Skip to content
CostLocal

Concrete driveway cost in Washington

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (600 sq ft)
$4,400 – $11,300
Per sq ft
$7.25 – $18.50
before permit
Versus US midpoint
+22%
US $6,450
Metros covered
7

What does it cost to pour a concrete driveway in Washington? Plan on $4,400 to $11,300 for 600 sq ft. Wages (1.31x the US blend), materials (price index 104.4) and permit costs (107.0) put the state above the national midpoint by 22%.

Inside Washington, the metros we cover range from $7,450 (Spokane) to $8,150 (Seattle) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your concrete driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

5-inch with rebar and saw-cut joints, a border or one color

Add-ons

Estimated cost for 600 sq ft in Washington (statewide), standard level

$6,500 to $9,250

About $10.50 to $15 per sq ft before permits. Labor is about 73% of the bill.

Cost breakdown
PartLowHigh
Materials$1,750$2,200
Labor$4,600$6,900
Permits and fees$100$170
Total$6,500$9,250
Save and get a PDF report

Cost breakdown for 600 sq ft in Washington

Part of the jobLowMidpointHighShare
Materials$1,450$1,950$2,50025%
Labor$2,900$5,750$8,60073%
Permits and fees$55$130$2102%
Total$4,400$7,850$11,300100%

Quality levels and sizes in Washington

The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Washington wages and prices. The grid prices the same bands at 4 common sizes.

Basic

$4,400 to $7,150

Plain gray, 4-inch broom finish, flat site

Standard

$6,500 to $9,250

5-inch with rebar and saw-cut joints, a border or one color

Premium

$8,550 to $11,300

6-inch for heavy vehicles, stamped or colored, grading needed

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,800 – $2,950$2,650 – $3,800$3,500 – $4,650
2-car (20x24), 480 sq ft$3,550 – $5,750$5,200 – $7,450$6,900 – $9,100
2-car + apron (600 sq ft)$4,400 – $7,150$6,500 – $9,250$8,550 – $11,300
3-car (900 sq ft)$6,550 – $10,700$9,650 – $13,800$12,800 – $16,900

Add-ons priced for Washington

Extras are quoted nationally and then scaled to Washington by the average of the local wage index (1.31) and goods index (1.04), a factor of 1.17. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add rebar reinforcement$700 – $2,100
Remove the old driveway$1,400 – $4,250

If you are planning more than one job in Washington

The table prices neighboring jobs at their usual sizes using statewide Washington wages and prices. Against national midpoints, asphalt driveway comes out highest (+21%) and concrete slab lowest (+16%), because each job leans on different trades.

Related projects with local prices
ProjectSizeRangevs. US
Asphalt driveway600 sq ft$3,600 – $9,050+21%
Gravel driveway1,000 sq ft$2,950 – $11,900+17%
Concrete slab400 sq ft$2,850 – $5,950+16%
Stamped concrete400 sq ft$3,800 – $9,400+18%
Paver patio300 sq ft$3,500 – $6,400+17%
Concrete patio300 sq ft$1,400 – $4,800+18%

Washington metro-by-metro prices

2 of the 7 metros sit above the statewide midpoint of $7,850, and the top-to-bottom gap is 10%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (600 sq ft)Midpointvs. state
Seattle, WA$4,550 – $11,800$8,150+4%
Bellingham, WA$4,450 – $11,500$7,950+1%
Yakima, WA$4,400 – $11,300$7,850level
Olympia, WA$4,350 – $11,200$7,750−1%
Kennewick, WA$4,300 – $11,100$7,700−2%
Bremerton, WA$4,300 – $11,100$7,700−2%
Spokane, WA$4,200 – $10,700$7,450−5%

Washington seasons and concrete driveway

Season matters for concrete driveway. For each Washington metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for pouring concrete.

Seattle has the longest comfortable season of the metros we cover in Washington at 8 months (April through November); Kennewick has the shortest at 3 (May through June and September). Rainfall runs from 8 inches a year in Kennewick to 57 inches in Bremerton.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Seattle3777388: April through November
Spokane2687175: May through September
Olympia3378516: May through October
Kennewick289383: May through June and September
Yakima249084: May through June and August through September
Bremerton3677577: April through October
Bellingham3473357: April through October

What cement masons and concrete finishers and the other trades earn in Washington

Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 4 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.31 for Washington.

For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $37.27 an hour, which is 36% above the national $27.41. The middle half of them earn between $28.31 and $47.25 an hour. BLS counts 4,440 of them working in the state, 12.5 for every 10,000 jobs (US: 13.3), so the local bench is about average.

