Chain-link fence cost in Crestview, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,450 – $5,650
- Per linear ft
- $9.35 – $37
- before permit
- Versus US midpoint
- −8%
- US $3,850
- Rank of 300 metros
- #197
- 1 = most expensive
If you want to install a chain-link fence in Crestview, plan on $1,450 to $5,650 for 150 linear ft, all in. Per linear ft, that is $9.35 to $37 for materials and labor, with the permit on top. The local midpoint runs 8% lower than the national one. Construction laborers earn a median of $21.72 an hour in the Crestview area, 4% below the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Crestview, FL, standard level
$2,700 to $4,400
About $17.50 to $28.50 per linear ft before permits. Labor is about 59% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,450 | $2,700 |
| Permits and fees | $70 | $110 |
| Total | $2,700 | $4,400 |
Cost breakdown for 150 linear ft in Crestview, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $870 | $1,350 | $1,900 | 39% |
| Labor | $540 | $2,100 | $3,650 | 59% |
| Permits and fees | $40 | $90 | $150 | 3% |
| Total | $1,450 | $3,550 | $5,650 | 100% |
What is behind the Crestview number
Labor is 59% of the midpoint bill here, against 60% nationally. The mix of trades behind this job is construction laborers (60%), carpenters (40%). We weight each trade's local median wage by that share and compare it with the national median. In Crestview the blended ratio comes out at 0.90.
On the materials line, the BEA goods price index for the Crestview metro is 96.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $1,350, compared with $1,450 at national prices. Permit and inspection fees are scaled by the broader index (97.0) and land at $40 to $150.
Related projects, priced for Crestview
Because every project leans on different trades, Crestview's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −5% and wood fence −8%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,800 – $7,100 | −8% |
| Vinyl fence | 150 linear ft | $4,300 – $8,650 | −5% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Gravel driveway | 1,000 sq ft | $2,300 – $9,450 | −8% |
Cost by quality level and size in Crestview
Three bands are cut from the same cited range and localized for Crestview wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$1,450 to $3,150
4-ft galvanized, front yard
Standard
$2,700 to $4,400
6-ft galvanized backyard fence
Premium
$3,950 to $5,650
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $980 – $2,100 | $1,850 – $2,950 | $2,700 – $3,800 |
| 150 ft (150 linear ft) | $1,450 – $3,150 | $2,700 – $4,400 | $3,950 – $5,650 |
| 200 ft (200 linear ft) | $1,900 – $4,150 | $3,600 – $5,800 | $5,250 – $7,500 |
| full lot (300 linear ft) | $2,850 – $6,200 | $5,350 – $8,700 | $7,850 – $11,200 |
Climate in Crestview: timing your chain-link fence job
We use NOAA's 1991-2020 climate normals for Crestview Bob Sikes Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Crestview (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Crestview gets about 64 inches of precipitation in a normal year. The wettest months are June, July and August (7.9 inches in July). Inside the workable window, May and October are the driest, at 4.1 and 4.1 inches. The station averages about 98 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 63 | 39 | 5.7 | Workable |
| Feb | 67 | 41 | 4.6 | Workable |
| Mar | 73 | 47 | 5.7 | Workable |
| Apr | 79 | 53 | 4.9 | Workable |
| May | 87 | 61 | 4.1 | Workable |
| Jun | 91 | 69 | 6.0 | Hot |
| Jul | 92 | 71 | 7.9 | Hot |
| Aug | 92 | 71 | 6.4 | Hot |
| Sep | 89 | 67 | 5.1 | Workable |
| Oct | 81 | 56 | 4.1 | Workable |
| Nov | 72 | 45 | 4.3 | Workable |
| Dec | 65 | 41 | 4.9 | Workable |
Is Crestview cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Crestview. Dothan is the lowest at about $3,050 (midpoint, 150 linear ft), 70 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Crestview, FLthis page | $1,450 – $5,650 | $3,550 | |
| Pensacola, FL50 miles | $1,400 – $5,500 | $3,450 | −2% |
| Panama City, FL50 miles | $1,450 – $5,600 | $3,500 | −1% |
| Dothan, AL70 miles | $1,300 – $4,800 | $3,050 | −14% |
| Daphne, AL85 miles | $1,400 – $5,250 | $3,300 | −6% |
| Mobile, AL110 miles | $1,400 – $5,200 | $3,300 | −7% |
| Florida (statewide) | $1,450 – $5,650 | $3,550 | level |
| United States | $1,550 – $6,150 | $3,850 | +8% |
Across 300 US metros, Crestview comes in at #197 from the top. The priciest is Honolulu, HI at $5,450; the cheapest is Brownsville, TX at $3,000 (midpoints, 150 linear ft). Statewide, Crestview is 0% below the Florida figure.
