Asphalt driveway cost in Greensboro, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,850 – $6,850
- Per sq ft
- $4.70 – $11
- before permit
- Versus US midpoint
- −7%
- US $5,250
- Rank of 300 metros
- #217
- 1 = most expensive
Greensboro homeowners pay roughly $2,850 to $6,850 to pave a driveway at 600 sq ft, or $4.70 to $11 per sq ft (permit not included). Against the US midpoint, Greensboro is 7% lower. Paving, surfacing and tamping equipment operators earn a median of $24.00 an hour in the Greensboro area, 6% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Greensboro, NC, standard level
$4,050 to $5,650
About $6.60 to $9.20 per sq ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,250 |
| Labor | $1,500 | $2,250 |
| Permits and fees | $90 | $140 |
| Total | $4,050 | $5,650 |
Cost breakdown for 600 sq ft in Greensboro, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $2,850 | $3,850 | 59% |
| Labor | $890 | $1,850 | $2,850 | 38% |
| Permits and fees | $45 | $120 | $190 | 2% |
| Total | $2,850 | $4,850 | $6,850 | 100% |
Where the Greensboro price comes from
The wage side of the estimate leans on paving, surfacing and tamping equipment operators, who do 40% of the hours on a typical job. Their local median is $24.00 an hour. Add the other trades involved and the blended wage index for Greensboro is 0.88 (US = 1.00), which puts labor at 38% of the total.
On the materials line, the BEA goods price index for the Greensboro metro is 96.6 (US = 100). The midpoint materials bill for 600 sq ft comes to $2,850, compared with $2,950 at national prices. Permit and inspection fees are scaled by the broader index (92.9) and land at $45 to $190.
Greensboro: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Greensboro wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$2,850 to $4,450
New topcoat over a sound base, flat lot
Standard
$4,050 to $5,650
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,250 to $6,850
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,850 | $1,650 – $2,350 | $2,200 – $2,850 |
| 20x20 (400 sq ft) | $1,900 – $3,000 | $2,750 – $3,800 | $3,550 – $4,650 |
| 2-car (20x30), 600 sq ft | $2,850 – $4,450 | $4,050 – $5,650 | $5,250 – $6,850 |
| long rural (10x100), 1,000 sq ft | $4,750 – $7,350 | $6,700 – $9,350 | $8,650 – $11,300 |
How Greensboro compares
Same job, same size (600 sq ft), priced for the nearest metros. Durham is the priciest of the group at $5,050. Winston is the cheapest at $4,850.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greensboro, NCthis page | $2,850 – $6,850 | $4,850 | |
| Burlington, NC20 miles | $2,850 – $6,900 | $4,850 | level |
| Winston, NC30 miles | $2,850 – $6,850 | $4,850 | level |
| Durham, NC40 miles | $2,950 – $7,150 | $5,050 | +4% |
| Raleigh, NC75 miles | $2,900 – $6,950 | $4,950 | +2% |
| Charlotte, NC80 miles | $2,900 – $6,950 | $4,900 | +1% |
| North Carolina (statewide) | $2,850 – $6,900 | $4,900 | +1% |
| United States | $3,050 – $7,400 | $5,250 | +8% |
Across 300 US metros, Greensboro comes in at #217 from the top. The priciest is Kahului, HI at $7,650; the cheapest is Fort Smith, AR at $4,450 (midpoints, 600 sq ft). Statewide, Greensboro is 1% below the North Carolina figure.
Other North Carolina metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $2,900 – $6,950 | $4,900 | +1% |
| Raleigh, NC | 743,120 jobs | $2,900 – $6,950 | $4,950 | +2% |
| Durham, NC | 344,020 jobs | $2,950 – $7,150 | $5,050 | +4% |
| Winston, NC | 271,980 jobs | $2,850 – $6,850 | $4,850 | level |
| Wilmington, NC | 191,280 jobs | $2,850 – $6,900 | $4,900 | +1% |
| Asheville, NC | 180,620 jobs | $2,900 – $7,000 | $4,950 | +2% |
Cities with a workforce like Greensboro's
Big cities and small ones price differently, so here is Greensboro against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dayton, OH | 372,660 jobs | $2,950 – $7,250 | $5,100 | +5% |
| Little Rock, AR | 358,210 jobs | $2,750 – $6,550 | $4,650 | −5% |
| Allentown, PA | 377,180 jobs | $3,100 – $7,550 | $5,350 | +10% |
| Worcester, MA | 349,880 jobs | $3,250 – $8,050 | $5,650 | +16% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Greensboro is 0.88 times the national level.
