Gutters cost in Trenton, NJ
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,600 – $4,950
- Per linear ft
- $10 – $29.50
- before permit
- Versus US midpoint
- +19%
- US $2,750
- Rank of 300 metros
- #8
- 1 = most expensive
If you want to install gutters in Trenton, plan on $1,600 to $4,950 for 160 linear ft, all in. Per linear ft, that is $10 to $29.50 for materials and labor, with the permit on top. The local midpoint runs 19% higher than the national one. Sheet metal workers earn a median of $44.64 an hour in the Trenton area, 50% above the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Trenton, NJ, standard level
$2,600 to $3,950
About $16 to $23.50 per linear ft before permits. Labor is about 48% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,200 | $2,000 |
| Labor | $1,300 | $1,800 |
| Permits and fees | $60 | $140 |
| Total | $2,600 | $3,950 |
Cost breakdown for 160 linear ft in Trenton, NJ
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $640 | $1,600 | $2,550 | 49% |
| Labor | $960 | $1,550 | $2,150 | 48% |
| Permits and fees | $0 | $100 | $210 | 3% |
| Total | $1,600 | $3,250 | $4,950 | 100% |
Where the Trenton price comes from
Labor is 48% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In Trenton the blended ratio comes out at 1.50. BLS does not publish this trade for the metro, so we used the New Jersey statewide median.
On the materials line, the BEA goods price index for the Trenton metro is 99.8 (US = 100). The midpoint materials bill for 160 linear ft comes to $1,600, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (103.2) and land at $0 to $210.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Trenton. The wage table below marks each row.
Pick a size, pick a tier: gutters pricing in Trenton
Three bands are cut from the same cited range and localized for Trenton wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,600 to $2,950
Vinyl or sectional aluminum, single story
Standard
$2,600 to $3,950
Seamless aluminum K-style, standard downspouts
Premium
$3,600 to $4,950
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $1,200 – $2,200 | $1,950 – $3,000 | $2,750 – $3,750 |
| average house (160 linear ft) | $1,600 – $2,950 | $2,600 – $3,950 | $3,600 – $4,950 |
| large house (240 linear ft) | $2,400 – $4,350 | $3,850 – $5,800 | $5,350 – $7,300 |
Trenton labor market for gutters
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Trenton is 1.50 times the national level.
Sheet metal workers (47-2211) carry 40% of the labor weighting. BLS does not publish this trade for the Trenton metro, so we used the New Jersey statewide median: $44.64 an hour against $29.71 for the US. The middle half of them earn between $28.07 and $57.63 an hour.
For roofers (47-2181, weighted 30%) the local median is $39.47 an hour, which is 48% above the national $26.65. The middle half of them earn between $26.89 and $45.35 an hour. BLS counts 140 of them working in the area, 5.8 for every 10,000 jobs (US: 8.7), so the local bench is thinner than average.
Construction laborers (47-2061), 30% of the weighting: a median of $34.58 an hour, 53% above the US median of $22.66. The middle half of them earn between $23.43 and $51.14 an hour. About 960 work in the metro. That is 40.0 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the sheet metal workers on your job are paid at the 75th percentile ($57.63 an hour) instead of the median, the labor line grows by about $180. At the 25th percentile ($28.07) it shrinks by about $230. The total moves by 5.6% or 7.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 240,190 jobs in the Trenton-Princeton area. That makes it the 105th largest of the 300 metros we cover, with 0.15% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $28.07 | $44.64 | $57.63 | $29.71 | 1.50 | state |
| Roofers (47-2181) | 30% | $26.89 | $39.47 | $45.35 | $26.65 | 1.48 | metro |
| Construction laborers (47-2061) | 30% | $23.43 | $34.58 | $51.14 | $22.66 | 1.53 | metro |
| Blended | 100% | 1.50 | |||||
Is Trenton cheap or dear? The local comparison
Same job, same size (160 linear ft), priced for the nearest metros. Trenton is the priciest of the group. Reading is the cheapest at $2,750.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Trenton, NJthis page | $1,600 – $4,950 | $3,250 | |
| Philadelphia, PA40 miles | $1,350 – $4,350 | $2,850 | −12% |
| Allentown, PA50 miles | $1,300 – $4,300 | $2,800 | −14% |
| New York, NY55 miles | $1,550 – $4,900 | $3,250 | −1% |
| Reading, PA65 miles | $1,300 – $4,250 | $2,750 | −15% |
| Atlantic City, NJ70 miles | $1,550 – $4,800 | $3,200 | −3% |
| New Jersey (statewide) | $1,600 – $5,000 | $3,300 | +1% |
| United States | $1,300 – $4,200 | $2,750 | −16% |
Across 300 US metros, Trenton comes in at #8 from the top. The priciest is San Francisco, CA at $3,450; the cheapest is Longview, TX at $2,350 (midpoints, 160 linear ft). Statewide, Trenton is 1% below the New Jersey figure.
