Gutters cost in Port St. Lucie, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,150 – $3,900
- Per linear ft
- $7.25 – $23
- before permit
- Versus US midpoint
- −8%
- US $2,750
- Rank of 300 metros
- #216
- 1 = most expensive
Port St. Lucie homeowners pay roughly $1,150 to $3,900 to install gutters at 160 linear ft, or $7.25 to $23 per linear ft (permit not included). Against the US midpoint, Port St. Lucie is 8% lower. Sheet metal workers earn a median of $23.87 an hour in the Port St. Lucie area, 20% below the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Port St. Lucie, FL, standard level
$2,000 to $3,050
About $12 to $18.50 per linear ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $750 | $1,000 |
| Permits and fees | $60 | $140 |
| Total | $2,000 | $3,050 |
Cost breakdown for 160 linear ft in Port St. Lucie, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 61% |
| Labor | $550 | $890 | $1,250 | 35% |
| Permits and fees | $0 | $100 | $200 | 4% |
| Total | $1,150 | $2,550 | $3,900 | 100% |
Where the Port St. Lucie price comes from
The wage side of the estimate leans on sheet metal workers, who do 40% of the hours on a typical job. Their local median is $23.87 an hour. Add the other trades involved and the blended wage index for Port St. Lucie is 0.85 (US = 1.00), which puts labor at 35% of the total. BLS does not publish this trade for the metro, so we used the Florida statewide median.
On the materials line, the BEA goods price index for the Port St. Lucie metro is 96.2 (US = 100). The midpoint materials bill for 160 linear ft comes to $1,550, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (100.2) and land at $0 to $200.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Port St. Lucie. The wage table below marks each row.
How Port St. Lucie compares
Of the five closest metros, 1 is cheaper than Port St. Lucie. Lakeland is the lowest at about $2,500 (midpoint, 160 linear ft), 90 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Port St. Lucie, FLthis page | $1,150 – $3,900 | $2,550 | |
| Sebastian, FL35 miles | $1,200 – $3,900 | $2,550 | +1% |
| Palm Bay, FL75 miles | $1,200 – $3,900 | $2,550 | +1% |
| Miami, FL80 miles | $1,250 – $4,150 | $2,700 | +7% |
| Lakeland, FL90 miles | $1,150 – $3,850 | $2,500 | −2% |
| Naples, FL95 miles | $1,200 – $3,950 | $2,550 | +1% |
| Florida (statewide) | $1,200 – $3,950 | $2,550 | +2% |
| United States | $1,300 – $4,200 | $2,750 | +8% |
Across 300 US metros, Port St. Lucie comes in at #216 from the top. The priciest is San Francisco, CA at $3,450; the cheapest is Longview, TX at $2,350 (midpoints, 160 linear ft). Statewide, Port St. Lucie is 2% below the Florida figure.
Other Florida metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $1,250 – $4,150 | $2,700 | +7% |
| Tampa, FL | 1,447,120 jobs | $1,150 – $3,900 | $2,500 | level |
| Orlando, FL | 1,411,730 jobs | $1,150 – $3,850 | $2,500 | −1% |
| Jacksonville, FL | 765,930 jobs | $1,150 – $3,900 | $2,550 | level |
| North Port, FL | 339,940 jobs | $1,150 – $3,900 | $2,550 | +1% |
| Cape Coral, FL | 304,790 jobs | $1,150 – $3,900 | $2,550 | level |
Cities with a workforce like Port St. Lucie's
Big cities and small ones price differently, so here is Port St. Lucie against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Visalia, CA | 171,140 jobs | $1,400 – $4,550 | $2,950 | +18% |
| Fort Collins, CO | 169,430 jobs | $1,200 – $3,950 | $2,600 | +2% |
| Mobile, AL | 172,550 jobs | $1,100 – $3,800 | $2,450 | −3% |
| Atlantic City, NJ | 168,700 jobs | $1,550 – $4,800 | $3,200 | +26% |
When to schedule gutters in Port St. Lucie
We use NOAA's 1991-2020 climate normals for Ft Pierce St Lucie Co Intl Ap (15 miles from the city center). These are 30-year monthly averages, not forecasts.
September through June is the stretch where exterior installation runs into the fewest weather problems in Port St. Lucie (10 of 12 months). July and August have an average daytime high of 90°F or more.