For paving, surfacing and tamping equipment operators (47-2071, weighted 40%) the local median is $24.00 an hour, which is 6% below the national $25.64. The middle half of them earn between $20.91 and $24.60 an hour. BLS counts 130 of them working in the area, 3.6 for every 10,000 jobs (US: 2.7), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $19.28 an hour, 15% below the US median of $22.66. The middle half of them earn between $17.65 and $23.22 an hour. About 2,190 work in the metro. That is 59.9 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $23.71 an hour, which is 18% below the national $28.78. The middle half of them earn between $21.54 and $25.62 an hour. BLS counts 1,080 of them working in the area, 29.6 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Quotes come from real crews, not medians. If the paving, surfacing and tamping equipment operators on your job are paid at the 75th percentile ($24.60 an hour) instead of the median, the labor line grows by about $20. At the 25th percentile ($20.91) it shrinks by about $100. The total moves by 0.4% or 2.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 365,410 jobs in the Greensboro-High Point area. That makes it the 71st largest of the 300 metros we cover, with 0.23% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $20.91 | $24.00 | $24.60 | $25.64 | 0.94 | metro |
| Construction laborers (47-2061) | 30% | $17.65 | $19.28 | $23.22 | $22.66 | 0.85 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $21.54 | $23.71 | $25.62 | $28.78 | 0.82 | metro |
| Blended | 100% | 0.88 | |||||
Planning more than one job in Greensboro?
Because every project leans on different trades, Greensboro's wage level does not move all prices equally. Against the US midpoint, French drain runs −9% and concrete driveway −13%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,200 – $7,950 | −13% |
| Gravel driveway | 1,000 sq ft | $2,250 – $9,200 | −10% |
| Paver patio | 300 sq ft | $2,700 – $4,900 | −10% |
| French drain | 60 linear ft | $550 – $1,900 | −9% |
| Concrete slab | 400 sq ft | $2,200 – $4,700 | −10% |
| Concrete patio | 300 sq ft | $1,150 – $3,550 | −11% |
Add-ons priced for Greensboro
Extras are quoted nationally and then scaled to Greensboro by the average of the local wage index (0.88) and goods index (0.97), a factor of 0.92. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $550 – $1,100 |
When to schedule asphalt driveway in Greensboro
We use NOAA's 1991-2020 climate normals for Greensboro Wtp (in the city). These are 30-year monthly averages, not forecasts.
February through December is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Greensboro (11 of 12 months). January has an average overnight low at or below freezing (32°F).
In January the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 62 days a year with a low at or below 32°F at this station.
Greensboro gets about 46 inches of precipitation in a normal year. The wettest months are June, July and August (5.8 inches in July). Inside the workable window, February and November are the driest, at 2.5 and 3.0 inches. The station averages about 42 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 50 | 30 | 3.2 | Cold |
| Feb | 54 | 33 | 2.5 | Workable |
| Mar | 62 | 39 | 3.7 | Workable |
| Apr | 71 | 48 | 3.6 | Workable |
| May | 79 | 58 | 3.3 | Workable |
| Jun | 85 | 65 | 5.1 | Workable |
| Jul | 89 | 71 | 5.8 | Workable |
| Aug | 87 | 68 | 4.5 | Workable |
| Sep | 81 | 61 | 4.4 | Workable |
| Oct | 71 | 49 | 3.2 | Workable |
| Nov | 61 | 39 | 3.0 | Workable |
| Dec | 53 | 33 | 3.4 | Workable |
Specs and site conditions that change a Greensboro bid
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,050 to $5,650 for Greensboro, NC is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Greensboro, NC: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Greensboro: your questions
+How much does it cost to pave a driveway in Greensboro?
For 600 sq ft, expect $2,850 to $6,850 in the Greensboro area. A standard-spec job lands at $4,050 to $5,650. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Greensboro?
About $4.70 to $11 per sq ft for materials and labor, plus $45 to $190 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Greensboro or Burlington?
Burlington is 20 miles away. The midpoint for 600 sq ft there is $4,850, which is 0% more than Greensboro ($4,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greensboro?
About 38% at the midpoint, or $1,850 out of $4,850. Materials are 59% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Greensboro?
$2,850 to $6,850. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Greensboro?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $190 for fees in the Greensboro area (our national range of $50 to $200 scaled by the local price level).
+Is Greensboro expensive for asphalt driveway compared with the rest of North Carolina?
Greensboro is 1% below the North Carolina statewide estimate ($4,900 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Greensboro?
The BLS median is $24.00 an hour in the Greensboro area, compared with $25.64 nationally. The 25th to 75th percentile range is $20.91 to $24.60.
+What do basic and premium asphalt driveway work cost in Greensboro?
For 600 sq ft, basic work runs $2,850 to $4,450 and premium work $5,250 to $6,850. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Greensboro?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Greensboro?
$550 to $1,100 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Greensboro
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.