Other Florida metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $1,550 – $5,900 | $3,700 | +5% |
| Tampa, FL | 1,447,120 jobs | $1,450 – $5,650 | $3,550 | level |
| Orlando, FL | 1,411,730 jobs | $1,400 – $5,450 | $3,450 | −3% |
| Jacksonville, FL | 765,930 jobs | $1,450 – $5,600 | $3,550 | −1% |
| North Port, FL | 339,940 jobs | $1,450 – $5,750 | $3,600 | +2% |
| Cape Coral, FL | 304,790 jobs | $1,450 – $5,600 | $3,500 | −1% |
Cities with a workforce like Crestview's
Big cities and small ones price differently, so here is Crestview against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Norwich, CT | 126,450 jobs | $1,550 – $6,450 | $4,000 | +13% |
| Duluth, MN | 124,710 jobs | $1,600 – $6,750 | $4,200 | +18% |
| Elkhart, IN | 127,730 jobs | $1,500 – $6,200 | $3,850 | +8% |
| Appleton, WI | 124,230 jobs | $1,600 – $6,700 | $4,150 | +16% |
Why two Crestview quotes can differ
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Height
A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).
Crestview labor market for chain-link fence
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Crestview is 0.90 times the national level.
Construction laborers (47-2061), 60% of the weighting: a median of $21.72 an hour, 4% below the US median of $22.66. The middle half of them earn between $18.08 and $23.06 an hour. About 1,000 work in the metro. That is 80.0 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For carpenters (47-2031, weighted 40%) the local median is $23.53 an hour, which is 19% below the national $29.12. The middle half of them earn between $20.91 and $28.14 an hour. BLS counts 370 of them working in the area, 29.6 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($23.06 an hour) instead of the median, the labor line grows by about $80. At the 25th percentile ($18.08) it shrinks by about $220. The total moves by 2.3% or 6.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 125,050 jobs in the Crestview-Fort Walton Beach-Destin area. That makes it the 172nd largest of the 300 metros we cover, with 0.08% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $18.08 | $21.72 | $23.06 | $22.66 | 0.96 | metro |
| Carpenters (47-2031) | 40% | $20.91 | $23.53 | $28.14 | $29.12 | 0.81 | metro |
| Blended | 100% | 0.90 | |||||
Extras that change the Crestview total
Extras are quoted nationally and then scaled to Crestview by the average of the local wage index (0.90) and goods index (0.96), a factor of 0.93. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $75 – $930 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,700 to $4,400 for Crestview, FL is attached.
A detailed PDF report of this estimate, $9
The report lays out the chain-link fence numbers for Crestview, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Crestview: your questions
+How much does it cost to install a chain-link fence in Crestview?
For 150 linear ft, expect $1,450 to $5,650 in the Crestview area. A standard-spec job lands at $2,700 to $4,400. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Crestview?
About $9.35 to $37 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Crestview or Pensacola?
Pensacola is 50 miles away. The midpoint for 150 linear ft there is $3,450, which is 2% less than Crestview ($3,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Crestview?
About 59% at the midpoint, or $2,100 out of $3,550. Materials are 39% and permits 3%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Crestview?
$1,900 to $7,500. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Crestview?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Crestview area (our national range of $40 to $150 scaled by the local price level).
+Is Crestview expensive for chain-link fence compared with the rest of Florida?
Crestview is 0% below the Florida statewide estimate ($3,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do construction laborers earn in Crestview?
The BLS median is $21.72 an hour in the Crestview area, compared with $22.66 nationally. The 25th to 75th percentile range is $18.08 to $23.06.
+What do basic and premium chain-link fence work cost in Crestview?
For 150 linear ft, basic work runs $1,450 to $3,150 and premium work $3,950 to $5,650. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in Crestview?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Crestview?
$75 to $930, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Crestview
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).