Metal roof cost in Miami, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $9,200 – $31,100
- Per sq ft of roof
- $4.50 – $15
- before permit
- Versus US midpoint
- −6%
- US $21,300
- Rank of 300 metros
- #145
- 1 = most expensive
Local price for a metal roof in the Miami area: $9,200 to $31,100 for 2,000 sq ft of roof. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Roofers earn a median of $23.09 an hour in the Miami area, 13% below the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Miami, FL, standard level
$15,800 to $24,500
About $7.75 to $12 per sq ft of roof before permits. Labor is about 52% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,400 | $12,200 |
| Labor | $9,050 | $11,800 |
| Permits and fees | $290 | $450 |
| Total | $15,800 | $24,500 |
Cost breakdown for 2,000 sq ft of roof in Miami, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,050 | $9,300 | $16,600 | 46% |
| Labor | $6,950 | $10,400 | $13,900 | 52% |
| Permits and fees | $170 | $370 | $570 | 2% |
| Total | $9,200 | $20,100 | $31,100 | 100% |
Why Miami prices look the way they do
We price the labor side from BLS wage data for 3 trades: roofers at 70%, sheet metal workers at 20%, construction laborers at 10%. Weighted together, Miami wages are 0.87 times the national level. Labor makes up about 52% of the midpoint estimate (56% at national prices).
Materials are scaled with BEA's regional price parity for goods. Miami is at 103.6 against 100 for the US, so a materials line of $9,000 nationally becomes $9,300 here (midpoint, 2,000 sq ft of roof). Permits follow the all-items index of 114.2: $170 to $570.
Metal roof: what moves the price in Miami
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Labor
Metal roof labor is $4-$8 per sq ft, or $400-$800 per roofing square, and standing seam needs specialist crews.
Other metals
Tin runs $600-$1,800 per roofing square (100 sq ft) installed and aluminum $700-$1,700 per square (HomeGuide).
Planning more than one job in Miami?
Jobs that often go together with metal roof are priced below at their usual sizes, using the same Miami wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+2%) and roof replacement lowest (−6%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,650 – $11,900 | −6% |
| Gutters | 160 linear ft | $1,250 – $4,150 | −2% |
| Attic insulation | 1,000 sq ft | $1,000 – $4,050 | +2% |
| Vinyl siding | 2,100 sq ft of wall | $8,050 – $24,200 | −4% |
Is Miami cheap or dear? The local comparison
Same job, same size (2,000 sq ft of roof), priced for the nearest metros. Miami is the priciest of the group. Cape Coral is the cheapest at $19,200.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Miami, FLthis page | $9,200 – $31,100 | $20,100 | |
| Naples, FL55 miles | $9,150 – $30,000 | $19,600 | −3% |
| Port St. Lucie, FL80 miles | $8,900 – $29,500 | $19,200 | −5% |
| Cape Coral, FL100 miles | $8,850 – $29,500 | $19,200 | −5% |
| Punta Gorda, FL110 miles | $8,950 – $29,600 | $19,300 | −4% |
| Sebastian, FL110 miles | $9,100 – $29,900 | $19,500 | −3% |
| Florida (statewide) | $8,950 – $29,900 | $19,400 | −4% |
| United States | $10,200 – $32,500 | $21,300 | +6% |
Out of the 300 metros we cover, Miami ranks #145 for the cost of this job (#1 is the most expensive). Statewide, Miami is 4% above the Florida figure.
Elsewhere in Florida
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Tampa, FL | 1,447,120 jobs | $8,850 – $29,400 | $19,100 | −5% |
| Orlando, FL | 1,411,730 jobs | $8,800 – $29,400 | $19,100 | −5% |
| Jacksonville, FL | 765,930 jobs | $8,900 – $29,500 | $19,200 | −5% |
| North Port, FL | 339,940 jobs | $9,050 – $29,900 | $19,500 | −3% |
| Cape Coral, FL | 304,790 jobs | $8,850 – $29,500 | $19,200 | −5% |
| Lakeland, FL | 265,280 jobs | $8,700 – $29,100 | $18,900 | −6% |
Metros of a similar size
Big cities and small ones price differently, so here is Miami against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $9,300 – $30,900 | $20,100 | level |
| Boston, MA | 2,703,890 jobs | $12,100 – $36,300 | $24,200 | +20% |
| Philadelphia, PA | 2,897,830 jobs | $11,100 – $33,900 | $22,500 | +12% |
| Phoenix, AZ | 2,375,760 jobs | $9,000 – $29,600 | $19,300 | −4% |
Who does the work: Miami trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Miami the blend is 0.87.
