Gutters cost in Philadelphia, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,350 – $4,350
- Per linear ft
- $8.55 – $26
- before permit
- Versus US midpoint
- +5%
- US $2,750
- Rank of 300 metros
- #63
- 1 = most expensive
If you want to install gutters in Philadelphia, plan on $1,350 to $4,350 for 160 linear ft, all in. Per linear ft, that is $8.55 to $26 for materials and labor, with the permit on top. The local midpoint runs 5% higher than the national one. Sheet metal workers earn a median of $37.09 an hour in the Philadelphia area, 25% above the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Philadelphia, PA, standard level
$2,250 to $3,450
About $14 to $21 per linear ft before permits. Labor is about 42% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,200 | $1,900 |
| Labor | $1,050 | $1,400 |
| Permits and fees | $60 | $140 |
| Total | $2,250 | $3,450 |
Cost breakdown for 160 linear ft in Philadelphia, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,500 | 54% |
| Labor | $750 | $1,200 | $1,700 | 42% |
| Permits and fees | $0 | $100 | $210 | 4% |
| Total | $1,350 | $2,850 | $4,350 | 100% |
Why Philadelphia prices look the way they do
Labor is 42% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In Philadelphia the blended ratio comes out at 1.17.
On the materials line, the BEA goods price index for the Philadelphia metro is 96.8 (US = 100). The midpoint materials bill for 160 linear ft comes to $1,550, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (102.6) and land at $0 to $210.
Climate in Philadelphia: timing your gutters job
We use NOAA's 1991-2020 climate normals for Philadelphia Ne Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.
February through December is the stretch where exterior installation runs into the fewest weather problems in Philadelphia (11 of 12 months). January has an average daytime high under 45°F.
In January the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Philadelphia gets about 45 inches of precipitation in a normal year. The wettest months are July, August and September (4.5 inches in September). Inside the workable window, February and November are the driest, at 2.6 and 3.2 inches. The station averages about 29 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 42 | 27 | 3.3 | Cold |
| Feb | 45 | 28 | 2.6 | Workable |
| Mar | 53 | 35 | 4.0 | Workable |
| Apr | 65 | 44 | 3.8 | Workable |
| May | 75 | 54 | 3.6 | Workable |
| Jun | 83 | 64 | 3.9 | Workable |
| Jul | 88 | 69 | 4.3 | Workable |
| Aug | 86 | 68 | 4.2 | Workable |
| Sep | 79 | 60 | 4.5 | Workable |
| Oct | 68 | 48 | 3.6 | Workable |
| Nov | 57 | 38 | 3.2 | Workable |
| Dec | 47 | 31 | 4.0 | Workable |
Philadelphia: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Philadelphia wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,350 to $2,550
Vinyl or sectional aluminum, single story
Standard
$2,250 to $3,450
Seamless aluminum K-style, standard downspouts
Premium
$3,150 to $4,350
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $1,050 – $1,950 | $1,700 – $2,650 | $2,400 – $3,350 |
| average house (160 linear ft) | $1,350 – $2,550 | $2,250 – $3,450 | $3,150 – $4,350 |
| large house (240 linear ft) | $2,050 – $3,800 | $3,400 – $5,150 | $4,700 – $6,450 |
Philadelphia labor market for gutters
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Philadelphia is 1.17 times the national level.
For sheet metal workers (47-2211, weighted 40%) the local median is $37.09 an hour, which is 25% above the national $29.71. The middle half of them earn between $27.31 and $47.94 an hour. BLS counts 1,530 of them working in the area, 5.3 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
For roofers (47-2181, weighted 30%) the local median is $28.72 an hour, which is 8% above the national $26.65. The middle half of them earn between $23.83 and $34.93 an hour. BLS counts 1,530 of them working in the area, 5.3 for every 10,000 jobs (US: 8.7), so the local bench is thinner than average.
