Vinyl fence cost in Santa Rosa, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,950 – $10,200
- Per linear ft
- $33 – $67
- before permit
- Versus US midpoint
- +11%
- US $6,850
- Rank of 300 metros
- #8
- 1 = most expensive
Local price for a vinyl fence in the Santa Rosa area: $4,950 to $10,200 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 11% higher than the US figure. Carpenters earn a median of $38.71 an hour in the Santa Rosa area, 33% above the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Santa Rosa, CA, standard level
$6,550 to $8,650
About $43 to $56.50 per linear ft before permits. Labor is about 26% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,900 | $6,150 |
| Labor | $1,550 | $2,350 |
| Permits and fees | $80 | $130 |
| Total | $6,550 | $8,650 |
Cost breakdown for 150 linear ft in Santa Rosa, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $5,500 | $7,100 | 73% |
| Labor | $980 | $1,950 | $2,950 | 26% |
| Permits and fees | $45 | $100 | $160 | 1% |
| Total | $4,950 | $7,600 | $10,200 | 100% |
Why Santa Rosa prices look the way they do
Labor is 26% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Santa Rosa the blended ratio comes out at 1.30.
Materials are scaled with BEA's regional price parity for goods. Santa Rosa is at 105.2 against 100 for the US, so a materials line of $5,250 nationally becomes $5,500 here (midpoint, 150 linear ft). Permits follow the all-items index of 107.8: $45 to $160.
Who does the work: Santa Rosa trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Santa Rosa the blend is 1.30.
Carpenters (47-2031), 50% of the weighting: a median of $38.71 an hour, 33% above the US median of $29.12. The middle half of them earn between $30.86 and $46.67 an hour. About 2,150 work in the metro. That is 104.7 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $28.98 an hour, which is 28% above the national $22.66. The middle half of them earn between $23.67 and $37.88 an hour. BLS counts 1,550 of them working in the area, 75.5 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $210 to the midpoint estimate; the 25th percentile takes off about $200. That is a swing of roughly 2.7% to 2.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Santa Rosa-Petaluma has 205,260 jobs in total (BLS, May 2025), ranking 112th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $30.86 | $38.71 | $46.67 | $29.12 | 1.33 | metro |
| Construction laborers (47-2061) | 50% | $23.67 | $28.98 | $37.88 | $22.66 | 1.28 | metro |
| Blended | 100% | 1.30 | |||||
The best months for vinyl fence in Santa Rosa
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Santa Rosa (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Santa Rosa: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Santa Rosa gets about 32 inches of precipitation in a normal year. The wettest months are January, February and December (6.5 inches in December). The station averages about 26 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 60 | 38 | 5.8 | Workable |
| Feb | 64 | 40 | 6.4 | Workable |
| Mar | 67 | 42 | 4.3 | Workable |
| Apr | 71 | 44 | 2.0 | Workable |
| May | 75 | 48 | 1.3 | Workable |
| Jun | 80 | 51 | 0.3 | Workable |
| Jul | 82 | 52 | 0.0 | Workable |
| Aug | 83 | 53 | 0.0 | Workable |
| Sep | 84 | 51 | 0.1 | Workable |
| Oct | 79 | 48 | 1.6 | Workable |
| Nov | 67 | 42 | 3.3 | Workable |
| Dec | 59 | 38 | 6.5 | Workable |
Optional extras in Santa Rosa
Add-ons start from national price ranges and are scaled by 1.18 for Santa Rosa, which is the average of the area's wage index (1.30) and goods price index (1.05). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $180 – $920 |
| Remove old fence | $1,750 – $3,550 |
Cost by quality level and size in Santa Rosa
The cited range is split into basic, standard and premium bands, then scaled to Santa Rosa. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,950 to $7,050
4-ft picket or ranch rail
Standard
$6,550 to $8,650
6-ft privacy fence, standard white
Premium
$8,100 to $10,200
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,300 – $4,750 | $4,400 – $5,800 | $5,450 – $6,850 |
| 150 ft (150 linear ft) | $4,950 – $7,050 | $6,550 – $8,650 | $8,100 – $10,200 |
| 200 ft (200 linear ft) | $6,600 – $9,400 | $8,700 – $11,500 | $10,800 – $13,500 |
