Aluminum fence cost in Crestview, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,500 – $10,600
- Per linear ft
- $23 – $70
- before permit
- Versus US midpoint
- −7%
- US $7,600
- Rank of 300 metros
- #208
- 1 = most expensive
Crestview homeowners pay roughly $3,500 to $10,600 to install an aluminum fence at 150 linear ft, or $23 to $70 per linear ft (permit not included). Against the US midpoint, Crestview is 7% lower. Carpenters earn a median of $23.53 an hour in the Crestview area, 19% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Crestview, FL, standard level
$5,650 to $8,500
About $37 to $56 per linear ft before permits. Labor is about 32% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $1,900 | $2,650 |
| Permits and fees | $70 | $110 |
| Total | $5,650 | $8,500 |
Cost breakdown for 150 linear ft in Crestview, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,200 | 66% |
| Labor | $1,300 | $2,300 | $3,250 | 32% |
| Permits and fees | $40 | $90 | $150 | 1% |
| Total | $3,500 | $7,050 | $10,600 | 100% |
Why Crestview prices look the way they do
The wage side of the estimate leans on carpenters, who do 40% of the hours on a typical job. Their local median is $23.53 an hour. Add the other trades involved and the blended wage index for Crestview is 0.87 (US = 1.00), which puts labor at 32% of the total.
On the materials line, the BEA goods price index for the Crestview metro is 96.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,700, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (97.0) and land at $40 to $150.
When to schedule aluminum fence in Crestview
We use NOAA's 1991-2020 climate normals for Crestview Bob Sikes Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Crestview (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Crestview gets about 64 inches of precipitation in a normal year. The wettest months are June, July and August (7.9 inches in July). Inside the workable window, May and October are the driest, at 4.1 and 4.1 inches. The station averages about 98 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 63 | 39 | 5.7 | Workable |
| Feb | 67 | 41 | 4.6 | Workable |
| Mar | 73 | 47 | 5.7 | Workable |
| Apr | 79 | 53 | 4.9 | Workable |
| May | 87 | 61 | 4.1 | Workable |
| Jun | 91 | 69 | 6.0 | Hot |
| Jul | 92 | 71 | 7.9 | Hot |
| Aug | 92 | 71 | 6.4 | Hot |
| Sep | 89 | 67 | 5.1 | Workable |
| Oct | 81 | 56 | 4.1 | Workable |
| Nov | 72 | 45 | 4.3 | Workable |
| Dec | 65 | 41 | 4.9 | Workable |
How Crestview compares
Of the five closest metros, all are cheaper than Crestview. Dothan is the lowest at about $6,600 (midpoint, 150 linear ft), 70 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Crestview, FLthis page | $3,500 – $10,600 | $7,050 | |
| Pensacola, FL50 miles | $3,450 – $10,500 | $7,000 | −1% |
| Panama City, FL50 miles | $3,500 – $10,600 | $7,000 | −1% |
| Dothan, AL70 miles | $3,250 – $10,000 | $6,600 | −6% |
| Daphne, AL85 miles | $3,400 – $10,300 | $6,850 | −3% |
| Mobile, AL110 miles | $3,400 – $10,300 | $6,850 | −3% |
| Florida (statewide) | $3,550 – $10,700 | $7,150 | +1% |
| United States | $3,800 – $11,400 | $7,600 | +8% |
Across 300 US metros, Crestview comes in at #208 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Crestview is 1% below the Florida figure.
