Gutters cost in Cape Coral, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,150 – $3,900
- Per linear ft
- $7.30 – $23
- before permit
- Versus US midpoint
- −7%
- US $2,750
- Rank of 300 metros
- #208
- 1 = most expensive
New gutters in Cape Coral, FL usually costs $1,150 to $3,900 for 160 linear ft. That works out to about $7.30 to $23 per linear ft before permits. Compared with the national midpoint that is $200 less. Sheet metal workers earn a median of $24.60 an hour in the Cape Coral area, 17% below the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Cape Coral, FL, standard level
$2,000 to $3,100
About $12 to $18.50 per linear ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $760 | $1,050 |
| Permits and fees | $60 | $140 |
| Total | $2,000 | $3,100 |
Cost breakdown for 160 linear ft in Cape Coral, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 61% |
| Labor | $550 | $890 | $1,250 | 35% |
| Permits and fees | $0 | $100 | $200 | 4% |
| Total | $1,150 | $2,550 | $3,900 | 100% |
Why Cape Coral prices look the way they do
The wage side of the estimate leans on sheet metal workers, who do 40% of the hours on a typical job. Their local median is $24.60 an hour. Add the other trades involved and the blended wage index for Cape Coral is 0.86 (US = 1.00), which puts labor at 35% of the total.
Materials are scaled with BEA's regional price parity for goods. Cape Coral is at 96.2 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 160 linear ft). Permits follow the all-items index of 102.3: $0 to $200.
Cost by quality level and size in Cape Coral
The cited range is split into basic, standard and premium bands, then scaled to Cape Coral. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,150 to $2,250
Vinyl or sectional aluminum, single story
Standard
$2,000 to $3,100
Seamless aluminum K-style, standard downspouts
Premium
$2,800 to $3,900
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $870 – $1,700 | $1,500 – $2,350 | $2,150 – $3,000 |
| average house (160 linear ft) | $1,150 – $2,250 | $2,000 – $3,100 | $2,800 – $3,900 |
| large house (240 linear ft) | $1,750 – $3,350 | $2,950 – $4,550 | $4,150 – $5,750 |
Cape Coral against nearby metros and the rest of Florida
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 160 linear ft range from $2,500 to $2,700 across Cape Coral and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Cape Coral, FLthis page | $1,150 – $3,900 | $2,550 | |
| Punta Gorda, FL25 miles | $1,150 – $3,900 | $2,550 | level |
| Naples, FL45 miles | $1,200 – $3,950 | $2,550 | +1% |
| North Port, FL60 miles | $1,150 – $3,900 | $2,550 | level |
| Lakeland, FL100 miles | $1,150 – $3,850 | $2,500 | −2% |
| Miami, FL100 miles | $1,250 – $4,150 | $2,700 | +6% |
| Florida (statewide) | $1,200 – $3,950 | $2,550 | +1% |
| United States | $1,300 – $4,200 | $2,750 | +8% |
Out of the 300 metros we cover, Cape Coral ranks #208 for the cost of this job (#1 is the most expensive). Statewide, Cape Coral is 1% below the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $1,250 – $4,150 | $2,700 | +6% |
| Tampa, FL | 1,447,120 jobs | $1,150 – $3,900 | $2,500 | −1% |
| Orlando, FL | 1,411,730 jobs | $1,150 – $3,850 | $2,500 | −1% |
| Jacksonville, FL | 765,930 jobs | $1,150 – $3,900 | $2,550 | level |
| North Port, FL | 339,940 jobs | $1,150 – $3,900 | $2,550 | level |
| Lakeland, FL | 265,280 jobs | $1,150 – $3,850 | $2,500 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Cape Coral against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Wichita, KS | 308,570 jobs | $1,150 – $3,800 | $2,450 | −3% |
| Provo, UT | 304,660 jobs | $1,250 – $4,050 | $2,650 | +4% |
| Colorado Springs, CO | 316,060 jobs | $1,150 – $3,900 | $2,550 | level |
| Syracuse, NY | 300,130 jobs | $1,300 – $4,250 | $2,800 | +10% |
What local crews earn in Cape Coral
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Cape Coral the blend is 0.86.
