Vinyl fence cost in Chico, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,850 – $9,900
- Per linear ft
- $32 – $65
- before permit
- Versus US midpoint
- +8%
- US $6,850
- Rank of 300 metros
- #30
- 1 = most expensive
Chico homeowners pay roughly $4,850 to $9,900 to install a vinyl fence at 150 linear ft, or $32 to $65 per linear ft (permit not included). Against the US midpoint, Chico is 8% higher. Building materials run about 5% above the US average here (BEA goods price index 105.2).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Chico, CA, standard level
$6,400 to $8,400
About $42 to $55 per linear ft before permits. Labor is about 24% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,900 | $6,150 |
| Labor | $1,400 | $2,100 |
| Permits and fees | $75 | $120 |
| Total | $6,400 | $8,400 |
Cost breakdown for 150 linear ft in Chico, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $5,500 | $7,100 | 75% |
| Labor | $880 | $1,750 | $2,650 | 24% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $4,850 | $7,400 | $9,900 | 100% |
Why Chico prices look the way they do
Labor is 24% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Chico the blended ratio comes out at 1.18.
On the materials line, the BEA goods price index for the Chico metro is 105.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,500, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (101.2) and land at $40 to $150.
What nearby projects cost in Chico
Because every project leans on different trades, Chico's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs +12% and concrete slab +8%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,400 – $8,450 | +11% |
| Chain-link fence | 150 linear ft | $1,700 – $6,950 | +12% |
| Aluminum fence | 150 linear ft | $4,200 – $12,500 | +10% |
| Concrete slab | 400 sq ft | $2,650 – $5,600 | +8% |
Is Chico cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $7,400 to $7,600 across Chico and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Chico, CAthis page | $4,850 – $9,900 | $7,400 | |
| Sacramento, CA70 miles | $4,950 – $10,100 | $7,500 | +2% |
| Redding, CA80 miles | $4,850 – $9,900 | $7,400 | level |
| Napa, CA90 miles | $4,950 – $10,200 | $7,600 | +3% |
| Vallejo, CA100 miles | $4,950 – $10,200 | $7,550 | +2% |
| Santa Rosa, CA105 miles | $4,950 – $10,200 | $7,600 | +3% |
| California (statewide) | $4,950 – $10,200 | $7,550 | +3% |
| United States | $4,550 – $9,150 | $6,850 | −7% |
Across 300 US metros, Chico comes in at #30 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Chico is 3% below the California figure.
Other California metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $5,000 – $10,200 | $7,600 | +3% |
| San Francisco, CA | 2,373,920 jobs | $5,250 – $10,900 | $8,050 | +9% |
| Riverside, CA | 1,716,760 jobs | $4,750 – $9,750 | $7,250 | −2% |
| San Diego, CA | 1,538,060 jobs | $5,000 – $10,200 | $7,600 | +3% |
| San Jose, CA | 1,134,970 jobs | $5,050 – $10,400 | $7,700 | +4% |
| Sacramento, CA | 1,080,590 jobs | $4,950 – $10,100 | $7,500 | +2% |
Cities with a workforce like Chico's
Big cities and small ones price differently, so here is Chico against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Merced, CA | 79,510 jobs | $4,900 – $9,950 | $7,400 | level |
| Napa, CA | 77,860 jobs | $4,950 – $10,200 | $7,600 | +3% |
| Saginaw, MI | 80,000 jobs | $4,350 – $8,800 | $6,550 | −11% |
| Racine, WI | 76,280 jobs | $4,350 – $8,900 | $6,650 | −10% |
Extras that change the Chico total
Extras are quoted nationally and then scaled to Chico by the average of the local wage index (1.18) and goods index (1.05), a factor of 1.11. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $170 – $870 |
| Remove old fence | $1,650 – $3,350 |
When to schedule vinyl fence in Chico
We use NOAA's 1991-2020 climate normals for Chico Univ Farm (5 miles from the city center). These are 30-year monthly averages, not forecasts.
