Skip to content
CostLocal

Concrete slab cost in Scranton, PA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (400 sq ft)
$2,450 – $5,200
Per sq ft
$6.05 – $12
before permit
Versus US midpoint
+1%
US $3,850
Rank of 300 metros
#108
1 = most expensive

Local price for a concrete slab in the Scranton area: $2,450 to $5,200 for 400 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Cement masons and concrete finishers earn a median of $27.89 an hour in the Scranton area, 2% above the US median of $27.41.

Estimate your concrete slab cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

4-5 inch slab with rebar or heavier mesh and standard base prep

Add-ons

Estimated cost for 400 sq ft in Scranton, PA, standard level

$3,300 to $4,400

About $7.90 to $10.50 per sq ft before permits. Labor is about 42% of the bill.

Cost breakdown
PartLowHigh
Materials$1,700$2,350
Labor$1,450$1,800
Permits and fees$150$280
Total$3,300$4,400
Save and get a PDF report

Cost breakdown for 400 sq ft in Scranton, PA

Part of the jobLowMidpointHighShare
Materials$1,200$2,000$2,80052%
Labor$1,200$1,600$2,05042%
Permits and fees$45$210$3705%
Total$2,450$3,850$5,200100%

Why Scranton prices look the way they do

We price the labor side from BLS wage data for 4 trades: cement masons and concrete finishers at 50%, construction laborers at 30%, operating engineers and other construction equipment operators at 10%, carpenters at 10%. Weighted together, Scranton wages are 1.01 times the national level. Labor makes up about 42% of the midpoint estimate (42% at national prices).

Materials are scaled with BEA's regional price parity for goods. Scranton is at 100.7 against 100 for the US, so a materials line of $2,000 nationally becomes $2,000 here (midpoint, 400 sq ft). Permits follow the all-items index of 93.6: $45 to $370.

Cost by quality level and size in Scranton

The cited range is split into basic, standard and premium bands, then scaled to Scranton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x10 pad (100 sq ft) to 30x40 foundation (1,200 sq ft).

Basic

$2,450 to $3,550

4-inch broom-finish slab, light mesh, easy truck access

Standard

$3,300 to $4,400

4-5 inch slab with rebar or heavier mesh and standard base prep

Premium

$4,100 to $5,200

6-inch slab, heavy reinforcement, thick base, pump truck or tight access

Cost by size and quality level
SizeBasicStandardPremium
10x10 pad (100 sq ft)$650 – $1,050$930 – $1,300$1,200 – $1,600
12x12 (144 sq ft)$920 – $1,400$1,300 – $1,750$1,650 – $2,100
20x20 (400 sq ft)$2,450 – $3,550$3,300 – $4,400$4,100 – $5,200
24x24 garage floor (576 sq ft)$3,550 – $5,050$4,700 – $6,200$5,850 – $7,350
30x40 foundation (1,200 sq ft)$7,300 – $10,400$9,600 – $12,600$11,900 – $14,900

The best months for concrete slab in Scranton

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Wilkes-Barre Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For pouring concrete, the comfortable months in Scranton are May through October: 6 of 12. Outside them, January, February, March, April, November and December have an average overnight low of 40°F or below.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Scranton gets about 39 inches of precipitation in a normal year, including roughly 45 inches of snow. The wettest months are June, August and September (4.2 inches in September). Inside the workable window, May and July are the driest, at 3.3 and 3.6 inches. The station averages about 12 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Wilkes-Barre Intl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan36202.6Cold
Feb39222.1Cold
Mar48292.8Cold
Apr61393.3Cold
May72503.3Workable
Jun80583.8Workable
Jul85633.6Workable
Aug82613.9Workable
Sep75544.2Workable
Oct63433.7Workable
Nov51342.9Cold
Dec40262.8Cold

Specs and site conditions that change a Scranton bid

  • Truck and pump access

    If the mixer truck can't back up to the forms, someone has to wheelbarrow it in or hire a pump. Pump or line-pump hire is typically billed per day.

  • Small-job minimums

    Many crews have a minimum charge, so a 10x10 pad can cost more per square foot than a 20x20 slab.

  • Finish

    A broom finish is the baseline. Stamped, stained, or exposed-aggregate finishes are priced as add-ons on top of the slab.

Who does the work: Scranton trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 4 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Scranton the blend is 1.01.

Cement masons and concrete finishers (47-2051), 50% of the weighting: a median of $27.89 an hour, in line with the US median of $27.41. The middle half of them earn between $22.23 and $33.20 an hour. About 140 work in the metro. That is 5.5 per 10,000 jobs, compared with 13.3 nationally, so expect fewer local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $23.22 an hour, which is in line with the national $22.66. The middle half of them earn between $19.53 and $28.89 an hour. BLS counts 1,450 of them working in the area, 56.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $28.52 an hour, in line with the US median of $28.78. The middle half of them earn between $24.92 and $35.72 an hour. About 950 work in the metro. That is 37.2 per 10,000 jobs, compared with 30.7 nationally, which suggests plenty of local crews to bid.

Carpenters (47-2031), 10% of the weighting: a median of $28.96 an hour, in line with the US median of $29.12. The middle half of them earn between $23.00 and $35.74 an hour. About 1,070 work in the metro. That is 41.9 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.

