Gutters cost in Scranton, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,300 – $4,200
- Per linear ft
- $8 – $25
- before permit
- Versus US midpoint
- Level
- US $2,750
- Rank of 300 metros
- #110
- 1 = most expensive
New gutters in Scranton, PA usually costs $1,300 to $4,200 for 160 linear ft. That works out to about $8 to $25 per linear ft before permits. That is within a few percent of the national midpoint, so there is little local premium or discount. Building materials run about 1% above the US average here (BEA goods price index 100.7).
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Scranton, PA, standard level
$2,150 to $3,350
About $13 to $20 per linear ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,200 | $2,000 |
| Labor | $880 | $1,200 |
| Permits and fees | $55 | $130 |
| Total | $2,150 | $3,350 |
Cost breakdown for 160 linear ft in Scranton, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $640 | $1,600 | $2,600 | 59% |
| Labor | $640 | $1,050 | $1,450 | 38% |
| Permits and fees | $0 | $95 | $190 | 3% |
| Total | $1,300 | $2,750 | $4,200 | 100% |
What is behind the Scranton number
We price the labor side from BLS wage data for 3 trades: sheet metal workers at 40%, roofers at 30%, construction laborers at 30%. Weighted together, Scranton wages are 1.00 times the national level. Labor makes up about 38% of the midpoint estimate (38% at national prices).
Materials are scaled with BEA's regional price parity for goods. Scranton is at 100.7 against 100 for the US, so a materials line of $1,600 nationally becomes $1,600 here (midpoint, 160 linear ft). Permits follow the all-items index of 93.6: $0 to $190.
How Scranton compares
Same job, same size (160 linear ft), priced for the nearest metros. Allentown is the priciest of the group at $2,800. Lancaster is the cheapest at $2,750.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Scranton, PAthis page | $1,300 – $4,200 | $2,750 | |
| Allentown, PA45 miles | $1,300 – $4,300 | $2,800 | +2% |
| Binghamton, NY60 miles | $1,300 – $4,250 | $2,800 | +2% |
| Reading, PA65 miles | $1,300 – $4,250 | $2,750 | +1% |
| Lancaster, PA90 miles | $1,250 – $4,200 | $2,750 | level |
| Harrisburg, PA90 miles | $1,300 – $4,200 | $2,750 | level |
| Pennsylvania (statewide) | $1,300 – $4,200 | $2,750 | level |
| United States | $1,300 – $4,200 | $2,750 | level |
Out of the 300 metros we cover, Scranton ranks #110 for the cost of this job (#1 is the most expensive). Statewide, Scranton is 0% above the Pennsylvania figure.
Elsewhere in Pennsylvania
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $1,350 – $4,350 | $2,850 | +5% |
| Pittsburgh, PA | 1,114,490 jobs | $1,250 – $4,200 | $2,750 | −1% |
| Allentown, PA | 377,180 jobs | $1,300 – $4,300 | $2,800 | +2% |
| Harrisburg, PA | 335,010 jobs | $1,300 – $4,200 | $2,750 | level |
| Lancaster, PA | 252,230 jobs | $1,250 – $4,200 | $2,750 | level |
| York, PA | 183,590 jobs | $1,300 – $4,200 | $2,750 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Scranton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Spokane, WA | 255,820 jobs | $1,400 – $4,500 | $2,950 | +8% |
| Lancaster, PA | 252,230 jobs | $1,250 – $4,200 | $2,750 | level |
| Lakeland, FL | 265,280 jobs | $1,150 – $3,850 | $2,500 | −9% |
| Palm Bay, FL | 245,170 jobs | $1,200 – $3,900 | $2,550 | −7% |
Scranton: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Scranton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,300 to $2,450
Vinyl or sectional aluminum, single story
Standard
$2,150 to $3,350
Seamless aluminum K-style, standard downspouts
Premium
$3,050 to $4,200
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $960 – $1,850 | $1,650 – $2,550 | $2,300 – $3,200 |
| average house (160 linear ft) | $1,300 – $2,450 | $2,150 – $3,350 | $3,050 – $4,200 |
| large house (240 linear ft) | $1,900 – $3,650 | $3,200 – $4,900 | $4,500 – $6,200 |
Scranton weather and the gutters calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Wilkes-Barre Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Scranton are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Scranton gets about 39 inches of precipitation in a normal year, including roughly 45 inches of snow. The wettest months are June, August and September (4.2 inches in September). Inside the workable window, March and November are the driest, at 2.8 and 2.9 inches. The station averages about 12 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 36 | 20 | 2.6 | Cold |
