Skip to content
CostLocal

Metal roof cost in Port St. Lucie, FL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (2,000 sq ft of roof)
$8,900 – $29,500
Per sq ft of roof
$4.35 – $14.50
before permit
Versus US midpoint
−10%
US $21,300
Rank of 300 metros
#211
1 = most expensive

If you want to install a metal roof in Port St. Lucie, plan on $8,900 to $29,500 for 2,000 sq ft of roof, all in. Per sq ft of roof, that is $4.35 to $14.50 for materials and labor, with the permit on top. The local midpoint runs 10% lower than the national one. Roofers earn a median of $22.88 an hour in the Port St. Lucie area, 14% below the US median of $26.65.

Estimate your metal roof cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Standing seam steel

Estimated cost for 2,000 sq ft of roof in Port St. Lucie, FL, standard level

$15,100 to $23,400

About $7.40 to $11.50 per sq ft of roof before permits. Labor is about 53% of the bill.

Cost breakdown
PartLowHigh
Materials$5,950$11,400
Labor$8,850$11,600
Permits and fees$260$400
Total$15,100$23,400
Save and get a PDF report

Cost breakdown for 2,000 sq ft of roof in Port St. Lucie, FL

Part of the jobLowMidpointHighShare
Materials$1,900$8,650$15,40045%
Labor$6,800$10,200$13,60053%
Permits and fees$150$330$5002%
Total$8,900$19,200$29,500100%

What is behind the Port St. Lucie number

The wage side of the estimate leans on roofers, who do 70% of the hours on a typical job. Their local median is $22.88 an hour. Add the other trades involved and the blended wage index for Port St. Lucie is 0.85 (US = 1.00), which puts labor at 53% of the total.

On the materials line, the BEA goods price index for the Port St. Lucie metro is 96.2 (US = 100). The midpoint materials bill for 2,000 sq ft of roof comes to $8,650, compared with $9,000 at national prices. Permit and inspection fees are scaled by the broader index (100.2) and land at $150 to $500.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Port St. Lucie. The wage table below marks each row.

Pick a size, pick a tier: metal roof pricing in Port St. Lucie

Three bands are cut from the same cited range and localized for Port St. Lucie wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$8,900 to $17,200

Corrugated or exposed-fastener steel panels

Standard

$15,100 to $23,400

Standing seam steel

Premium

$21,300 to $29,500

Aluminum or premium finish, complex roof

Cost by size and quality level
SizeBasicStandardPremium
small (1,200 sq ft of roof)$5,400 – $10,400$9,150 – $14,200$12,900 – $17,900
average (2,000 sq ft of roof)$8,900 – $17,200$15,100 – $23,400$21,300 – $29,500
large (2,800 sq ft of roof)$12,400 – $23,900$21,000 – $32,500$29,700 – $41,200

How Port St. Lucie compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,000 sq ft of roof range from $18,900 to $20,100 across Port St. Lucie and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Port St. Lucie, FLthis page$8,900 – $29,500$19,200
Sebastian, FL35 miles$9,100 – $29,900$19,500+2%
Palm Bay, FL75 miles$9,000 – $29,700$19,400+1%
Miami, FL80 miles$9,200 – $31,100$20,100+5%
Lakeland, FL90 miles$8,700 – $29,100$18,900−2%
Naples, FL95 miles$9,150 – $30,000$19,600+2%
Florida (statewide)$8,950 – $29,900$19,400+1%
United States$10,200 – $32,500$21,300+11%

Across 300 US metros, Port St. Lucie comes in at #211 from the top. The priciest is Worcester, MA at $29,600; the cheapest is Lubbock, TX at $17,000 (midpoints, 2,000 sq ft of roof). Statewide, Port St. Lucie is 1% below the Florida figure.

Other Florida metros

Florida metros compared with Port St. Lucie
MetroSizeRangeMidpointvs. here
Miami, FL2,819,940 jobs$9,200 – $31,100$20,100+5%
Tampa, FL1,447,120 jobs$8,850 – $29,400$19,100−1%
Orlando, FL1,411,730 jobs$8,800 – $29,400$19,100−1%
Jacksonville, FL765,930 jobs$8,900 – $29,500$19,200level
North Port, FL339,940 jobs$9,050 – $29,900$19,500+1%
Cape Coral, FL304,790 jobs$8,850 – $29,500$19,200level

Cities with a workforce like Port St. Lucie's

Big cities and small ones price differently, so here is Port St. Lucie against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Visalia, CA171,140 jobs$11,100 – $35,000$23,100+20%
Fort Collins, CO169,430 jobs$9,150 – $30,000$19,600+2%
Mobile, AL172,550 jobs$8,500 – $28,800$18,600−3%
Atlantic City, NJ168,700 jobs$13,600 – $39,300$26,400+37%

Port St. Lucie labor market for metal roof

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Port St. Lucie is 0.85 times the national level.

For roofers (47-2181, weighted 70%) the local median is $22.88 an hour, which is 14% below the national $26.65. The middle half of them earn between $21.25 and $28.87 an hour. BLS counts 820 of them working in the area, 48.0 for every 10,000 jobs (US: 8.7), so the local bench is deeper than average.

Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the Port St. Lucie metro, so we used the Florida statewide median: $23.87 an hour against $29.71 for the US. The middle half of them earn between $19.61 and $28.87 an hour.

Construction laborers (47-2061), 10% of the weighting: a median of $20.65 an hour, 9% below the US median of $22.66. The middle half of them earn between $17.85 and $22.86 an hour. About 2,310 work in the metro. That is 135.2 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

Quotes come from real crews, not medians. If the roofers on your job are paid at the 75th percentile ($28.87 an hour) instead of the median, the labor line grows by about $1,900. At the 25th percentile ($21.25) it shrinks by about $510. The total moves by 9.8% or 2.7%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 170,820 jobs in the Port St. Lucie area. That makes it the 137th largest of the 300 metros we cover, with 0.11% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Roofers (47-2181)70%$21.25$22.88$28.87$26.650.86metro
Sheet metal workers (47-2211)20%$19.61$23.87$28.87$29.710.80state
Construction laborers (47-2061)10%$17.85$20.65$22.86$22.660.91metro
Blended100%0.85

Planning more than one job in Port St. Lucie?

Because every project leans on different trades, Port St. Lucie's wage level does not move all prices equally. Against the US midpoint, attic insulation runs −4% and vinyl siding −10%.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,450 – $11,400−10%
Gutters160 linear ft$1,150 – $3,900−8%
Attic insulation1,000 sq ft$960 – $3,850−4%
Vinyl siding2,100 sq ft of wall$7,550 – $22,700−10%

Climate in Port St. Lucie: timing your metal roof job

We use NOAA's 1991-2020 climate normals for Ft Pierce St Lucie Co Intl Ap (15 miles from the city center). These are 30-year monthly averages, not forecasts.

September through June is the stretch where exterior installation runs into the fewest weather problems in Port St. Lucie (10 of 12 months). July and August have an average daytime high of 90°F or more.

Port St. Lucie gets about 51 inches of precipitation in a normal year. The wettest months are June, August and September (6.9 inches in August). Inside the workable window, February and December are the driest, at 2.2 and 2.3 inches. The station averages about 67 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Ft Pierce St Lucie Co Intl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan73512.8Workable
Feb76542.2Workable
Mar78572.9Workable
Apr82613.0Workable
May86673.9Workable
Jun89716.7Workable
Jul90735.8Hot
Aug90736.9Hot
Sep88736.3Workable
Oct84695.3Workable
Nov79613.0Workable
Dec75562.3Workable

Metal roof: what moves the price in Port St. Lucie

  • Labor

    Metal roof labor is $4-$8 per sq ft, or $400-$800 per roofing square, and standing seam needs specialist crews.

  • Other metals

    Tin runs $600-$1,800 per roofing square (100 sq ft) installed and aluminum $700-$1,700 per square (HomeGuide).

  • Panel type

    Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $15,100 to $23,400 for Port St. Lucie, FL is attached.

Take this estimate with you: PDF report, $9

The report lays out the metal roof numbers for Port St. Lucie, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Metal roof in Port St. Lucie: your questions

+How much does it cost to install a metal roof in Port St. Lucie?

For 2,000 sq ft of roof, expect $8,900 to $29,500 in the Port St. Lucie area. A standard-spec job lands at $15,100 to $23,400. Small jobs usually cost more per sq ft of roof and large ones less.

+What is the price per sq ft of roof for metal roof in Port St. Lucie?

About $4.35 to $14.50 per sq ft of roof for materials and labor, plus $150 to $500 for the permit if one is needed. The US range is $5 to $16.

+Is metal roof cheaper in Port St. Lucie or Sebastian?

Sebastian is 35 miles away. The midpoint for 2,000 sq ft of roof there is $19,500, which is 2% more than Port St. Lucie ($19,200). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Port St. Lucie?

About 53% at the midpoint, or $10,200 out of $19,200. Materials are 45% and permits 2%. Nationally, labor is 56%.

+What would average (2,000 sq ft of roof) cost in Port St. Lucie?

$8,900 to $29,500. Pick a different size in the estimator above to get your own number.

+Does metal roof need a permit in Port St. Lucie?

Often, but rules are set by your city or county building office, so call before you hire. Budget $150 to $500 for fees in the Port St. Lucie area (our national range of $150 to $500 scaled by the local price level).

+Is Port St. Lucie expensive for metal roof compared with the rest of Florida?

Port St. Lucie is 1% below the Florida statewide estimate ($19,400 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.

+What do roofers earn in Port St. Lucie?

The BLS median is $22.88 an hour in the Port St. Lucie area, compared with $26.65 nationally. The 25th to 75th percentile range is $21.25 to $28.87.

+What do basic and premium metal roof work cost in Port St. Lucie?

For 2,000 sq ft of roof, basic work runs $8,900 to $17,200 and premium work $21,300 to $29,500. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.

+When is the best time to install a metal roof in Port St. Lucie?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Metal roof near Port St. Lucie

Metal roof: all pricesMetal roof in FloridaAll projects in Port St. LucieFlorida cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.