Construction laborers (47-2061), 30% of the weighting: a median of $26.50 an hour, 17% above the US median of $22.66. The middle half of them earn between $22.43 and $34.37 an hour. About 14,580 work in the metro. That is 50.3 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the sheet metal workers on your job are paid at the 75th percentile ($47.94 an hour) instead of the median, the labor line grows by about $150. At the 25th percentile ($27.31) it shrinks by about $140. The total moves by 5.3% or 4.8%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 2,897,830 jobs in the Philadelphia-Camden-Wilmington area. That makes it the 7th largest of the 300 metros we cover, with 1.86% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $27.31 | $37.09 | $47.94 | $29.71 | 1.25 | metro |
| Roofers (47-2181) | 30% | $23.83 | $28.72 | $34.93 | $26.65 | 1.08 | metro |
| Construction laborers (47-2061) | 30% | $22.43 | $26.50 | $34.37 | $22.66 | 1.17 | metro |
| Blended | 100% | 1.17 | |||||
Is Philadelphia cheap or dear? The local comparison
Same job, same size (160 linear ft), priced for the nearest metros. Vineland is the priciest of the group at $3,300. Lancaster is the cheapest at $2,750.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Philadelphia, PAthis page | $1,350 – $4,350 | $2,850 | |
| Vineland, NJ40 miles | $1,650 – $5,000 | $3,300 | +15% |
| Trenton, NJ40 miles | $1,600 – $4,950 | $3,250 | +14% |
| Reading, PA50 miles | $1,300 – $4,250 | $2,750 | −4% |
| Lancaster, PA50 miles | $1,250 – $4,200 | $2,750 | −5% |
| Atlantic City, NJ50 miles | $1,550 – $4,800 | $3,200 | +11% |
| Pennsylvania (statewide) | $1,300 – $4,200 | $2,750 | −5% |
| United States | $1,300 – $4,200 | $2,750 | −5% |
Across 300 US metros, Philadelphia comes in at #63 from the top. The priciest is San Francisco, CA at $3,450; the cheapest is Longview, TX at $2,350 (midpoints, 160 linear ft). Statewide, Philadelphia is 5% above the Pennsylvania figure.
Other Pennsylvania metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Pittsburgh, PA | 1,114,490 jobs | $1,250 – $4,200 | $2,750 | −5% |
| Allentown, PA | 377,180 jobs | $1,300 – $4,300 | $2,800 | −2% |
| Harrisburg, PA | 335,010 jobs | $1,300 – $4,200 | $2,750 | −4% |
| Scranton, PA | 255,620 jobs | $1,300 – $4,200 | $2,750 | −5% |
| Lancaster, PA | 252,230 jobs | $1,250 – $4,200 | $2,750 | −5% |
| York, PA | 183,590 jobs | $1,300 – $4,200 | $2,750 | −5% |
Cities with a workforce like Philadelphia's
Big cities and small ones price differently, so here is Philadelphia against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Washington, DC | 3,136,190 jobs | $1,300 – $4,350 | $2,850 | −1% |
| Atlanta, GA | 2,889,670 jobs | $1,200 – $4,050 | $2,650 | −8% |
| Houston, TX | 3,289,720 jobs | $1,200 – $4,000 | $2,600 | −10% |
| Miami, FL | 2,819,940 jobs | $1,250 – $4,150 | $2,700 | −6% |
Specs and site conditions that change a Philadelphia bid
Permit
Local building codes may add $50-$200, though most cities don't require one.
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
What nearby projects cost in Philadelphia
Because every project leans on different trades, Philadelphia's wage level does not move all prices equally. Against the US midpoint, French drain runs +7% and attic insulation level.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,450 – $13,000 | +5% |
| Metal roof | 2,000 sq ft of roof | $11,100 – $33,900 | +6% |
| Vinyl siding | 2,100 sq ft of wall | $8,650 – $25,900 | +3% |
| French drain | 60 linear ft | $640 – $2,250 | +7% |
| Attic insulation | 1,000 sq ft | $1,000 – $4,000 | level |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,250 to $3,450 for Philadelphia, PA is attached.
Detailed gutters report for Philadelphia, PA, $9
The report lays out the gutters numbers for Philadelphia, PA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Philadelphia: your questions
+How much does it cost to install gutters in Philadelphia?
For 160 linear ft, expect $1,350 to $4,350 in the Philadelphia area. A standard-spec job lands at $2,250 to $3,450. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Philadelphia?
About $8.55 to $26 per linear ft for materials and labor, plus $0 to $210 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Philadelphia or Vineland?
Vineland is 40 miles away. The midpoint for 160 linear ft there is $3,300, which is 15% more than Philadelphia ($2,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Philadelphia?
About 42% at the midpoint, or $1,200 out of $2,850. Materials are 54% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Philadelphia?
$1,350 to $4,350. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Philadelphia?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $210 for fees in the Philadelphia area (our national range of $0 to $200 scaled by the local price level).
+Is Philadelphia expensive for gutters compared with the rest of Pennsylvania?
Philadelphia is 5% above the Pennsylvania statewide estimate ($2,750 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do sheet metal workers earn in Philadelphia?
The BLS median is $37.09 an hour in the Philadelphia area, compared with $29.71 nationally. The 25th to 75th percentile range is $27.31 to $47.94.
+What do basic and premium gutters work cost in Philadelphia?
For 160 linear ft, basic work runs $1,350 to $2,550 and premium work $3,150 to $4,350. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Philadelphia?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Philadelphia
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.