Metal roof cost in Scranton, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $9,700 – $31,600
- Per sq ft of roof
- $4.75 – $15.50
- before permit
- Versus US midpoint
- −3%
- US $21,300
- Rank of 300 metros
- #130
- 1 = most expensive
Local price for a metal roof in the Scranton area: $9,700 to $31,600 for 2,000 sq ft of roof. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 3% lower than the US figure. Roofers earn a median of $23.86 an hour in the Scranton area, 10% below the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Scranton, PA, standard level
$16,300 to $25,000
About $8 to $12.50 per sq ft of roof before permits. Labor is about 55% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,250 | $11,900 |
| Labor | $9,800 | $12,800 |
| Permits and fees | $240 | $370 |
| Total | $16,300 | $25,000 |
Cost breakdown for 2,000 sq ft of roof in Scranton, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,000 | $9,050 | $16,100 | 44% |
| Labor | $7,500 | $11,300 | $15,000 | 55% |
| Permits and fees | $140 | $300 | $470 | 1% |
| Total | $9,700 | $20,600 | $31,600 | 100% |
What is behind the Scranton number
We price the labor side from BLS wage data for 3 trades: roofers at 70%, sheet metal workers at 20%, construction laborers at 10%. Weighted together, Scranton wages are 0.94 times the national level. Labor makes up about 55% of the midpoint estimate (56% at national prices).
Materials are scaled with BEA's regional price parity for goods. Scranton is at 100.7 against 100 for the US, so a materials line of $9,000 nationally becomes $9,050 here (midpoint, 2,000 sq ft of roof). Permits follow the all-items index of 93.6: $140 to $470.
Who does the work: Scranton trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Scranton the blend is 0.94.
Roofers (47-2181), 70% of the weighting: a median of $23.86 an hour, 10% below the US median of $26.65. The middle half of them earn between $22.15 and $34.25 an hour. About 150 work in the metro. That is 5.9 per 10,000 jobs, compared with 8.7 nationally, so expect fewer local crews to bid.
Sheet metal workers (47-2211), 20% of the weighting: a median of $31.37 an hour, 6% above the US median of $29.71. The middle half of them earn between $26.11 and $41.08 an hour. About 140 work in the metro. That is 5.5 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 10%) the local median is $23.22 an hour, which is in line with the national $22.66. The middle half of them earn between $19.53 and $28.89 an hour. BLS counts 1,450 of them working in the area, 56.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (roofers) from the median to the 75th percentile wage adds about $3,250 to the midpoint estimate; the 25th percentile takes off about $540. That is a swing of roughly 2.6% to 15.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Scranton--Wilkes-Barre has 255,620 jobs in total (BLS, May 2025), ranking 102nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $22.15 | $23.86 | $34.25 | $26.65 | 0.90 | metro |
| Sheet metal workers (47-2211) | 20% | $26.11 | $31.37 | $41.08 | $29.71 | 1.06 | metro |
| Construction laborers (47-2061) | 10% | $19.53 | $23.22 | $28.89 | $22.66 | 1.02 | metro |
| Blended | 100% | 0.94 | |||||
Metal roof: what moves the price in Scranton
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Labor
Metal roof labor is $4-$8 per sq ft, or $400-$800 per roofing square, and standing seam needs specialist crews.
Scranton: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Scranton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small (1,200 sq ft of roof) to large (2,800 sq ft of roof).
Basic
$9,700 to $18,500
Corrugated or exposed-fastener steel panels
Standard
$16,300 to $25,000
Standing seam steel
Premium
$22,800 to $31,600
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $5,850 – $11,200 | $9,850 – $15,200 | $13,800 – $19,200 |
| average (2,000 sq ft of roof) | $9,700 – $18,500 | $16,300 – $25,000 | $22,800 – $31,600 |
| large (2,800 sq ft of roof) | $13,500 – $25,700 | $22,700 – $34,900 | $31,800 – $44,100 |
Is Scranton cheap or dear? The local comparison
Of the five closest metros, none is cheaper than Scranton. Reading comes closest at about $20,800.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Scranton, PAthis page | $9,700 – $31,600 | $20,600 | |
| Allentown, PA45 miles | $10,600 – $33,400 | $22,000 | +6% |
| Binghamton, NY60 miles | $10,700 – $33,500 | $22,100 | +7% |
| Reading, PA65 miles | $9,800 – $31,800 | $20,800 | +1% |
| Lancaster, PA90 miles | $9,850 – $32,000 | $20,900 | +1% |
| Harrisburg, PA90 miles | $9,800 – $31,900 | $20,800 | +1% |
| Pennsylvania (statewide) | $10,200 – $32,500 | $21,300 | +3% |
| United States | $10,200 – $32,500 | $21,300 | +3% |
Out of the 300 metros we cover, Scranton ranks #130 for the cost of this job (#1 is the most expensive). Statewide, Scranton is 3% below the Pennsylvania figure.