| full lot (300 linear ft) | $9,900 – $14,000 | $13,000 – $17,100 | $16,100 – $20,200 |
What nearby projects cost in Santa Rosa
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Santa Rosa wage and price inputs. Compared with national midpoints, chain-link fence comes out highest (+20%) and concrete slab lowest (+13%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $3,600 – $8,800 | +16% |
| Chain-link fence | 150 linear ft | $1,750 – $7,450 | +20% |
| Aluminum fence | 150 linear ft | $4,350 – $12,900 | +13% |
| Concrete slab | 400 sq ft | $2,800 – $5,850 | +13% |
Why two Santa Rosa quotes can differ
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Is Santa Rosa cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $7,400 to $8,050 across Santa Rosa and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Santa Rosa, CAthis page | $4,950 – $10,200 | $7,600 | |
| Napa, CA30 miles | $4,950 – $10,200 | $7,600 | level |
| Vallejo, CA55 miles | $4,950 – $10,200 | $7,550 | level |
| San Francisco, CA65 miles | $5,250 – $10,900 | $8,050 | +6% |
| Stockton, CA100 miles | $4,850 – $9,900 | $7,400 | −2% |
| Sacramento, CA105 miles | $4,950 – $10,100 | $7,500 | −1% |
| California (statewide) | $4,950 – $10,200 | $7,550 | level |
| United States | $4,550 – $9,150 | $6,850 | −10% |
Out of the 300 metros we cover, Santa Rosa ranks #8 for the cost of this job (#1 is the most expensive). Statewide, Santa Rosa is 0% above the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $5,000 – $10,200 | $7,600 | level |
| San Francisco, CA | 2,373,920 jobs | $5,250 – $10,900 | $8,050 | +6% |
| Riverside, CA | 1,716,760 jobs | $4,750 – $9,750 | $7,250 | −4% |
| San Diego, CA | 1,538,060 jobs | $5,000 – $10,200 | $7,600 | level |
| San Jose, CA | 1,134,970 jobs | $5,050 – $10,400 | $7,700 | +2% |
| Sacramento, CA | 1,080,590 jobs | $4,950 – $10,100 | $7,500 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Santa Rosa against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lansing, MI | 217,180 jobs | $4,400 – $9,050 | $6,700 | −11% |
| Springfield, MA | 201,240 jobs | $4,650 – $9,600 | $7,100 | −6% |
| Ann Arbor, MI | 219,730 jobs | $4,350 – $8,900 | $6,650 | −12% |
| Santa Maria, CA | 200,760 jobs | $4,900 – $10,000 | $7,450 | −2% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,550 to $8,650 for Santa Rosa, CA is attached.
Detailed vinyl fence report for Santa Rosa, CA, $9
Multi-page report for Santa Rosa, CA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Santa Rosa: your questions
+How much does it cost to install a vinyl fence in Santa Rosa?
For 150 linear ft, expect $4,950 to $10,200 in the Santa Rosa area. A standard-spec job lands at $6,550 to $8,650. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Santa Rosa?
About $33 to $67 per linear ft for materials and labor, plus $45 to $160 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Santa Rosa or Napa?
Napa is 30 miles away. The midpoint for 150 linear ft there is $7,600, which is 0% less than Santa Rosa ($7,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Santa Rosa?
About 26% at the midpoint, or $1,950 out of $7,600. Materials are 73% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Santa Rosa?
$6,600 to $13,500. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Santa Rosa?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $160 for fees in the Santa Rosa area (our national range of $40 to $150 scaled by the local price level).
+Is Santa Rosa expensive for vinyl fence compared with the rest of California?
Santa Rosa is 0% above the California statewide estimate ($7,550 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do carpenters earn in Santa Rosa?
The BLS median is $38.71 an hour in the Santa Rosa area, compared with $29.12 nationally. The 25th to 75th percentile range is $30.86 to $46.67.
+What do basic and premium vinyl fence work cost in Santa Rosa?
For 150 linear ft, basic work runs $4,950 to $7,050 and premium work $8,100 to $10,200. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+Is there a bad season to install a vinyl fence in Santa Rosa?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Santa Rosa?
$180 to $920, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Santa Rosa
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.