Vinyl fence cost in Redding, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,850 – $9,900
- Per linear ft
- $32 – $65
- before permit
- Versus US midpoint
- +8%
- US $6,850
- Rank of 300 metros
- #27
- 1 = most expensive
Local price for a vinyl fence in the Redding area: $4,850 to $9,900 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 8% higher than the US figure. Carpenters earn a median of $34.50 an hour in the Redding area, 18% above the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Redding, CA, standard level
$6,400 to $8,400
About $42 to $55 per linear ft before permits. Labor is about 24% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,900 | $6,150 |
| Labor | $1,400 | $2,150 |
| Permits and fees | $75 | $120 |
| Total | $6,400 | $8,400 |
Cost breakdown for 150 linear ft in Redding, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $5,500 | $7,100 | 75% |
| Labor | $890 | $1,800 | $2,650 | 24% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $4,850 | $7,400 | $9,900 | 100% |
Why Redding prices look the way they do
The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $34.50 an hour. Add the other trades involved and the blended wage index for Redding is 1.18 (US = 1.00), which puts labor at 24% of the total.
Materials are scaled with BEA's regional price parity for goods. Redding is at 105.2 against 100 for the US, so a materials line of $5,250 nationally becomes $5,500 here (midpoint, 150 linear ft). Permits follow the all-items index of 100.7: $40 to $150.
Add-ons priced for Redding
Add-ons start from national price ranges and are scaled by 1.12 for Redding, which is the average of the area's wage index (1.18) and goods price index (1.05). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $170 – $870 |
| Remove old fence | $1,700 – $3,350 |
Vinyl fence: what moves the price in Redding
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Redding against nearby metros and the rest of California
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,750 to $7,600 across Redding and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Redding, CAthis page | $4,850 – $9,900 | $7,400 | |
| Chico, CA80 miles | $4,850 – $9,900 | $7,400 | level |
| Medford, OR120 miles | $4,750 – $9,500 | $7,100 | −4% |
| Reno, NV135 miles | $4,450 – $9,050 | $6,750 | −9% |
| Sacramento, CA145 miles | $4,950 – $10,100 | $7,500 | +2% |
| Napa, CA155 miles | $4,950 – $10,200 | $7,600 | +2% |
| California (statewide) | $4,950 – $10,200 | $7,550 | +2% |
| United States | $4,550 – $9,150 | $6,850 | −7% |
Out of the 300 metros we cover, Redding ranks #27 for the cost of this job (#1 is the most expensive). Statewide, Redding is 2% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $5,000 – $10,200 | $7,600 | +3% |
| San Francisco, CA | 2,373,920 jobs | $5,250 – $10,900 | $8,050 | +9% |
| Riverside, CA | 1,716,760 jobs | $4,750 – $9,750 | $7,250 | −2% |
| San Diego, CA | 1,538,060 jobs | $5,000 – $10,200 | $7,600 | +3% |
| San Jose, CA | 1,134,970 jobs | $5,050 – $10,400 | $7,700 | +4% |
| Sacramento, CA | 1,080,590 jobs | $4,950 – $10,100 | $7,500 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Redding against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bozeman, MT | 72,210 jobs | $4,450 – $9,100 | $6,800 | −8% |
| Bismarck, ND | 71,270 jobs | $4,350 – $8,800 | $6,600 | −11% |
| Bangor, ME | 72,270 jobs | $4,400 – $8,800 | $6,600 | −11% |
| Lexington Park, MD | 70,650 jobs | $4,550 – $9,150 | $6,850 | −8% |
The best months for vinyl fence in Redding
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Redding Muni Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Redding are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Redding gets about 34 inches of precipitation in a normal year, including roughly 3 inches of snow. The wettest months are January, February and December (6.3 inches in December). Inside the workable window, May and October are the driest, at 1.8 and 1.9 inches. The station averages about 106 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 57 | 38 | 6.0 | Workable |
| Feb | 61 | 40 | 5.5 | Workable |
| Mar | 66 | 43 | 4.6 | Workable |
| Apr | 72 | 47 | 2.4 | Workable |
| May | 82 | 54 | 1.8 | Workable |
| Jun | 92 | 62 | 0.8 | Hot |
| Jul | 100 | 67 | 0.1 | Hot |
| Aug | 98 | 64 | 0.1 | Hot |
| Sep | 92 | 58 | 0.5 | Hot |
| Oct | 79 | 50 | 1.9 | Workable |
| Nov | 64 | 42 | 3.5 | Workable |
| Dec | 56 | 37 | 6.3 | Workable |
Who does the work: Redding trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Redding the blend is 1.18.