Elsewhere in Pennsylvania
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $11,100 – $33,900 | $22,500 | +9% |
| Pittsburgh, PA | 1,114,490 jobs | $9,800 – $31,900 | $20,800 | +1% |
| Allentown, PA | 377,180 jobs | $10,600 – $33,400 | $22,000 | +6% |
| Harrisburg, PA | 335,010 jobs | $9,800 – $31,900 | $20,800 | +1% |
| Lancaster, PA | 252,230 jobs | $9,850 – $32,000 | $20,900 | +1% |
| York, PA | 183,590 jobs | $9,950 – $32,200 | $21,100 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Scranton against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Spokane, WA | 255,820 jobs | $11,000 – $34,800 | $22,900 | +11% |
| Lancaster, PA | 252,230 jobs | $9,850 – $32,000 | $20,900 | +1% |
| Lakeland, FL | 265,280 jobs | $8,700 – $29,100 | $18,900 | −8% |
| Palm Bay, FL | 245,170 jobs | $9,000 – $29,700 | $19,400 | −6% |
Planning more than one job in Scranton?
Jobs that often go together with metal roof are priced below at their usual sizes, using the same Scranton wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+1%) and roof replacement lowest (−5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,750 – $11,900 | −5% |
| Gutters | 160 linear ft | $1,300 – $4,200 | level |
| Attic insulation | 1,000 sq ft | $1,000 – $4,050 | +1% |
| Vinyl siding | 2,100 sq ft of wall | $8,450 – $25,400 | +1% |
The best months for metal roof in Scranton
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Wilkes-Barre Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Scranton are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Scranton gets about 39 inches of precipitation in a normal year, including roughly 45 inches of snow. The wettest months are June, August and September (4.2 inches in September). Inside the workable window, March and November are the driest, at 2.8 and 2.9 inches. The station averages about 12 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 36 | 20 | 2.6 | Cold |
| Feb | 39 | 22 | 2.1 | Cold |
| Mar | 48 | 29 | 2.8 | Workable |
| Apr | 61 | 39 | 3.3 | Workable |
| May | 72 | 50 | 3.3 | Workable |
| Jun | 80 | 58 | 3.8 | Workable |
| Jul | 85 | 63 | 3.6 | Workable |
| Aug | 82 | 61 | 3.9 | Workable |
| Sep | 75 | 54 | 4.2 | Workable |
| Oct | 63 | 43 | 3.7 | Workable |
| Nov | 51 | 34 | 2.9 | Workable |
| Dec | 40 | 26 | 2.8 | Cold |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $16,300 to $25,000 for Scranton, PA is attached.
A detailed PDF report of this estimate, $9
The report lays out the metal roof numbers for Scranton, PA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Scranton: your questions
+How much does it cost to install a metal roof in Scranton?
For 2,000 sq ft of roof, expect $9,700 to $31,600 in the Scranton area. A standard-spec job lands at $16,300 to $25,000. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Scranton?
About $4.75 to $15.50 per sq ft of roof for materials and labor, plus $140 to $470 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Scranton or Allentown?
Allentown is 45 miles away. The midpoint for 2,000 sq ft of roof there is $22,000, which is 6% more than Scranton ($20,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Scranton?
About 55% at the midpoint, or $11,300 out of $20,600. Materials are 44% and permits 1%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Scranton?
$9,700 to $31,600. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Scranton?
Often, but rules are set by your city or county building office, so call before you hire. Budget $140 to $470 for fees in the Scranton area (our national range of $150 to $500 scaled by the local price level).
+Is Scranton expensive for metal roof compared with the rest of Pennsylvania?
Scranton is 3% below the Pennsylvania statewide estimate ($21,300 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do roofers earn in Scranton?
The BLS median is $23.86 an hour in the Scranton area, compared with $26.65 nationally. The 25th to 75th percentile range is $22.15 to $34.25.
+What do basic and premium metal roof work cost in Scranton?
For 2,000 sq ft of roof, basic work runs $9,700 to $18,500 and premium work $22,800 to $31,600. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+When is the best time to install a metal roof in Scranton?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Metal roof near Scranton
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.