fort Wayne, IN: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Fort Wayne: your questions
+How much does it cost to install gutters in Fort Wayne?
For 160 linear ft, expect $1,200 to $4,000 in the Fort Wayne area. A standard-spec job lands at $2,050 to $3,150. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Fort Wayne?
About $7.65 to $24 per linear ft for materials and labor, plus $0 to $190 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Fort Wayne or Elkhart?
Elkhart is 55 miles away. The midpoint for 160 linear ft there is $2,650, which is 2% more than Fort Wayne ($2,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Fort Wayne?
About 39% at the midpoint, or $1,000 out of $2,600. Materials are 58% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Fort Wayne?
$1,200 to $4,000. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Fort Wayne?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $190 for fees in the Fort Wayne area (our national range of $0 to $200 scaled by the local price level).
+Is Fort Wayne expensive for gutters compared with the rest of Indiana?
Fort Wayne is 4% below the Indiana statewide estimate ($2,700 at the midpoint). We cover 8 metros in Indiana; see the state page to compare them.
+What do sheet metal workers earn in Fort Wayne?
The BLS median is $29.53 an hour in the Fort Wayne area, compared with $29.71 nationally. The 25th to 75th percentile range is $23.39 to $43.53.
+What do basic and premium gutters work cost in Fort Wayne?
For 160 linear ft, basic work runs $1,200 to $2,350 and premium work $2,900 to $4,000. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Fort Wayne?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Fort Wayne
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.