Construction laborers (47-2061), 30% of the weighting: a median of $27.75 an hour, 22% above the US median of $22.66. The middle half of them earn between $22.56 and $34.69 an hour. About 25,060 work in the state. That is 70.6 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $39.28 an hour, which is 36% above the national $28.78. The middle half of them earn between $30.96 and $55.12 an hour. BLS counts 10,290 of them working in the state, 29.0 for every 10,000 jobs (US: 30.7), so the local bench is about average.

For carpenters (47-2031, weighted 10%) the local median is $35.67 an hour, which is 22% above the national $29.12. The middle half of them earn between $29.15 and $44.55 an hour. BLS counts 26,960 of them working in the state, 75.9 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.

A crew paid at the 75th percentile for cement masons and concrete finishers ($47.25 an hour) would add about $800 to the statewide midpoint; one at the 25th percentile ($28.31) would take off about $720. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 3,550,970 jobs across Washington (May 2025), which is 2.3% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Cement masons and concrete finishers (47-2051)50%$28.31$37.27$47.25$27.411.36state
Construction laborers (47-2061)30%$22.56$27.75$34.69$22.661.22state
Operating engineers and other construction equipment operators (47-2073)10%$30.96$39.28$55.12$28.781.36state
Carpenters (47-2031)10%$29.15$35.67$44.55$29.121.22state
Blended100%1.31

Washington against its neighbors

Washington ranks 4 of 51 (the 50 states plus DC) for concrete driveway, where 1 is the most expensive. The costliest is Hawaii at $9,600 and the cheapest Mississippi at $5,400, both for 600 sq ft at the midpoint. Washington sits at $7,850. The five states closest by workforce center are listed below.

States near Washington, same project and size
StateDistanceRangeMidpointvs. here
Oregon170 miles away$4,050 – $10,300$7,200−9%
Idaho380 miles away$3,550 – $9,000$6,250−20%
Montana500 miles away$3,700 – $9,450$6,600−16%
Utah650 miles away$3,550 – $8,950$6,250−20%
Nevada780 miles away$3,750 – $9,600$6,650−15%

Concrete driveway: what moves the price in Washington

  • Thickness

    HomeGuide prices a standard 4-inch driveway at $6-$15/sq ft and a 6-inch one, recommended for heavy vehicles, at $8-$20/sq ft.

  • Old driveway removal

    Tearing out the old surface adds about $2-$6 per sq ft, and some cities want the haul-off documented.

  • Grading and drainage

    Professional grading runs $3-$8 per sq ft or $700-$2,500 for a typical job. A sloped lot or poor soil raises it.

  • Finish

    Decorative driveways run $10-$25 per sq ft installed: colors and borders at $10-$15, stamped patterns at $15-$20, and high-end finishes at $20-$25+ (HomeGuide).

  • Permits and the apron

    A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,500 to $9,250 for Washington is attached.

Detailed concrete driveway report for Washington, $9

The report lays out the concrete driveway numbers for Washington line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Concrete driveway in Washington: your questions

+How much does it cost to pour a concrete driveway in Washington?

$4,400 to $11,300 for 600 sq ft, using statewide wages and prices. Metro areas inside Washington can sit above or below that.

+Which city in Washington is cheapest for concrete driveway?

Spokane at about $7,450 (midpoint, 600 sq ft). The priciest is Seattle at $8,150.

+Is concrete driveway cheaper in Washington than the US average?

It is 22% more expensive: $7,850 against $6,450 for 600 sq ft at the midpoint.

+What share of the price is labor in Washington?

About 73% ($5,750). Materials are 25%. Statewide labor for this job is weighted 1.31x the national wage level.

+What do cement masons and concrete finishers earn in Washington?

The BLS statewide median is $37.27 an hour, against $27.41 for the US. The 25th to 75th percentile range is $28.31 to $47.25.

+Where does Washington rank for concrete driveway costs?

4th most expensive of 51 (the 50 states plus DC) at the midpoint, $7,850 for 600 sq ft. Rank 1 is the costliest.

+What do basic and premium concrete driveway work cost in Washington?

For 600 sq ft, basic work runs $4,400 to $7,150 and premium work $8,550 to $11,300. Basic means: plain gray, 4-inch broom finish, flat site. Premium means: 6-inch for heavy vehicles, stamped or colored, grading needed.

+Does the season matter for concrete driveway in Washington?

Yes where winters or summers are hard. Of the Washington metros we cover, Seattle has the most comfortable months (8 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add rebar reinforcement" add in Washington?

$700 to $2,100 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.

Concrete driveway by city in Washington

Concrete driveway: all pricesWashington cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = SimplyWise's sample 600 sq ft, 4-inch driveway line ($1,400-$2,400 in materials) divided by 600 sq ft.