| Feb | 39 | 22 | 2.1 | Cold |
| Mar | 48 | 29 | 2.8 | Workable |
| Apr | 61 | 39 | 3.3 | Workable |
| May | 72 | 50 | 3.3 | Workable |
| Jun | 80 | 58 | 3.8 | Workable |
| Jul | 85 | 63 | 3.6 | Workable |
| Aug | 82 | 61 | 3.9 | Workable |
| Sep | 75 | 54 | 4.2 | Workable |
| Oct | 63 | 43 | 3.7 | Workable |
| Nov | 51 | 34 | 2.9 | Workable |
| Dec | 40 | 26 | 2.8 | Cold |
Why two Scranton quotes can differ
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Related projects, priced for Scranton
Jobs that often go together with gutters are priced below at their usual sizes, using the same Scranton wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+1%) and roof replacement lowest (−5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,750 – $11,900 | −5% |
| Metal roof | 2,000 sq ft of roof | $9,700 – $31,600 | −3% |
| Vinyl siding | 2,100 sq ft of wall | $8,450 – $25,400 | +1% |
| French drain | 60 linear ft | $600 – $2,100 | −1% |
| Attic insulation | 1,000 sq ft | $1,000 – $4,050 | +1% |
What local crews earn in Scranton
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Scranton the blend is 1.00.
Sheet metal workers (47-2211), 40% of the weighting: a median of $31.37 an hour, 6% above the US median of $29.71. The middle half of them earn between $26.11 and $41.08 an hour. About 140 work in the metro. That is 5.5 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
Roofers (47-2181), 30% of the weighting: a median of $23.86 an hour, 10% below the US median of $26.65. The middle half of them earn between $22.15 and $34.25 an hour. About 150 work in the metro. That is 5.9 per 10,000 jobs, compared with 8.7 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $23.22 an hour, which is in line with the national $22.66. The middle half of them earn between $19.53 and $28.89 an hour. BLS counts 1,450 of them working in the area, 56.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $140 to the midpoint estimate; the 25th percentile takes off about $75. That is a swing of roughly 2.7% to 5.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Scranton--Wilkes-Barre has 255,620 jobs in total (BLS, May 2025), ranking 102nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $26.11 | $31.37 | $41.08 | $29.71 | 1.06 | metro |
| Roofers (47-2181) | 30% | $22.15 | $23.86 | $34.25 | $26.65 | 0.90 | metro |
| Construction laborers (47-2061) | 30% | $19.53 | $23.22 | $28.89 | $22.66 | 1.02 | metro |
| Blended | 100% | 1.00 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,150 to $3,350 for Scranton, PA is attached.
A detailed PDF report of this estimate, $9
The report lays out the gutters numbers for Scranton, PA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Scranton: your questions
+How much does it cost to install gutters in Scranton?
For 160 linear ft, expect $1,300 to $4,200 in the Scranton area. A standard-spec job lands at $2,150 to $3,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Scranton?
About $8 to $25 per linear ft for materials and labor, plus $0 to $190 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Scranton or Allentown?
Allentown is 45 miles away. The midpoint for 160 linear ft there is $2,800, which is 2% more than Scranton ($2,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Scranton?
About 38% at the midpoint, or $1,050 out of $2,750. Materials are 59% and permits 3%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Scranton?
$1,300 to $4,200. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Scranton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $190 for fees in the Scranton area (our national range of $0 to $200 scaled by the local price level).
+Is Scranton expensive for gutters compared with the rest of Pennsylvania?
Scranton is 0% above the Pennsylvania statewide estimate ($2,750 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do sheet metal workers earn in Scranton?
The BLS median is $31.37 an hour in the Scranton area, compared with $29.71 nationally. The 25th to 75th percentile range is $26.11 to $41.08.
+What do basic and premium gutters work cost in Scranton?
For 160 linear ft, basic work runs $1,300 to $2,450 and premium work $3,050 to $4,200. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Scranton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Scranton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.