Other New Jersey metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlantic City, NJ | 168,700 jobs | $1,550 – $4,800 | $3,200 | −3% |
| Vineland, NJ | 62,300 jobs | $1,650 – $5,000 | $3,300 | +1% |
Cities with a workforce like Trenton's
Big cities and small ones price differently, so here is Trenton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Palm Bay, FL | 245,170 jobs | $1,200 – $3,900 | $2,550 | −22% |
| Augusta, GA | 231,930 jobs | $1,100 – $3,800 | $2,450 | −25% |
| Lancaster, PA | 252,230 jobs | $1,250 – $4,200 | $2,750 | −16% |
| Fort Wayne, IN | 225,520 jobs | $1,200 – $4,000 | $2,600 | −20% |
Planning more than one job in Trenton?
Because every project leans on different trades, Trenton's wage level does not move all prices equally. Against the US midpoint, roof replacement runs +30% and attic insulation +6%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $8,250 – $15,900 | +30% |
| Metal roof | 2,000 sq ft of roof | $14,100 – $40,300 | +28% |
| Vinyl siding | 2,100 sq ft of wall | $9,500 – $28,400 | +13% |
| French drain | 60 linear ft | $730 – $2,550 | +22% |
| Attic insulation | 1,000 sq ft | $1,100 – $4,200 | +6% |
Climate in Trenton: timing your gutters job
We use NOAA's 1991-2020 climate normals for Trenton Mercer Co Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Trenton (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Trenton gets about 46 inches of precipitation in a normal year, including roughly 27 inches of snow. The wettest months are June, July and August (4.4 inches in July). Inside the workable window, April and November are the driest, at 3.6 and 3.2 inches. The station averages about 22 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 40 | 24 | 3.3 | Cold |
| Feb | 43 | 26 | 2.6 | Cold |
| Mar | 51 | 33 | 4.0 | Workable |
| Apr | 63 | 42 | 3.6 | Workable |
| May | 72 | 52 | 4.0 | Workable |
| Jun | 81 | 61 | 4.3 | Workable |
| Jul | 86 | 67 | 4.4 | Workable |
| Aug | 84 | 65 | 4.2 | Workable |
| Sep | 77 | 58 | 4.0 | Workable |
| Oct | 66 | 46 | 3.8 | Workable |
| Nov | 55 | 36 | 3.2 | Workable |
| Dec | 44 | 29 | 4.0 | Cold |
Why two Trenton quotes can differ
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,600 to $3,950 for Trenton, NJ is attached.
A detailed PDF report of this estimate, $9
The report lays out the gutters numbers for Trenton, NJ line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Trenton: your questions
+How much does it cost to install gutters in Trenton?
For 160 linear ft, expect $1,600 to $4,950 in the Trenton area. A standard-spec job lands at $2,600 to $3,950. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Trenton?
About $10 to $29.50 per linear ft for materials and labor, plus $0 to $210 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Trenton or Philadelphia?
Philadelphia is 40 miles away. The midpoint for 160 linear ft there is $2,850, which is 12% less than Trenton ($3,250). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Trenton?
About 48% at the midpoint, or $1,550 out of $3,250. Materials are 49% and permits 3%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Trenton?
$1,600 to $4,950. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Trenton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $210 for fees in the Trenton area (our national range of $0 to $200 scaled by the local price level).
+Is Trenton expensive for gutters compared with the rest of New Jersey?
Trenton is 1% below the New Jersey statewide estimate ($3,300 at the midpoint). We cover 3 metros in New Jersey; see the state page to compare them.
+What do sheet metal workers earn in Trenton?
BLS has no published metro figure here, so we use the statewide median of $44.64 an hour, compared with $29.71 nationally. The 25th to 75th percentile range is $28.07 to $57.63.
+What do basic and premium gutters work cost in Trenton?
For 160 linear ft, basic work runs $1,600 to $2,950 and premium work $3,600 to $4,950. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Trenton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. April and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Trenton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.