Other Florida metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $3,700 – $11,300 | $7,500 | +6% |
| Tampa, FL | 1,447,120 jobs | $3,500 – $10,600 | $7,050 | level |
| Orlando, FL | 1,411,730 jobs | $3,450 – $10,500 | $7,000 | −1% |
| Jacksonville, FL | 765,930 jobs | $3,500 – $10,600 | $7,050 | level |
| North Port, FL | 339,940 jobs | $3,550 – $10,700 | $7,100 | +1% |
| Cape Coral, FL | 304,790 jobs | $3,500 – $10,600 | $7,050 | level |
Cities with a workforce like Crestview's
Big cities and small ones price differently, so here is Crestview against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Norwich, CT | 126,450 jobs | $3,900 – $11,700 | $7,800 | +10% |
| Duluth, MN | 124,710 jobs | $4,000 – $11,800 | $7,900 | +12% |
| Elkhart, IN | 127,730 jobs | $3,700 – $11,100 | $7,400 | +5% |
| Appleton, WI | 124,230 jobs | $3,900 – $11,600 | $7,750 | +10% |
Pick a size, pick a tier: aluminum fence pricing in Crestview
Three bands are cut from the same cited range and localized for Crestview wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,500 to $6,350
Standard picket or ornamental, 4 ft
Standard
$5,650 to $8,500
Ornamental pool-code fence, 4-5 ft
Premium
$7,750 to $10,600
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,350 – $4,250 | $3,800 – $5,700 | $5,200 – $7,150 |
| 150 ft (150 linear ft) | $3,500 – $6,350 | $5,650 – $8,500 | $7,750 – $10,600 |
| 200 ft (200 linear ft) | $4,650 – $8,450 | $7,500 – $11,300 | $10,300 – $14,100 |
Planning more than one job in Crestview?
Because every project leans on different trades, Crestview's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −5% and wood fence −8%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,650 | −5% |
| Wood fence | 150 linear ft | $2,800 – $7,100 | −8% |
| Chain-link fence | 150 linear ft | $1,450 – $5,650 | −8% |
| Inground pool | 450 sq ft | $33,500 – $104,500 | −7% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Crestview is 0.87 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $23.53 an hour, which is 19% below the national $29.12. The middle half of them earn between $20.91 and $28.14 an hour. BLS counts 370 of them working in the area, 29.6 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 40% of the weighting: a median of $21.72 an hour, 4% below the US median of $22.66. The middle half of them earn between $18.08 and $23.06 an hour. About 1,000 work in the metro. That is 80.0 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For sheet metal workers (47-2211, weighted 20%) the local median is $23.89 an hour, which is 20% below the national $29.71. The middle half of them earn between $22.85 and $27.88 an hour. BLS counts 110 of them working in the area, 8.8 for every 10,000 jobs (US: 7.7), so the local bench is about average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.14 an hour) instead of the median, the labor line grows by about $170. At the 25th percentile ($20.91) it shrinks by about $95. The total moves by 2.4% or 1.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 125,050 jobs in the Crestview-Fort Walton Beach-Destin area. That makes it the 172nd largest of the 300 metros we cover, with 0.08% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $20.91 | $23.53 | $28.14 | $29.12 | 0.81 | metro |
| Construction laborers (47-2061) | 40% | $18.08 | $21.72 | $23.06 | $22.66 | 0.96 | metro |
| Sheet metal workers (47-2211) | 20% | $22.85 | $23.89 | $27.88 | $29.71 | 0.80 | metro |
| Blended | 100% | 0.87 | |||||
Optional extras in Crestview
Extras are quoted nationally and then scaled to Crestview by the average of the local wage index (0.87) and goods index (0.96), a factor of 0.91. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $180 – $820 |
Aluminum fence: what moves the price in Crestview
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,650 to $8,500 for Crestview, FL is attached.
Detailed aluminum fence report for Crestview, FL, $9
The report lays out the aluminum fence numbers for Crestview, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Crestview: your questions
+How much does it cost to install an aluminum fence in Crestview?
For 150 linear ft, expect $3,500 to $10,600 in the Crestview area. A standard-spec job lands at $5,650 to $8,500. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Crestview?
About $23 to $70 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Crestview or Pensacola?
Pensacola is 50 miles away. The midpoint for 150 linear ft there is $7,000, which is 1% less than Crestview ($7,050). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Crestview?
About 32% at the midpoint, or $2,300 out of $7,050. Materials are 66% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Crestview?
$3,500 to $10,600. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Crestview?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Crestview area (our national range of $40 to $150 scaled by the local price level).
+Is Crestview expensive for aluminum fence compared with the rest of Florida?
Crestview is 1% below the Florida statewide estimate ($7,150 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Crestview?
The BLS median is $23.53 an hour in the Crestview area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.91 to $28.14.
+What do basic and premium aluminum fence work cost in Crestview?
For 150 linear ft, basic work runs $3,500 to $6,350 and premium work $7,750 to $10,600. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Crestview?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Crestview?
$180 to $820, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Crestview
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.