Sheet metal workers (47-2211), 40% of the weighting: a median of $24.60 an hour, 17% below the US median of $29.71. The middle half of them earn between $22.79 and $28.67 an hour. About 550 work in the metro. That is 18.0 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
Roofers (47-2181), 30% of the weighting: a median of $22.54 an hour, 15% below the US median of $26.65. The middle half of them earn between $18.08 and $24.80 an hour. About 1,900 work in the metro. That is 62.3 per 10,000 jobs, compared with 8.7 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $20.81 an hour, which is 8% below the national $22.66. The middle half of them earn between $17.90 and $22.80 an hour. BLS counts 5,230 of them working in the area, 171.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $55 to the midpoint estimate; the 25th percentile takes off about $25. That is a swing of roughly 1.0% to 2.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Cape Coral-Fort Myers has 304,790 jobs in total (BLS, May 2025), ranking 83rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $22.79 | $24.60 | $28.67 | $29.71 | 0.83 | metro |
| Roofers (47-2181) | 30% | $18.08 | $22.54 | $24.80 | $26.65 | 0.85 | metro |
| Construction laborers (47-2061) | 30% | $17.90 | $20.81 | $22.80 | $22.66 | 0.92 | metro |
| Blended | 100% | 0.86 | |||||
Related projects, priced for Cape Coral
Jobs that often go together with gutters are priced below at their usual sizes, using the same Cape Coral wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−4%) and roof replacement lowest (−10%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,400 – $11,300 | −10% |
| Metal roof | 2,000 sq ft of roof | $8,850 – $29,500 | −10% |
| Vinyl siding | 2,100 sq ft of wall | $7,600 – $22,800 | −10% |
| French drain | 60 linear ft | $560 – $1,950 | −7% |
| Attic insulation | 1,000 sq ft | $960 – $3,850 | −4% |
Why two Cape Coral quotes can differ
Permit
Local building codes may add $50-$200, though most cities don't require one.
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Cape Coral weather and the gutters calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Ft Myers Page Fld Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Cape Coral are October through April: 7 of 12. Outside them, May, June, July, August and September have an average daytime high of 90°F or more.
Cape Coral gets about 57 inches of precipitation in a normal year. The wettest months are June, July and August (10.4 inches in August). Inside the workable window, February and November are the driest, at 1.8 and 1.8 inches. The station averages about 120 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 75 | 54 | 2.4 | Workable |
| Feb | 78 | 57 | 1.8 | Workable |
| Mar | 81 | 60 | 2.1 | Workable |
| Apr | 85 | 64 | 2.4 | Workable |
| May | 90 | 69 | 3.5 | Hot |
| Jun | 91 | 74 | 9.7 | Hot |
| Jul | 92 | 75 | 9.4 | Hot |
| Aug | 92 | 75 | 10.4 | Hot |
| Sep | 90 | 74 | 9.0 | Hot |
| Oct | 87 | 69 | 3.1 | Workable |
| Nov | 81 | 62 | 1.8 | Workable |
| Dec | 77 | 57 | 1.9 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,000 to $3,100 for Cape Coral, FL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Cape Coral, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Cape Coral: your questions
+How much does it cost to install gutters in Cape Coral?
For 160 linear ft, expect $1,150 to $3,900 in the Cape Coral area. A standard-spec job lands at $2,000 to $3,100. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Cape Coral?
About $7.30 to $23 per linear ft for materials and labor, plus $0 to $200 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Cape Coral or Punta Gorda?
Punta Gorda is 25 miles away. The midpoint for 160 linear ft there is $2,550, which is 0% more than Cape Coral ($2,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Cape Coral?
About 35% at the midpoint, or $890 out of $2,550. Materials are 61% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Cape Coral?
$1,150 to $3,900. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Cape Coral?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $200 for fees in the Cape Coral area (our national range of $0 to $200 scaled by the local price level).
+Is Cape Coral expensive for gutters compared with the rest of Florida?
Cape Coral is 1% below the Florida statewide estimate ($2,550 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do sheet metal workers earn in Cape Coral?
The BLS median is $24.60 an hour in the Cape Coral area, compared with $29.71 nationally. The 25th to 75th percentile range is $22.79 to $28.67.
+What do basic and premium gutters work cost in Cape Coral?
For 160 linear ft, basic work runs $1,150 to $2,250 and premium work $2,800 to $3,900. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Cape Coral?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through April. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Cape Coral
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.