Stamped concrete cost in Greensboro, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (400 sq ft)
- $2,950 – $7,100
- Per sq ft
- $7.25 – $17
- before permit
- Versus US midpoint
- −10%
- US $5,600
- Rank of 300 metros
- #243
- 1 = most expensive
Stamped concrete in Greensboro, NC usually costs $2,950 to $7,100 for 400 sq ft. That works out to about $7.25 to $17 per sq ft before permits. Compared with the national midpoint that is $590 less. Cement masons and concrete finishers earn a median of $22.13 an hour in the Greensboro area, 19% below the US median of $27.41.
Estimate your stamped concrete cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 400 sq ft in Greensboro, NC, standard level
$4,200 to $5,850
About $10 to $14 per sq ft before permits. Labor is about 44% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,250 | $2,950 |
| Labor | $1,800 | $2,650 |
| Permits and fees | $130 | $240 |
| Total | $4,200 | $5,850 |
Cost breakdown for 400 sq ft in Greensboro, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,750 | $2,600 | $3,500 | 52% |
| Labor | $1,150 | $2,200 | $3,300 | 44% |
| Permits and fees | $45 | $190 | $330 | 4% |
| Total | $2,950 | $5,000 | $7,100 | 100% |
Where the Greensboro price comes from
Labor is 44% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is cement masons and concrete finishers (60%), construction laborers (30%), operating engineers and other construction equipment operators (10%). We weight each trade's local median wage by that share and compare it with the national median. In Greensboro the blended ratio comes out at 0.82.
Materials are scaled with BEA's regional price parity for goods. Greensboro is at 96.6 against 100 for the US, so a materials line of $2,700 nationally becomes $2,600 here (midpoint, 400 sq ft). Permits follow the all-items index of 92.9: $45 to $330.
Extras that change the Greensboro total
Add-ons start from national price ranges and are scaled by 0.89 for Greensboro, which is the average of the area's wage index (0.82) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a vapor barrier | $180 – $360 |
Is Greensboro cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 400 sq ft range from $5,000 to $5,200 across Greensboro and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greensboro, NCthis page | $2,950 – $7,100 | $5,000 | |
| Burlington, NC20 miles | $2,950 – $7,150 | $5,050 | +1% |
| Winston, NC30 miles | $2,950 – $7,050 | $5,000 | level |
| Durham, NC40 miles | $3,000 – $7,200 | $5,100 | +2% |
| Raleigh, NC75 miles | $3,000 – $7,300 | $5,150 | +3% |
| Charlotte, NC80 miles | $3,000 – $7,350 | $5,200 | +3% |
| North Carolina (statewide) | $3,000 – $7,250 | $5,100 | +2% |
| United States | $3,250 – $7,950 | $5,600 | +12% |
Out of the 300 metros we cover, Greensboro ranks #243 for the cost of this job (#1 is the most expensive). Statewide, Greensboro is 2% below the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $3,000 – $7,350 | $5,200 | +3% |
| Raleigh, NC | 743,120 jobs | $3,000 – $7,300 | $5,150 | +3% |
| Durham, NC | 344,020 jobs | $3,000 – $7,200 | $5,100 | +2% |
| Winston, NC | 271,980 jobs | $2,950 – $7,050 | $5,000 | level |
| Wilmington, NC | 191,280 jobs | $2,950 – $7,150 | $5,050 | +1% |
| Asheville, NC | 180,620 jobs | $3,000 – $7,250 | $5,100 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Greensboro against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dayton, OH | 372,660 jobs | $3,300 – $8,100 | $5,700 | +14% |
| Little Rock, AR | 358,210 jobs | $2,850 – $6,900 | $4,850 | −3% |
| Allentown, PA | 377,180 jobs | $3,350 – $8,300 | $5,850 | +16% |
| Worcester, MA | 349,880 jobs | $3,450 – $8,600 | $6,050 | +20% |
Related projects, priced for Greensboro
Jobs that often go together with stamped concrete are priced below at their usual sizes, using the same Greensboro wage and price inputs. Compared with national midpoints, asphalt driveway comes out highest (−7%) and concrete driveway lowest (−13%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete patio | 300 sq ft | $1,150 – $3,550 | −11% |
| Concrete driveway | 600 sq ft | $3,200 – $7,950 | −13% |
| Paver patio | 300 sq ft | $2,700 – $4,900 | −10% |
| Concrete slab | 400 sq ft | $2,200 – $4,700 | −10% |
| Asphalt driveway | 600 sq ft | $2,850 – $6,850 | −7% |
| Gravel driveway | 1,000 sq ft | $2,250 – $9,200 | −10% |
Specs and site conditions that change a Greensboro bid
Sealing and vapor barrier
Sealer is usually quoted separately; vapor barrier material is $0.20-$1.50 per sq ft depending on thickness (HomeGuide).
Not included
These prices don't include site prep that depends on the project: demolition, grading, or a thicker base.
Pattern and color
Basic to average coloring runs $8-$19 per sq ft. A 2-car stamped driveway runs $12-$18 per sq ft (HomeGuide); Estimators.us puts decorative slabs at $15-$30.
What local crews earn in Greensboro
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Greensboro the blend is 0.82.