Carpenters (47-2031), 50% of the weighting: a median of $34.50 an hour, 18% above the US median of $29.12. The middle half of them earn between $28.08 and $38.06 an hour. About 310 work in the metro. That is 43.3 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 50%) the local median is $26.82 an hour, which is 18% above the national $22.66. The middle half of them earn between $22.06 and $36.59 an hour. BLS counts 500 of them working in the area, 69.9 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $90 to the midpoint estimate; the 25th percentile takes off about $170. That is a swing of roughly 2.2% to 1.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Redding has 71,550 jobs in total (BLS, May 2025), ranking 257th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $28.08 | $34.50 | $38.06 | $29.12 | 1.18 | metro |
| Construction laborers (47-2061) | 50% | $22.06 | $26.82 | $36.59 | $22.66 | 1.18 | metro |
| Blended | 100% | 1.18 | |||||
Planning more than one job in Redding?
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Redding wage and price inputs. Compared with national midpoints, chain-link fence comes out highest (+13%) and concrete slab lowest (+9%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,400 – $8,450 | +11% |
| Chain-link fence | 150 linear ft | $1,700 – $7,000 | +13% |
| Aluminum fence | 150 linear ft | $4,200 – $12,500 | +10% |
| Concrete slab | 400 sq ft | $2,700 – $5,650 | +9% |
Cost by quality level and size in Redding
The cited range is split into basic, standard and premium bands, then scaled to Redding. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,850 to $6,900
4-ft picket or ranch rail
Standard
$6,400 to $8,400
6-ft privacy fence, standard white
Premium
$7,900 to $9,900
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,250 – $4,600 | $4,300 – $5,650 | $5,300 – $6,650 |
| 150 ft (150 linear ft) | $4,850 – $6,900 | $6,400 – $8,400 | $7,900 – $9,900 |
| 200 ft (200 linear ft) | $6,500 – $9,150 | $8,500 – $11,200 | $10,500 – $13,200 |
| full lot (300 linear ft) | $9,700 – $13,700 | $12,700 – $16,700 | $15,700 – $19,700 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,400 to $8,400 for Redding, CA is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Redding, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Redding: your questions
+How much does it cost to install a vinyl fence in Redding?
For 150 linear ft, expect $4,850 to $9,900 in the Redding area. A standard-spec job lands at $6,400 to $8,400. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Redding?
About $32 to $65 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Redding or Chico?
Chico is 80 miles away. The midpoint for 150 linear ft there is $7,400, which is 0% less than Redding ($7,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Redding?
About 24% at the midpoint, or $1,800 out of $7,400. Materials are 75% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Redding?
$6,500 to $13,200. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Redding?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Redding area (our national range of $40 to $150 scaled by the local price level).
+Is Redding expensive for vinyl fence compared with the rest of California?
Redding is 2% below the California statewide estimate ($7,550 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do carpenters earn in Redding?
The BLS median is $34.50 an hour in the Redding area, compared with $29.12 nationally. The 25th to 75th percentile range is $28.08 to $38.06.
+What do basic and premium vinyl fence work cost in Redding?
For 150 linear ft, basic work runs $4,850 to $6,900 and premium work $7,900 to $9,900. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Redding?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Redding?
$170 to $870, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Redding
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.