A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $150 to the midpoint estimate; the 25th percentile takes off about $170. That is a swing of roughly 4.3% to 4.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Scranton--Wilkes-Barre has 255,620 jobs in total (BLS, May 2025), ranking 102nd by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)50%$22.23$27.89$33.20$27.411.02metro
Construction laborers (47-2061)30%$19.53$23.22$28.89$22.661.02metro
Operating engineers and other construction equipment operators (47-2073)10%$24.92$28.52$35.72$28.780.99metro
Carpenters (47-2031)10%$23.00$28.96$35.74$29.120.99metro
Blended100%1.01

Is Scranton cheap or dear? The local comparison

Of the five closest metros, none is cheaper than Scranton. Reading comes closest at about $3,900.

Comparison with nearby areas
AreaRangeMidpointvs. here
Scranton, PAthis page$2,450 – $5,200$3,850
Allentown, PA45 miles$2,550 – $5,350$3,950+3%
Binghamton, NY60 miles$2,550 – $5,300$3,900+2%
Reading, PA65 miles$2,500 – $5,250$3,900+1%
Lancaster, PA90 miles$2,500 – $5,250$3,900+1%
Harrisburg, PA90 miles$2,500 – $5,300$3,900+1%
Pennsylvania (statewide)$2,500 – $5,300$3,900+1%
United States$2,450 – $5,200$3,850−1%

Out of the 300 metros we cover, Scranton ranks #108 for the cost of this job (#1 is the most expensive). Statewide, Scranton is 1% below the Pennsylvania figure.

Elsewhere in Pennsylvania

Pennsylvania metros compared with Scranton
MetroSizeRangeMidpointvs. here
Philadelphia, PA2,897,830 jobs$2,550 – $5,300$3,950+2%
Pittsburgh, PA1,114,490 jobs$2,550 – $5,350$3,950+3%
Allentown, PA377,180 jobs$2,550 – $5,350$3,950+3%
Harrisburg, PA335,010 jobs$2,500 – $5,300$3,900+1%
Lancaster, PA252,230 jobs$2,500 – $5,250$3,900+1%
York, PA183,590 jobs$2,500 – $5,300$3,900+1%

Metros of a similar size

Big cities and small ones price differently, so here is Scranton against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Spokane, WA255,820 jobs$2,750 – $5,750$4,250+11%
Lancaster, PA252,230 jobs$2,500 – $5,250$3,900+1%
Lakeland, FL265,280 jobs$2,200 – $4,750$3,450−10%
Palm Bay, FL245,170 jobs$2,250 – $4,800$3,550−8%

Related projects, priced for Scranton

Jobs that often go together with concrete slab are priced below at their usual sizes, using the same Scranton wage and price inputs. Compared with national midpoints, asphalt driveway comes out highest (+1%) and concrete patio lowest (level); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Concrete driveway600 sq ft$3,700 – $9,300+1%
Concrete patio300 sq ft$1,250 – $4,000level
Detached garage576 sq ft$29,100 – $58,400+1%
Stamped concrete400 sq ft$3,300 – $8,000+1%
Asphalt driveway600 sq ft$3,100 – $7,500+1%
Gravel driveway1,000 sq ft$2,500 – $10,300+1%

Optional extras in Scranton

Add-ons start from national price ranges and are scaled by 1.01 for Scranton, which is the average of the area's wage index (1.01) and goods price index (1.01). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add rebar reinforcement$400 – $1,200
Remove old concrete first$810 – $2,450

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,300 to $4,400 for Scranton, PA is attached.

Detailed concrete slab report for Scranton, PA, $9

The report lays out the concrete slab numbers for Scranton, PA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Concrete slab in Scranton: your questions

+How much does it cost to pour a concrete slab in Scranton?

For 400 sq ft, expect $2,450 to $5,200 in the Scranton area. A standard-spec job lands at $3,300 to $4,400. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for concrete slab in Scranton?

About $6.05 to $12 per sq ft for materials and labor, plus $45 to $370 for the permit if one is needed. The US range is $6 to $12.

+Is concrete slab cheaper in Scranton or Allentown?

Allentown is 45 miles away. The midpoint for 400 sq ft there is $3,950, which is 3% more than Scranton ($3,850). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Scranton?

About 42% at the midpoint, or $1,600 out of $3,850. Materials are 52% and permits 5%. Nationally, labor is 42%.

+What would 20x20 (400 sq ft) cost in Scranton?

$2,450 to $5,200. Pick a different size in the estimator above to get your own number.

+Does concrete slab need a permit in Scranton?

Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $370 for fees in the Scranton area (our national range of $50 to $400 scaled by the local price level).

+Is Scranton expensive for concrete slab compared with the rest of Pennsylvania?

Scranton is 1% below the Pennsylvania statewide estimate ($3,900 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.

+What do cement masons and concrete finishers earn in Scranton?

The BLS median is $27.89 an hour in the Scranton area, compared with $27.41 nationally. The 25th to 75th percentile range is $22.23 to $33.20.

+What do basic and premium concrete slab work cost in Scranton?

For 400 sq ft, basic work runs $2,450 to $3,550 and premium work $4,100 to $5,200. Basic means: 4-inch broom-finish slab, light mesh, easy truck access. Premium means: 6-inch slab, heavy reinforcement, thick base, pump truck or tight access.

+When is the best time to pour a concrete slab in Scranton?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are May through October. May and July are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add rebar reinforcement" add in Scranton?

$400 to $1,200 for 400 sq ft, from a national range scaled by the local wage and goods indexes.

Concrete slab near Scranton

Concrete slab: all pricesConcrete slab in PennsylvaniaAll projects in ScrantonPennsylvania cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.