Port St. Lucie gets about 51 inches of precipitation in a normal year. The wettest months are June, August and September (6.9 inches in August). Inside the workable window, February and December are the driest, at 2.2 and 2.3 inches. The station averages about 67 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 73 | 51 | 2.8 | Workable |
| Feb | 76 | 54 | 2.2 | Workable |
| Mar | 78 | 57 | 2.9 | Workable |
| Apr | 82 | 61 | 3.0 | Workable |
| May | 86 | 67 | 3.9 | Workable |
| Jun | 89 | 71 | 6.7 | Workable |
| Jul | 90 | 73 | 5.8 | Hot |
| Aug | 90 | 73 | 6.9 | Hot |
| Sep | 88 | 73 | 6.3 | Workable |
| Oct | 84 | 69 | 5.3 | Workable |
| Nov | 79 | 61 | 3.0 | Workable |
| Dec | 75 | 56 | 2.3 | Workable |
Pick a size, pick a tier: gutters pricing in Port St. Lucie
Three bands are cut from the same cited range and localized for Port St. Lucie wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,150 to $2,250
Vinyl or sectional aluminum, single story
Standard
$2,000 to $3,050
Seamless aluminum K-style, standard downspouts
Premium
$2,800 to $3,900
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $870 – $1,700 | $1,500 – $2,350 | $2,150 – $2,950 |
| average house (160 linear ft) | $1,150 – $2,250 | $2,000 – $3,050 | $2,800 – $3,900 |
| large house (240 linear ft) | $1,750 – $3,350 | $2,950 – $4,550 | $4,150 – $5,750 |
Gutters: what moves the price in Port St. Lucie
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Port St. Lucie is 0.85 times the national level.
Sheet metal workers (47-2211) carry 40% of the labor weighting. BLS does not publish this trade for the Port St. Lucie metro, so we used the Florida statewide median: $23.87 an hour against $29.71 for the US. The middle half of them earn between $19.61 and $28.87 an hour.
For roofers (47-2181, weighted 30%) the local median is $22.88 an hour, which is 14% below the national $26.65. The middle half of them earn between $21.25 and $28.87 an hour. BLS counts 820 of them working in the area, 48.0 for every 10,000 jobs (US: 8.7), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $20.65 an hour, 9% below the US median of $22.66. The middle half of them earn between $17.85 and $22.86 an hour. About 2,310 work in the metro. That is 135.2 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the sheet metal workers on your job are paid at the 75th percentile ($28.87 an hour) instead of the median, the labor line grows by about $70. At the 25th percentile ($19.61) it shrinks by about $60. The total moves by 2.8% or 2.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 170,820 jobs in the Port St. Lucie area. That makes it the 137th largest of the 300 metros we cover, with 0.11% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $19.61 | $23.87 | $28.87 | $29.71 | 0.80 | state |
| Roofers (47-2181) | 30% | $21.25 | $22.88 | $28.87 | $26.65 | 0.86 | metro |
| Construction laborers (47-2061) | 30% | $17.85 | $20.65 | $22.86 | $22.66 | 0.91 | metro |
| Blended | 100% | 0.85 | |||||
What nearby projects cost in Port St. Lucie
Because every project leans on different trades, Port St. Lucie's wage level does not move all prices equally. Against the US midpoint, attic insulation runs −4% and vinyl siding −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,450 – $11,400 | −10% |
| Metal roof | 2,000 sq ft of roof | $8,900 – $29,500 | −10% |
| Vinyl siding | 2,100 sq ft of wall | $7,550 – $22,700 | −10% |
| French drain | 60 linear ft | $560 – $1,950 | −7% |
| Attic insulation | 1,000 sq ft | $960 – $3,850 | −4% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,000 to $3,050 for Port St. Lucie, FL is attached.
A detailed PDF report of this estimate, $9
The report lays out the gutters numbers for Port St. Lucie, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Port St. Lucie: your questions
+How much does it cost to install gutters in Port St. Lucie?
For 160 linear ft, expect $1,150 to $3,900 in the Port St. Lucie area. A standard-spec job lands at $2,000 to $3,050. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Port St. Lucie?
About $7.25 to $23 per linear ft for materials and labor, plus $0 to $200 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Port St. Lucie or Sebastian?
Sebastian is 35 miles away. The midpoint for 160 linear ft there is $2,550, which is 1% more than Port St. Lucie ($2,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Port St. Lucie?
About 35% at the midpoint, or $890 out of $2,550. Materials are 61% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Port St. Lucie?
$1,150 to $3,900. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Port St. Lucie?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $200 for fees in the Port St. Lucie area (our national range of $0 to $200 scaled by the local price level).
+Is Port St. Lucie expensive for gutters compared with the rest of Florida?
Port St. Lucie is 2% below the Florida statewide estimate ($2,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do sheet metal workers earn in Port St. Lucie?
BLS has no published metro figure here, so we use the statewide median of $23.87 an hour, compared with $29.71 nationally. The 25th to 75th percentile range is $19.61 to $28.87.
+What do basic and premium gutters work cost in Port St. Lucie?
For 160 linear ft, basic work runs $1,150 to $2,250 and premium work $2,800 to $3,900. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Port St. Lucie?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Port St. Lucie
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.