Roofers (47-2181), 70% of the weighting: a median of $23.09 an hour, 13% below the US median of $26.65. The middle half of them earn between $18.29 and $25.06 an hour. About 5,290 work in the metro. That is 18.8 per 10,000 jobs, compared with 8.7 nationally, which suggests plenty of local crews to bid.
Sheet metal workers (47-2211), 20% of the weighting: a median of $24.86 an hour, 16% below the US median of $29.71. The middle half of them earn between $22.38 and $30.10 an hour. About 1,780 work in the metro. That is 6.3 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 10%) the local median is $21.88 an hour, which is 3% below the national $22.66. The middle half of them earn between $18.33 and $23.61 an hour. BLS counts 18,280 of them working in the area, 64.8 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (roofers) from the median to the 75th percentile wage adds about $620 to the midpoint estimate; the 25th percentile takes off about $1,500. That is a swing of roughly 7.5% to 3.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Miami-Fort Lauderdale-West Palm Beach has 2,819,940 jobs in total (BLS, May 2025), ranking 9th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $18.29 | $23.09 | $25.06 | $26.65 | 0.87 | metro |
| Sheet metal workers (47-2211) | 20% | $22.38 | $24.86 | $30.10 | $29.71 | 0.84 | metro |
| Construction laborers (47-2061) | 10% | $18.33 | $21.88 | $23.61 | $22.66 | 0.97 | metro |
| Blended | 100% | 0.87 | |||||
The best months for metal roof in Miami
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Miami Beach (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Miami: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Miami gets about 57 inches of precipitation in a normal year. The wettest months are June, August and September (8.4 inches in September). The station averages about 30 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 74 | 61 | 2.3 | Workable |
| Feb | 75 | 63 | 2.3 | Workable |
| Mar | 77 | 65 | 2.5 | Workable |
| Apr | 80 | 70 | 3.4 | Workable |
| May | 83 | 74 | 4.9 | Workable |
| Jun | 86 | 77 | 7.8 | Workable |
| Jul | 88 | 78 | 6.0 | Workable |
| Aug | 88 | 78 | 7.5 | Workable |
| Sep | 87 | 77 | 8.4 | Workable |
| Oct | 84 | 74 | 6.5 | Workable |
| Nov | 79 | 69 | 3.3 | Workable |
| Dec | 76 | 65 | 2.3 | Workable |
Pick a size, pick a tier: metal roof pricing in Miami
The cited range is split into basic, standard and premium bands, then scaled to Miami. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small (1,200 sq ft of roof) to large (2,800 sq ft of roof).
Basic
$9,200 to $17,900
Corrugated or exposed-fastener steel panels
Standard
$15,800 to $24,500
Standing seam steel
Premium
$22,300 to $31,100
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $5,600 – $10,900 | $9,550 – $14,900 | $13,600 – $18,900 |
| average (2,000 sq ft of roof) | $9,200 – $17,900 | $15,800 – $24,500 | $22,300 – $31,100 |
| large (2,800 sq ft of roof) | $12,800 – $25,000 | $22,000 – $34,100 | $31,100 – $43,300 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $15,800 to $24,500 for Miami, FL is attached.
A detailed PDF report of this estimate, $9
The report lays out the metal roof numbers for Miami, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Miami: your questions
+How much does it cost to install a metal roof in Miami?
For 2,000 sq ft of roof, expect $9,200 to $31,100 in the Miami area. A standard-spec job lands at $15,800 to $24,500. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Miami?
About $4.50 to $15 per sq ft of roof for materials and labor, plus $170 to $570 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Miami or Naples?
Naples is 55 miles away. The midpoint for 2,000 sq ft of roof there is $19,600, which is 3% less than Miami ($20,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Miami?
About 52% at the midpoint, or $10,400 out of $20,100. Materials are 46% and permits 2%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Miami?
$9,200 to $31,100. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Miami?
Often, but rules are set by your city or county building office, so call before you hire. Budget $170 to $570 for fees in the Miami area (our national range of $150 to $500 scaled by the local price level).
+Is Miami expensive for metal roof compared with the rest of Florida?
Miami is 4% above the Florida statewide estimate ($19,400 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do roofers earn in Miami?
The BLS median is $23.09 an hour in the Miami area, compared with $26.65 nationally. The 25th to 75th percentile range is $18.29 to $25.06.
+What do basic and premium metal roof work cost in Miami?
For 2,000 sq ft of roof, basic work runs $9,200 to $17,900 and premium work $22,300 to $31,100. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+Is there a bad season to install a metal roof in Miami?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
Metal roof near Miami
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.