Cement masons and concrete finishers (47-2051), 60% of the weighting: a median of $22.13 an hour, 19% below the US median of $27.41. The middle half of them earn between $19.50 and $23.67 an hour. About 440 work in the metro. That is 12.0 per 10,000 jobs, compared with 13.3 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 30%) the local median is $19.28 an hour, which is 15% below the national $22.66. The middle half of them earn between $17.65 and $23.22 an hour. BLS counts 2,190 of them working in the area, 59.9 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $23.71 an hour, 18% below the US median of $28.78. The middle half of them earn between $21.54 and $25.62 an hour. About 1,080 work in the metro. That is 29.6 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $90 to the midpoint estimate; the 25th percentile takes off about $160. That is a swing of roughly 3.1% to 1.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Greensboro-High Point has 365,410 jobs in total (BLS, May 2025), ranking 71st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 60% | $19.50 | $22.13 | $23.67 | $27.41 | 0.81 | metro |
| Construction laborers (47-2061) | 30% | $17.65 | $19.28 | $23.22 | $22.66 | 0.85 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $21.54 | $23.71 | $25.62 | $28.78 | 0.82 | metro |
| Blended | 100% | 0.82 | |||||
Pick a size, pick a tier: stamped concrete pricing in Greensboro
The cited range is split into basic, standard and premium bands, then scaled to Greensboro. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x20 patio (200 sq ft) to 2-car driveway (600 sq ft).
Basic
$2,950 to $4,600
Basic pattern, one integral color
Standard
$4,200 to $5,850
Two-tone color release and a border
Premium
$5,450 to $7,100
Multi-color, hand-detailed, sealed to a high finish
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x20 patio (200 sq ft) | $1,500 – $2,400 | $2,150 – $3,050 | $2,800 – $3,700 |
| 20x20 patio (400 sq ft) | $2,950 – $4,600 | $4,200 – $5,850 | $5,450 – $7,100 |
| 2-car driveway (600 sq ft) | $4,400 – $6,800 | $6,200 – $8,650 | $8,050 – $10,500 |
Greensboro weather and the stamped concrete calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Greensboro Wtp (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For pouring concrete, the comfortable months in Greensboro are April through October: 7 of 12. Outside them, January, February, March, November and December have an average overnight low of 40°F or below.
The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.
Greensboro gets about 46 inches of precipitation in a normal year. The wettest months are June, July and August (5.8 inches in July). Inside the workable window, May and October are the driest, at 3.3 and 3.2 inches. The station averages about 42 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 50 | 30 | 3.2 | Cold |
| Feb | 54 | 33 | 2.5 | Cold |
| Mar | 62 | 39 | 3.7 | Cold |
| Apr | 71 | 48 | 3.6 | Workable |
| May | 79 | 58 | 3.3 | Workable |
| Jun | 85 | 65 | 5.1 | Workable |
| Jul | 89 | 71 | 5.8 | Workable |
| Aug | 87 | 68 | 4.5 | Workable |
| Sep | 81 | 61 | 4.4 | Workable |
| Oct | 71 | 49 | 3.2 | Workable |
| Nov | 61 | 39 | 3.0 | Cold |
| Dec | 53 | 33 | 3.4 | Cold |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,200 to $5,850 for Greensboro, NC is attached.
Detailed stamped concrete report for Greensboro, NC, $9
The report lays out the stamped concrete numbers for Greensboro, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Stamped concrete in Greensboro: your questions
+How much does it cost to pour stamped concrete in Greensboro?
For 400 sq ft, expect $2,950 to $7,100 in the Greensboro area. A standard-spec job lands at $4,200 to $5,850. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for stamped concrete in Greensboro?
About $7.25 to $17 per sq ft for materials and labor, plus $45 to $330 for the permit if one is needed. The US range is $8 to $19.
+Is stamped concrete cheaper in Greensboro or Burlington?
Burlington is 20 miles away. The midpoint for 400 sq ft there is $5,050, which is 1% more than Greensboro ($5,000). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greensboro?
About 44% at the midpoint, or $2,200 out of $5,000. Materials are 52% and permits 4%. Nationally, labor is 48%.
+What would 20x20 patio (400 sq ft) cost in Greensboro?
$2,950 to $7,100. Pick a different size in the estimator above to get your own number.
+Does stamped concrete need a permit in Greensboro?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $330 for fees in the Greensboro area (our national range of $50 to $350 scaled by the local price level).
+Is Greensboro expensive for stamped concrete compared with the rest of North Carolina?
Greensboro is 2% below the North Carolina statewide estimate ($5,100 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do cement masons and concrete finishers earn in Greensboro?
The BLS median is $22.13 an hour in the Greensboro area, compared with $27.41 nationally. The 25th to 75th percentile range is $19.50 to $23.67.
+What do basic and premium stamped concrete work cost in Greensboro?
For 400 sq ft, basic work runs $2,950 to $4,600 and premium work $5,450 to $7,100. Basic means: basic pattern, one integral color. Premium means: multi-color, hand-detailed, sealed to a high finish.
+When is the best time to pour stamped concrete in Greensboro?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through October. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a vapor barrier" add in Greensboro?
$180 to $360 for 400 sq ft, from a national range scaled by the local wage and goods indexes.
Stamped concrete near Greensboro
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Stamped Concrete Cost? (2026) (accessed November 4, 2026)
- SimplyWise: Concrete Estimate Template: Free PDF + Excel (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = SimplyWise's 200 sq ft stamped-patio line ($900-$1,800), divided by 200 sq ft.