October through June is the stretch where exterior installation runs into the fewest weather problems in Chico (9 of 12 months). July, August and September have an average daytime high of 90°F or more.
Chico gets about 27 inches of precipitation in a normal year. The wettest months are January, February and December (5.1 inches in February). Inside the workable window, May and June are the driest, at 1.4 and 0.6 inches. The station averages about 99 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 56 | 36 | 5.1 | Workable |
| Feb | 62 | 38 | 5.1 | Workable |
| Mar | 67 | 42 | 3.6 | Workable |
| Apr | 73 | 45 | 1.9 | Workable |
| May | 81 | 52 | 1.4 | Workable |
| Jun | 89 | 57 | 0.6 | Workable |
| Jul | 95 | 61 | 0.0 | Hot |
| Aug | 94 | 59 | 0.1 | Hot |
| Sep | 91 | 55 | 0.3 | Hot |
| Oct | 80 | 47 | 1.7 | Workable |
| Nov | 65 | 40 | 2.4 | Workable |
| Dec | 57 | 36 | 5.0 | Workable |
Pick a size, pick a tier: vinyl fence pricing in Chico
Three bands are cut from the same cited range and localized for Chico wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,850 to $6,900
4-ft picket or ranch rail
Standard
$6,400 to $8,400
6-ft privacy fence, standard white
Premium
$7,900 to $9,900
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,250 – $4,600 | $4,300 – $5,650 | $5,300 – $6,650 |
| 150 ft (150 linear ft) | $4,850 – $6,900 | $6,400 – $8,400 | $7,900 – $9,900 |
| 200 ft (200 linear ft) | $6,500 – $9,150 | $8,500 – $11,100 | $10,500 – $13,100 |
| full lot (300 linear ft) | $9,700 – $13,700 | $12,700 – $16,700 | $15,700 – $19,600 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Chico is 1.18 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $34.75 an hour, which is 19% above the national $29.12. The middle half of them earn between $24.79 and $38.46 an hour. BLS counts 390 of them working in the area, 49.9 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 50% of the weighting: a median of $26.31 an hour, 16% above the US median of $22.66. The middle half of them earn between $22.14 and $34.60 an hour. About 480 work in the metro. That is 61.4 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($38.46 an hour) instead of the median, the labor line grows by about $95. At the 25th percentile ($24.79) it shrinks by about $260. The total moves by 1.3% or 3.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 78,220 jobs in the Chico area. That makes it the 241st largest of the 300 metros we cover, with 0.05% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $24.79 | $34.75 | $38.46 | $29.12 | 1.19 | metro |
| Construction laborers (47-2061) | 50% | $22.14 | $26.31 | $34.60 | $22.66 | 1.16 | metro |
| Blended | 100% | 1.18 | |||||
Why two Chico quotes can differ
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,400 to $8,400 for Chico, CA is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Chico, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Chico: your questions
+How much does it cost to install a vinyl fence in Chico?
For 150 linear ft, expect $4,850 to $9,900 in the Chico area. A standard-spec job lands at $6,400 to $8,400. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Chico?
About $32 to $65 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Chico or Sacramento?
Sacramento is 70 miles away. The midpoint for 150 linear ft there is $7,500, which is 2% more than Chico ($7,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Chico?
About 24% at the midpoint, or $1,750 out of $7,400. Materials are 75% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Chico?
$6,500 to $13,100. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Chico?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Chico area (our national range of $40 to $150 scaled by the local price level).
+Is Chico expensive for vinyl fence compared with the rest of California?
Chico is 3% below the California statewide estimate ($7,550 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do carpenters earn in Chico?
The BLS median is $34.75 an hour in the Chico area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.79 to $38.46.
+What do basic and premium vinyl fence work cost in Chico?
For 150 linear ft, basic work runs $4,850 to $6,900 and premium work $7,900 to $9,900. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Chico?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through June. May and June are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Chico?
$170 to $870, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Chico
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.